• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [Boost Mobile] [ROM][NDC][STOCK][4.4.2][KITKAT][ROOTED][ODEXED/DEODEXED]- Virgin Mobile/Boost Mobile

I flashed this but I have no date what so ever.... I can't even connect to wifi. can someone help me?

Yeah you're probably gonna need to provide some more info.

Like exactly step for step what you have done so far, so we can see what might have gone wrong and help you out.

Off hand kinda sounds like the connection issues I had to work through (read my post #48 above).
 
Upvote 0
Yeah you're probably gonna need to provide some more info.

Like exactly step for step what you have done so far, so we can see what might have gone wrong and help you out.

Off hand kinda sounds like the connection issues I had to work through (read my post #48 above).

I flashed the stock odexed rom over CLEAN stock because i intitally formatted /system in recovery by accident and it wouldn't boot back up.

So i flashed that, it booted back up but i had no data, no radio. So iflashed the modem, i now have radio but i have no data. I switched to 3G and the icon pops up but i still can't surf the web. I flash the modem again, nothing. I tried everything. I just have no data. I can call and text though.

EDIT: just realized i was in Boost Mobile forum, i have virgin mobile lol. guess rules still apply though, right?
 
Upvote 0
I flashed the stock odexed rom over CLEAN stock because i intitally formatted /system in recovery by accident and it wouldn't boot back up.

So i flashed that, it booted back up but i had no data, no radio. So iflashed the modem, i now have radio but i have no data. I switched to 3G and the icon pops up but i still can't surf the web. I flash the modem again, nothing. I tried everything. I just have no data. I can call and text though.

EDIT: just realized i was in Boost Mobile forum, i have virgin mobile lol. guess rules still apply though, right?


So not clear from your response about "CLEAN stock"; did you Odin the stock NDC tar or already have the OTA 4.4.2 update?

What does it say under Baseband version?

That modem may take 2 or 3 shots to get it to take. If it isn't working after 3 tries you probably need to start the process over again beginning with Odining the tar.

I had to go through the whole process several times to get everything to take. Check the baseband version and conection at each step as you go through. My first pass i had Unknown on baseband version after i got done flashing everything. 2nd time i had right baseband & I had connection after odin the tar, lost connection it after flashing the deodexed and finally regained after 2 modem flashes.

Yeah this is Virgin/Boost thread cause ROM works for both.
 
Upvote 0
So not clear from your response about "CLEAN stock"; did you Odin the stock NDC tar or already have the OTA 4.4.2 update?

What does it say under Baseband version?

That modem may take 2 or 3 shots to get it to take. If it isn't working after 3 tries you probably need to start the process over again beginning with Odining the tar.

I had to go through the whole process several times to get everything to take. Check the baseband version and conection at each step as you go through. My first pass i had Unknown on baseband version after i got done flashing everything. 2nd time i had right baseband & I had connection after odin the tar, lost connection it after flashing the deodexed and finally regained after 2 modem flashes.

Yeah this is Virgin/Boost thread cause ROM works for both.

I had the OTA update already before i rooted my phone and formatted /system

so i thought all i had to was just flash the odexed and modem and it would be fine. because before i flashed the modem i had NOTHING no radio, no service. I flash the modem and service came back just no data. I would flash the tar but the website is blocked at my school and i live on campus. If i download via my phone, could i flash the tar using mobile odin?

baseband is L710VPUCNDC
 
Upvote 0
No i wouldn't use mobile Odin. There's a bunch of warnings in the xda thread to not do that.

I would make sure to be checking the md5sum on your downloads also. Been a bunch of people having not ding that cause issues.

Okay i'll download the tar and flash via odin desktop. I just hope it fixes the data issues. I can't get my contacts.

So to make sure. You odin the tar, flashed rom then modem and the first time it gave no baseband.. second time you did those three steps you got both baseband and data connection, but after flashing the deodexed rom you lost data connection but regained after two flashes of the modem alone in recovery?
 
Upvote 0
Odin tar. Then odin a recovery, most of us are using philz. (Sorry can't find link from my phone) I'm using philz d2lte v6.48.4

Rest is correct.

