Some people seem to be breaking their phones as of late and were not able to find the files i posted before this device got root, so im going to make them into a thread.
These files were leaked to me by a metropcs employee and are pre-release software. they function just fine, the issue is you cant update from it so you are quite literally stuck forever on it if you flash it. good news is your phone will be booting and working again though.
DOWNLOAD:/B]
http://www.shabbypenguin.com/files/Samsung-MetroPCS/Admire-4G/
Instructions:
1) Download those two files
2) Ensure you have the samsung drivers installed
3) Extract the odin zip
4) Right click on odin and choose run as administrator
5) Put your device into download mode (im terribly sorry but i dont recall how exactly on this phone, i believe its vol down + power while it boots then vol up to confirm)
6) Once you have the "downloading" screen connect the phone
7) Ensure your device's drivers install and a COM number appear in the box
8) Click on PDA and select the CR820_FF02.tar
9) Click start
It will take a while but you will eventually be all set and back to booting, as i said this is prelaunch firmware so you may have issues/bugs, you may not.
These files were leaked to me by a metropcs employee and are pre-release software. they function just fine, the issue is you cant update from it so you are quite literally stuck forever on it if you flash it. good news is your phone will be booting and working again though.
DOWNLOAD:/B]
http://www.shabbypenguin.com/files/Samsung-MetroPCS/Admire-4G/
Instructions:
1) Download those two files
2) Ensure you have the samsung drivers installed
3) Extract the odin zip
4) Right click on odin and choose run as administrator
5) Put your device into download mode (im terribly sorry but i dont recall how exactly on this phone, i believe its vol down + power while it boots then vol up to confirm)
6) Once you have the "downloading" screen connect the phone
7) Ensure your device's drivers install and a COM number appear in the box
8) Click on PDA and select the CR820_FF02.tar
9) Click start
It will take a while but you will eventually be all set and back to booting, as i said this is prelaunch firmware so you may have issues/bugs, you may not.
Last edited: