Help Note 10.1 n8010 showings downloading mode

[explorerhead]

hello mates, please help
I recently tried to upgrade mannualy my samsung note 10.1 n8010 using odin. Things went perfect during the proceas and the outcomes were as expected till i got pass confirmation on the odin app, i have waited a long for the auto reboot and was not happening at all and after a while i tried mannyally turn of the tablet and now it is opening up to downlod mode . I tried powerbotton + volume up startup , power botton +volume down startups and power botton + both volume botton startup but its not helpong me. The device is going directly to downloding mode irrespective of combinationand please note i am not getting samsung logo either, kindly help, she is very special to me

 

[Bg260]

It is going to download mode because you borked it. Download the appropriate firmware below and reflash. No upgrade.


http://www.sammobile.com/firmwares/database/GT-N8010/

 

[explorerhead]

It is going to download mode because you borked it. Download the appropriate firmware below and reflash. No upgrade.


http://www.sammobile.com/firmwares/database/GT-N8010/

Hello mate,
I have downloaded the suggested firmware from the above link . Please see the below settings from the screenshot and confirm, so that i can proceed, let me know if i am missing any checkboxes.

 

[Bg260]

Hello mate,
I have downloaded the suggested firmware from the above link . Please see the below settings from the screenshot and confirm, so that i can proceed, let me know if i am missing any checkboxes.

Looks great, let her rip. What's the worst that can happen?

Let me know if it works.

 

[explorerhead]

Its getting failed
Below are the logs
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUDNF3_N8010OJVDNF3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

 

[Bg260]

First, are you sure you got the right firmware? Second, try a different usb cable.

@explorerhead
These are instructions for a different device, but if that is your firmware you should be able to use SmartSwitch.

 

[explorerhead]

Regarding the firmware , yes i am sure about it. But i need to arrange a new cable to check, i will keep u posted with the results. Thanks mate for the support

 

[explorerhead]

Regarding the firmware , yes i am sure about it. But i need to arrange a new cable to check, i will keep u posted with the results. Thanks mate for the support

One more option down

 

[Bg260]

Darn!

One more option down

 

[Jfalls63]

With Smart Switch, select the More tab in the upper right.
Select Software Update and Initialization, may be worded differently.
Enter your model number and SN when prompted. Can find on the box if you still have it or maybe on lower back of tablet.
If your device is supported, then connect to PC with tab in download mode.

 

[Bg260]

Thanks, I was about to ping you.

 

[Jfalls63]

This is the guide I usually post for Kies3. Works the same for Smart Switch but instead of Tools, it's under the More Tab.
http://www.samsung.com/ca/support/skp/faq/1072789

 

[Jfalls63]

@explorerhead, what country firmware did you download from Sammobile?

 

[explorerhead]

@explorerhead, what country firmware did you download from Sammobile?

United arab emirates

 

[explorerhead]

United arab emirates

Thanks jfalls60 and bg260, i feel more powered with the threads, will check abd update

 

[Jfalls63]

United arab emirates

Is that where the tablet was originally purchased?

 

[explorerhead]

Is that where the tablet was originally purchased?

Yes

 

[explorerhead]

@Bg260 @Jfalls63 i broght new cable and tried using smart switch but its unsupportrd

 

[Jfalls63]

You can try flashing the stock firmware with Odin again. Fail after Nand Write Start is usually not a good sign, hopefully nothing is wrong with the motherboard.

 

[Jfalls63]

Which version of Odin are you using?
Should be a link to 3.11 near the bottom of the Sammobile download page for the firmware.

 

[explorerhead]

Which version of Odin are you using?
Should be a link to 3.11 near the bottom of the Sammobile download page for the firmware.

coudn't find 3.11. but i tried 3.10. and its shooting the same error.
now i am trying 3.12
from the following link.

http://forum.xda-developers.com/android/software/odin-3-12-3-worlds-att-s7-odin-firmware-t3401470

 

[Jfalls63]

Could also try a different PC if one available

 

[explorerhead]

already tried with different pc.
below are the logs with odin 3.12
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

 

[explorerhead]

@Jfalls63 can u advice if its okey to try the process defined on the below link

http://forum.xda-developers.com/chef-central/android/nand-write-start-fail-odin-soluction-t2851096

 

[Jfalls63]

I was actually looking at the same thread. A little beyond my PC abilities.
Another thing I was thinking is to download the firmware again. Even though Odin says MD5 check ok , there might be something wrong with the download.