I odin back to stock tar but i still have no data. this is so fustrating

it keeps showing "(check mark) System Update..." in the status bar. it's not allowing me to update my PRL, Profile or Firmware.
 
Upvote 0
I odin back to stock tar but i still have no data. this is so fustrating

it keeps showing "(check mark) System Update..." in the status bar. it's not allowing me to update my PRL, Profile or Firmware.

Man, that should've put the stock APNs back and connected. If this is happening on EVERY ROM flashed, there might be a hardware issue with the radio antennae. I assume you don't have another phone to try it out on.

Cuz when i flash and get no data, i always flash wicked our conquest and everything is fine again. Those 2 just seem to have the correct files my particular phone loves.

Keep us updated!
 
Upvote 0
I odin back to stock tar but i still have no data. this is so fustrating

it keeps showing "(check mark) System Update..." in the status bar. it's not allowing me to update my PRL, Profile or Firmware.

steelyus1 is right, something is off here. the 3 possibles are, hardware, software, dennytechno (no offense, 90% of my computer problems are me :eek:). My thoughts are that since the hardware was working before you started it's prolly not hardware and we can't help with the hardware so much anyway, so lets try to eliminate the other 2 first.

Suggestions;

try flash stock Rom again - check md5sum first to make sure you have good download.

Try stock ROM from another source like Sammymobile (you will have to create a free account) Install instructions are below.

Try the Wicked or Conquest ROM's - check md5sum first to make sure you have good download. Also note according to bilgerryan for Wicked-X you may need to flash ND8 tar first cause it uses ND8 boot loader, read the OP.


FYI - Also if you get the stock working you can root it from Philz.


Sammymobile Firmware Installation Instructions

Extract (unzip) the firmware file
Download Odin (I prefer v3.07) If you want another version look here
Extract Odin zip-file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
 
  • Like
Reactions: steelyus1
Upvote 0
steelyus1 is right, something is off here. the 3 possibles are, hardware, software, dennytechno (no offense, 90% of my computer problems are me :eek:). My thoughts are that since the hardware was working before you started it's prolly not hardware and we can't help with the hardware so much anyway, so lets try to eliminate the other 2 first.

Suggestions;

try flash stock Rom again - check md5sum first to make sure you have good download.

Try stock ROM from another source like Sammymobile (you will have to create a free account) Install instructions are below.

Try the Wicked or Conquest ROM's - check md5sum first to make sure you have good download. Also note according to bilgerryan for Wicked-X you may need to flash ND8 tar first cause it uses ND8 boot loader, read the OP.


FYI - Also if you get the stock working you can root it from Philz.


Sammymobile Firmware Installation Instructions

Extract (unzip) the firmware file
Download Odin (I prefer v3.07) If you want another version look here
Extract Odin zip-file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes


A few minutes is wrong. It's taken anywhere from 10 to 14 minutes to flash the stock image. It's important to let people know that so they don't think the flash has gone wrong.

I came very close to pulling the plug when I flashed the Sprint version months ago because no one had yet given a time frame for the flash. This is the longest Odin firmware flash I've ever done on a phone.
 
Upvote 0
A few minutes is wrong. It's taken anywhere from 10 to 14 minutes to flash the stock image. It's important to let people know that so they don't think the flash has gone wrong.

I came very close to pulling the plug when I flashed the Sprint version months ago because no one had yet given a time frame for the flash. This is the longest Odin firmware flash I've ever done on a phone.

Yeah thanks wetbiker7

That "few minutes" instruction is from the Sammymobile site - that's the problem with free information, sometimes it's worth just what you paid for it.

I remember seeing that "it takes 15 minutes to flash" in one of the threads, can't remember if it was this ROM over on XDA or the Wicked thread...

I didn't take anywhere near that when I've flashed it, prolly around 6 mins, and I've Odin'd the NDC/ND8 tar or Sammymobile stock 4-5 times.

So anyway - Be Warned - YOUR MILEAGE MAY VARY on the install times. :smokingsomb:
 
Upvote 0
Yeah thanks wetbiker7

That "few minutes" instruction is from the Sammymobile site - that's the problem with free information, sometimes it's worth just what you paid for it.

