• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.
Got this one in today:

LOVE MEI smoked pull type metal bumper for GALAXY NOTE 3 - Love mei

All cut-outs are precise,volume rocker & power button both work very well,just the perfect amount of tension for ease of use w/o the sponginess for accidental pressing while pocketed/holstered/etc.....

As for feel-in-hand,all cases I've used push this to the edge,as the phone is large enough w/o a case,so,I can't be the judge as to how this would be for someone else.

The finish is flawless (GLOSS BLACK),however,I'm considering using the sand/bead blaster @ work to give it more of a matte finish/rougher texture,for a better,more secure feel-in-hand.

As for compatibility/fit,works w/the standard battery cover,as well as the QI-ENABLED OEM SAMSUNG Battery cover.However,it does not fit on extended battery covers for the HYPERION or ANKER 6400 Extended battery,due to the lack of contour/radius on the top & bottom of the extended battery cover.

As for protection,this is a bumper-only case,providing edge-only protection.There is ample protection on the front face of the bumper for screen protection when the phone is placed face-down on a surface.

I recommend this case,but,definitely look around for better pricing (e-Bay/AMAZON/MOBILE FUN.etc)......

Is that the one with the sliding top that secures the device inside?

They have different 'Love Mei' versions at the eBay UK link here, including the slider one, plus ones that secure with two small grommet screws in one corner. Way cheaper than $58 too.

SOLID ALUMINIUM METAL BUMPER CASE COVER FOR SAMSUNG GALAXY NOTE 3 N9000 N9005 | eBay
 
Upvote 0
Is that the one with the sliding top that secures the device inside?

They have different 'Love Mei' versions at the eBay UK link here, including the slider one, plus ones that secure with two small grommet screws in one corner. Way cheaper than $58 too.

SOLID ALUMINIUM METAL BUMPER CASE COVER FOR SAMSUNG GALAXY NOTE 3 N9000 N9005 | eBay

I've bought the non slider one and love it. Would be even better with buttons rather than cut outs. Keeps the phones OE profile and saves the frame getting damaged if dropped.
I bought UK item 121191668619.
 
  • Like
Reactions: KOLIO
Upvote 0
Is that the one with the sliding top that secures the device inside?

They have different 'Love Mei' versions at the eBay UK link here, including the slider one, plus ones that secure with two small grommet screws in one corner. Way cheaper than $58 too.

SOLID ALUMINIUM METAL BUMPER CASE COVER FOR SAMSUNG GALAXY NOTE 3 N9000 N9005 | eBay

Yes sir,it is.This is definitely a more practical option vs some other 2-piece aluminum bumpers that have the screws holding it together.

It's a nice bumper,as for added size,it's not a low profile bumper,but doesn't add as much,compared to this TPU one:

Amazon.com: Bear Motion for Galaxy Note 3 - Premium Bumper Ring Case for Samsung Galaxy Note 3 Note III (Black) (Black): Cell Phones & Accessories

As w/any metal cases,this one has some rather crisp edges vs a more contoured/rounded shape.Not necessarily a bad thing,but,I've found this can be tiresome if you're one to use your phone for a greatly extended period of time throughout the day.Not an issue w/horizontal use,but,could be when gripping in the vertical for an extended period.
Of course,if your hand size is above average,all of this becomes a non-issue.

Either way,it's a nice looking & excellent fitting bumper case.You won't be disappointed should you choose to get one for yourself.
 
  • Like
Reactions: Scootmien
Upvote 0
Thanks Kolio. As my post somewhere i this thread says, i am looking at a bumper possibly to go with an OEM charging cover, if/when I decide to get that.

I've got the Spigen Neo Hybrid Satin Silver arriving tomorrow which will do me in the meantime.

I'm currently using an unbranded TPU case that is both cheap and nasty but does protect the phone, which turned up yesterday afternoon.
 
Upvote 0
First of all the packaging. Thank goodness these cases ship in easy to open plastic packaging. No knife, scissors, or hammer and chisel required.
20131115_122608_zps37f67598.jpg

20131115_122648_zpsf6f4deef.jpg


Out of the packaging:
20131115_122844_zpsc7bbca2c.jpg

20131115_122917_zpse7aeacdd.jpg


Cases open :
20131115_123050_zps65b4b822.jpg


That's it for now.
 
Upvote 0
Found a couple bumper cases that intrigued me on ebay:

Samsung Galaxy Note 3 III Lucent Wrap Film Two Tone Hybrid Case Cover Prytool | eBay

Ultra Thin Full Body Defender Builders Gel Case Cover for Samsung Galaxy Note 3 | eBay

Hard Hybrid Full Bumper Built in Screen Protector Case for Samsung Galaxy Note 3 | eBay

Cheapest one I found
http://www.ebay.com/itm/For-Samsung...Cell_Phone_PDA_Cases&var=&hash=item43c1fca456

The thing that intrigued me the most on these cases is the built in screen protector, which is part of the actual bumper. I haven't read any reviews, to see how responsive it is, but I might take a stab at getting one later down the line. I'll continue searching for the thinnest form factor, that also provides full coverage on the sides, top, and bottom. I love the case I currently use, but hopefully the cases on the way will also cover the bottom more than my current case.
 
  • Like
Reactions: KOLIO
Upvote 0
i decided to go with the Spigen Bounce cover, and received it today.
I gotta admit, it fits GREAT and is quite slim. i like it a lot more than i expected! 5*

I am also using a Spigen Bounce, it's far better looking in person than on the site. I really like how it covers the buttons so as to prevent accidental press's, while leaving them very easy to use.

It doesn't attract pocket lint, and it doesn't stretch like lower quality TPU cases. Holding it's shape perfectly after weeks of use, I'm completely happy with it.
 
Upvote 0
I got my UAG few days ago and am trying it out. Pretty nice case, def makes phone more bulky in comparison to my neo hybrid but will protect it more then the Neo of course. I like both cases , will probably use both alot, both fit tight and snug, buttons, cutouts etc. I tried the screen protector that came with UAG and totally butchered it, lol.
Anyways, I like both the UAG and Nep Hybrid alot. Both will serve their purposes.
 
  • Like
Reactions: KOLIO
Upvote 0
Has anyone found a "sock" type protector that fits the n3?

I'm looking for something
-that has a foam-like protective interior (giving a little protection)
-no leather
-no clips or starps, so the phone can be easily sled out (is "sled" the correct word??)

Basically, something a bit like this:
$%28KGrHqFHJBMFGv0Urg5DBR0U+,7sT!~~60_35.JPG


I've been trying to browse trough various sites, but so far, no luck. :(
 
Upvote 0
Finally got a picture of the phone in the case to share;



This case is surprisingly well made for something that costs $7.99. The stitching is perfect and holes line up all the way around. The credit/business card holders are actual pockets not just slots in the material and the pocket behind them fits 3 folded over US bills without any issues with the closure. This is a pretty good case for those formal occasions when you don't necessarily need high drop protection. It looks really good and not at all feminine as I thought it might just from seeing it online. This is an interior shot of the Mint/Navy version. I'm thinking of getting rid of the Black/Brown version. Any takers? I'll send it anywhere in the US for $10.00 cash.
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones