I am posting this in hopes to get SuperR's help. I have seen what you can do and I think that you may be able to help me.
Lets begin...
Last week, after a very long time of not updating my to 4.4.2, I decided to update. I was at stock B07 when I made the jump. Immediately upon reboot, my home button would not work, nor was I able to hang up my calls. I had no access to the dialer period. I had to remove my battery in order to end the call. This was no good.
I had never rooted a phone before, and I was really looking to simply downgrade my system. Though possible, sources said that it would be best to probably just try using a custom rom. So I spent the next 14 hours learning as much as possible about rooting the N9510 ZTE Warp 4g. I love my phone, have had it since it's release and didn't want to get a new phone. I have a sponge mind, so I thought, how hard could this be? Well, turns out, it was not easy at all. Well, it was, but not by any way anyone had said on any of the forums. Before I went and factory restored my phone, I had tried everyway possible to root. Also, earlier that day, I went to clear the cache, but I thought it was frozen doing so, so I removed the battery. This caused a major error, and I could no longer access anything beyond the splash screen. I think this is called boot loop? Or maybe "soft brick"?
Philz wouldn't work, adb sideload wouldn't work (it is actually a recovery option within the stock CWM), I couldn't get to a custom CWM because before my phone went stupid, I did not enable USB Debugging. And I couldn't get any roms or recovery to install from stock recovery because "Signature Verification" was enabled. Just kept getting "improper footer, unverified signature" I finally had no other choice. I factory data restored. The problem still persisted though because it was an incapability issue with 4.4.2.
I tried everything to root this sucker, nothing would work. So, just when I thought my luck had run out, I found MobileGo. One click root. Somehow it found my device and connected. I rooted, then learned more about cwm. I downloaded flashify, made a backup image and flashed to Philz I believe. Turned off "signature verification", moved my B07 Stock Rom to my SDCard, and installed the rom via stock CWM. Low and behold, it worked! I had superuser access and I was ready to see what I could do. I started downloading all kinds of root access apps. I wanted to tinker. I am very much so a noob at this, and I did too much to quickly. I messed my phone up again. No worries right? I had USB Debugging active, and I could flashify directly to Philz. I may be mistaken about that. It might be TWRP. Either way, I could very easily flash a new rom. Unfortunately, just prior to this, I removed ADB and the drivers of my phone from my laptop, the last known working setup to which I could do all of this.
Upon attempting to flash the B12 deodexed and bloatware removed rom, I accidently flashed "recovery.img". I didn't think this would be such a huge problem. It is.
I no longer get to the splash screen. Only the Android screen. When using ADB, my device is "unauthorized" until I enter "install via adb sideload", then all of the roms do not work, because apparently "signature verification" is on again. When I factory data reset, it resets to the recovery.img that I flashed, so I have zero access to the OS. My device isn't found on the linux recovery (Philz??) (In which I am using VMware to access the Linux OS. Much easier than burning the ISO or making a bootable USB via Rufus. 30 day free trial). Simply put, I. Am. Stuck.
So here is my question: Is there a signed custom CWM that I can upload in order to turn off signature verification? This seems to be the most important problem. If I can solve this, everything can be fixed. Also, is there an OEM version of the B07 Stock that I can download from somewhere? This would obviously have a verified signature.
BTW, this post isn't specifically for SuperR. Bcrichster, DevilsChild26, Phenomx4 or any other developer that can help me with a work around, I would be thankful to.
If nothing else, can someone create a stock .img for me? I don't want to get a new phone, really. If this cant be conquered by tomorrow, I am going to get a Note Edge. Or maybe an S5. But I really don't want to. Please guys, give me something to hope for.
Thanks guys. I look forward to hearing from you.
-Joe
P.S. Oh, I forgot, is fastboot a viable option? Power+Volume Down gets to Stock Recovery, holding Power+both Volumes and the camera get me to a black screen with the red notification light. I can't remember what this is called, and I've only once gotten to FTM, but didn't understand what to do in that mode. Sorry if my understanding isn't showing. It's been a long day playing with all of this. Below is a list of all the downloads I have downloaded relating to fixing my problem.
Downloads:
adb setup 1.3
adb setup 1.4.2
android studio bundle 141.2117773
" " 141.2135290
apkinstaller
blade-fastboot-recovery (I know, its for the Blade)
Framaroot-1.9.3
JoinMe B32
JoinMePlus
Minimal _adb_fastboot_v1.3.1_setup
MobileGo-for-android
Myphoneexplorer_setup_v1.8.6
OneClick
Philz_touch_6.19.2-warplte
Qualcomm drivers
recovery.img
syncdroid
UniversalADBDriver
UniversalADBDriverSetup6
B07 stock unmodified
B12 unbloated and deodexed
Lets begin...
Last week, after a very long time of not updating my to 4.4.2, I decided to update. I was at stock B07 when I made the jump. Immediately upon reboot, my home button would not work, nor was I able to hang up my calls. I had no access to the dialer period. I had to remove my battery in order to end the call. This was no good.
I had never rooted a phone before, and I was really looking to simply downgrade my system. Though possible, sources said that it would be best to probably just try using a custom rom. So I spent the next 14 hours learning as much as possible about rooting the N9510 ZTE Warp 4g. I love my phone, have had it since it's release and didn't want to get a new phone. I have a sponge mind, so I thought, how hard could this be? Well, turns out, it was not easy at all. Well, it was, but not by any way anyone had said on any of the forums. Before I went and factory restored my phone, I had tried everyway possible to root. Also, earlier that day, I went to clear the cache, but I thought it was frozen doing so, so I removed the battery. This caused a major error, and I could no longer access anything beyond the splash screen. I think this is called boot loop? Or maybe "soft brick"?
Philz wouldn't work, adb sideload wouldn't work (it is actually a recovery option within the stock CWM), I couldn't get to a custom CWM because before my phone went stupid, I did not enable USB Debugging. And I couldn't get any roms or recovery to install from stock recovery because "Signature Verification" was enabled. Just kept getting "improper footer, unverified signature" I finally had no other choice. I factory data restored. The problem still persisted though because it was an incapability issue with 4.4.2.
I tried everything to root this sucker, nothing would work. So, just when I thought my luck had run out, I found MobileGo. One click root. Somehow it found my device and connected. I rooted, then learned more about cwm. I downloaded flashify, made a backup image and flashed to Philz I believe. Turned off "signature verification", moved my B07 Stock Rom to my SDCard, and installed the rom via stock CWM. Low and behold, it worked! I had superuser access and I was ready to see what I could do. I started downloading all kinds of root access apps. I wanted to tinker. I am very much so a noob at this, and I did too much to quickly. I messed my phone up again. No worries right? I had USB Debugging active, and I could flashify directly to Philz. I may be mistaken about that. It might be TWRP. Either way, I could very easily flash a new rom. Unfortunately, just prior to this, I removed ADB and the drivers of my phone from my laptop, the last known working setup to which I could do all of this.
Upon attempting to flash the B12 deodexed and bloatware removed rom, I accidently flashed "recovery.img". I didn't think this would be such a huge problem. It is.
I no longer get to the splash screen. Only the Android screen. When using ADB, my device is "unauthorized" until I enter "install via adb sideload", then all of the roms do not work, because apparently "signature verification" is on again. When I factory data reset, it resets to the recovery.img that I flashed, so I have zero access to the OS. My device isn't found on the linux recovery (Philz??) (In which I am using VMware to access the Linux OS. Much easier than burning the ISO or making a bootable USB via Rufus. 30 day free trial). Simply put, I. Am. Stuck.
So here is my question: Is there a signed custom CWM that I can upload in order to turn off signature verification? This seems to be the most important problem. If I can solve this, everything can be fixed. Also, is there an OEM version of the B07 Stock that I can download from somewhere? This would obviously have a verified signature.
BTW, this post isn't specifically for SuperR. Bcrichster, DevilsChild26, Phenomx4 or any other developer that can help me with a work around, I would be thankful to.
If nothing else, can someone create a stock .img for me? I don't want to get a new phone, really. If this cant be conquered by tomorrow, I am going to get a Note Edge. Or maybe an S5. But I really don't want to. Please guys, give me something to hope for.
Thanks guys. I look forward to hearing from you.
-Joe
P.S. Oh, I forgot, is fastboot a viable option? Power+Volume Down gets to Stock Recovery, holding Power+both Volumes and the camera get me to a black screen with the red notification light. I can't remember what this is called, and I've only once gotten to FTM, but didn't understand what to do in that mode. Sorry if my understanding isn't showing. It's been a long day playing with all of this. Below is a list of all the downloads I have downloaded relating to fixing my problem.
Downloads:
adb setup 1.3
adb setup 1.4.2
android studio bundle 141.2117773
" " 141.2135290
apkinstaller
blade-fastboot-recovery (I know, its for the Blade)
Framaroot-1.9.3
JoinMe B32
JoinMePlus
Minimal _adb_fastboot_v1.3.1_setup
MobileGo-for-android
Myphoneexplorer_setup_v1.8.6
OneClick
Philz_touch_6.19.2-warplte
Qualcomm drivers
recovery.img
syncdroid
UniversalADBDriver
UniversalADBDriverSetup6
B07 stock unmodified
B12 unbloated and deodexed