I remember seeing that "it takes 15 minutes to flash" in one of the threads, can't remember if it was this ROM over on XDA or the Wicked thread...

I didn't take anywhere near that when I've flashed it, prolly around 6 mins, and I've Odin'd the NDC/ND8 tar or Sammymobile stock 4-5 times.

So anyway - Be Warned - YOUR MILEAGE MAY VARY on the install times. :smokingsomb:

Yeah. What you read was probably one of the discussions I had with JDsingle. As far as I know he and I were the 1st ones to mention the length of time it took to flash the stock image. It took him right at 15 minutes and took me over 10. This was before Boost had even released their update. We flashed the Sprint ND8 image.
 
Upvote 0
Yeah. What you read was probably one of the discussions I had with JDsingle. As far as I know he and I were the 1st ones to mention the length of time it took to flash the stock image. It took him right at 15 minutes and took me over 10. This was before Boost had even released their update. We flashed the Sprint ND8 image.

I personally don't find that excessively long with flashing a stock .tar, with everything its doing. But, the caveat is i was told back when after doing it the first time. And i did see biker's and single's warnings first hand in here.
 
Upvote 0
steelyus1 is right, something is off here. the 3 possibles are, hardware, software, dennytechno (no offense, 90% of my computer problems are me :eek:). My thoughts are that since the hardware was working before you started it's prolly not hardware and we can't help with the hardware so much anyway, so lets try to eliminate the other 2 first.

Suggestions;

try flash stock Rom again - check md5sum first to make sure you have good download.

Try stock ROM from another source like Sammymobile (you will have to create a free account) Install instructions are below.

Try the Wicked or Conquest ROM's - check md5sum first to make sure you have good download. Also note according to bilgerryan for Wicked-X you may need to flash ND8 tar first cause it uses ND8 boot loader, read the OP.


FYI - Also if you get the stock working you can root it from Philz.


Sammymobile Firmware Installation Instructions

Extract (unzip) the firmware file
Download Odin (I prefer v3.07) If you want another version look here
Extract Odin zip-file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes

So sorry i haven't been able to get back to you guys
but i got everything working again, i dialed ##72786#,it resetted my number and i clicked"Activate Phone" in the More settings and it rebooted, my 4G came back within in a minute. Thanks for your help!
 
Upvote 0
I personally don't find that excessively long with flashing a stock .tar, with everything its doing. But, the caveat is i was told back when after doing it the first time. And i did see biker's and single's warnings first hand in here.

Yep. The main reason I mentioned the amount of time it took was to let others know so they wouldn't freak out and pull the plug thinking their phone had locked up. Anytime you pull the plug on a major flash like that you run a very high risk of bricking the device. I would've hated to see that happen to anyone.

I agree with you. When you consider the size of the image and the fact that it's actually upgrading everything, it doesn't take an excessive amount of time. It just caught me off guard because it took longer than any of the other Odin images I've flashed in the past. ;)


So sorry i haven't been able to get back to you guys
but i got everything working again, i dialed ##72786#,it resetted my number and i clicked"Activate Phone" in the More settings and it rebooted, my 4G came back within in a minute. Thanks for your help!

Thats awesome! I'm glad you were able to get it fixed. :)
 
  • Like
Reactions: steelyus1
Upvote 0
No correction needed bro. You hit the nail on the head.

He may be running a 4.4.2 ROM but unless his baseband/modem says either ND8 or NDC he is not running the true Kit Kat bootloader.

JD, I know you know this. I'm basically posting the info for others who do not.

Modman, if you go into settings and then look under about phone or about device, look where it says baseband. If the last 3 say ND8 or NDC then you are officially running the Kit Kat bootloader. If it says anything else then you are not and will need to manually flash it.

Thank you for this clarification. Now I know where I went wrong. I myself thought I was running the kit kat bootloader because of the 4.4.2 misconception. But hey, after a few mess ups, I'll know what not to do next time and end up a pro like I did with my Samsung Galaxy S2 epic 4G touch! At least I'm still able to run on wifi. Thanks guys for being so patient with us who are eager to learn.
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones