LG LEON LTE - MetroPCS (LGMS345) KDZ Firmware
I found a way to unbrick the Leon LTE for MetroPCS.
Standard disclaimer: This is for MetroPCS ONLY and is the MS34510D version. This guide is for people who have bricked their phone due to messing about with important files/partitions on their LG LEON LTE and found that it won't boot up and gets stuck in a boot loop. The method used in this guide should only be used as a last resort. Don't hold me responsible if this method doesn't restore your phone or makes it worse. THERE IS NO WAY TO DOWNGRADE BACK TO ver MS34510B after using this method.
Installed
LG United Mobile Driver 3.14.1
LG Flash tool 2014 (build 03/07/2014)
After flash tool installation
1. Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY) while connecting to USB Cable
3. The Volume up button needs to be held until it reaches download mode
4. Open device manager and changed the LGE Mobile USB Serial port to COM 20
5. Open the Flash Tool
6. Select Type: 3GQCT
7. PhoneMode: EMERGENCY
8. KDZ : MS34510D_00.KDZ
9. Click on Normal Flash
10. Click on Clear update registry
11. Country: different country
12. Language: English
13. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. You can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
Files needed:
LG Drivers: https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
LG Flash Tool: https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y
MS34510d kdz file: https://mega.nz/#!VNtDCb6C!wotJiiw1CfVNTlpxG3XRnsgiLNtUmzB6zj3tkraNB9s
I found a way to unbrick the Leon LTE for MetroPCS.
Standard disclaimer: This is for MetroPCS ONLY and is the MS34510D version. This guide is for people who have bricked their phone due to messing about with important files/partitions on their LG LEON LTE and found that it won't boot up and gets stuck in a boot loop. The method used in this guide should only be used as a last resort. Don't hold me responsible if this method doesn't restore your phone or makes it worse. THERE IS NO WAY TO DOWNGRADE BACK TO ver MS34510B after using this method.
Installed
LG United Mobile Driver 3.14.1
LG Flash tool 2014 (build 03/07/2014)
After flash tool installation
1. Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY) while connecting to USB Cable
3. The Volume up button needs to be held until it reaches download mode
4. Open device manager and changed the LGE Mobile USB Serial port to COM 20
5. Open the Flash Tool
6. Select Type: 3GQCT
7. PhoneMode: EMERGENCY
8. KDZ : MS34510D_00.KDZ
9. Click on Normal Flash
10. Click on Clear update registry
11. Country: different country
12. Language: English
13. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. You can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
Files needed:
LG Drivers: https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
LG Flash Tool: https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y
MS34510d kdz file: https://mega.nz/#!VNtDCb6C!wotJiiw1CfVNTlpxG3XRnsgiLNtUmzB6zj3tkraNB9s