Help HSDPA Support

Yathushan · Mar 13, 2010

Hi, i was just wondering whether anyone know if it is possible for the samsung i7500 to recieve HSDPA? And if so how can I alter my phone to get the signals?
Because my area is supported for both 3G and HSDPA coverage but I only get EDGE. However, when I go clloser to my town centre I receive 3G signals but I have never seen the H sign on my phone.

Thank You

Deleted User · Mar 13, 2010

It depends on which software You use.. On GalaxHero there is 'H' icon, od stock rom there is '3G' icon... They both means the same!

I have problems with stability of my mobile networks (not wifi)... I am connected to the 3G network, but every time I want to reload a page I need to wait for like 5 seconds just to start reloading it... I guess my phone connects to network each time I want to do sometning on the net?!
Btw I use galaxhero (1.5)!

Could our problems be related? Any solutions?

Rastaman-FB · Mar 13, 2010

hdspa displays as 3g on the standard roms.

if you are not getting any 3g or hdspa signal at all in your area then its a problem in your area as you have proven that it works in town.

Yathushan · Mar 13, 2010

The thing is that o2 shows that have both HSDPA and 3G coverage over my house. So it kind of doesn't make sense.

Naruvam · Mar 13, 2010

Yathushan said:
The thing is that o2 shows that have both HSDPA and 3G coverage over my house. So it kind of doesn't make sense.

And network carriers never lie about how big is their coverage right?

Yathushan · Mar 13, 2010

Lol fair enough. Is there any way to identify whether my phone is using HSDPA or 3G? Also is ther
e anyway to switch on and off the HSDPA?

Yathushan · Mar 13, 2010

Lol fair enough. Is there any way to identify whether my phone is using HSDPA or 3G? Also is ther
e anyway to switch on and off the HSDPA?

Andronix · Mar 13, 2010

There will be an 'H' icon instead of '3G' when connected to HSDPA.

Rastaman-FB · Mar 14, 2010

Andronix said:
There will be an 'H' icon instead of '3G' when connected to HSDPA.

not on stock 1.5 andronix
i have hsdpa in my house. if i use galaxhero without a theme it shows as H
if i use stock firmware or darkstar theme it shows 3g

i can confim this also as i work directly under a big hsdpa mast for o2

photon00 · Mar 14, 2010

Thanks for the confirmation Livingcode and Rastaman. I was planning on asking about this after seeing H->3g when going from Galaxo to stock 1.6

ch424 · Mar 15, 2010

Download a speedtest app. If it says more than 384kb/s, you're getting HSDPA!

On a different note, has anyone ever managed to get HSUPA? I'm on t-mobile, who claim to support it, but I've never managed to upload faster than 128kb/s.

This is annoying when I can happily download at 1500kb/s.

damuffinman · Mar 15, 2010

ch424 said:
Download a speedtest app. If it says more than 384kb/s, you're getting HSDPA!

On a different note, has anyone ever managed to get HSUPA? I'm on t-mobile, who claim to support it, but I've never managed to upload faster than 128kb/s. This is annoying when I can happily download at 1500kb/s.

Got it once when I tried a speedtest at 3 in the morning. Download: 1948kb/s, Upload 560kb/s. I'm with Vodafone.

Yathushan · Mar 15, 2010

Your right o2 must be lying about their HSDPA coervage because the map shows that my work is covered by the signal but I when I tested it I got 150.4 kp/s down and 123.1 kb/s up. However, if I view it in kbps i get 1203 kbps down and 985 kbps up. Which one should I be looking at?? And if it is slow is there any way to enhance recieveing the signal? Also, is there any way to alter my phone so that I know that I am recieveing HSDPA signals?

Thank You

damuffinman · Mar 15, 2010

Yathushan said:
Your right o2 must be lying about their HSDPA coervage because the map shows that my work is covered by the signal but I when I tested it I got 150.4 kp/s down and 123.1 kb/s up. However, if I view it in kbps i get 1203 kbps down and 985 kbps up. Which one should I be looking at?? And if it is slow is there any way to enhance recieveing the signal? Also, is there any way to alter my phone so that I know that I am recieveing HSDPA signals?

Thank You

You're mistaking bits and bytes. Remember, 8 bits to 1 byte = 8kb = 1KB

Your speed test is quite reasonable (well, for O2). A speed of 1203 kb/s = 1.2Mbps. Divide that by 8 and you get 150KB/s. 1.2Mbps is definitely 3.5G/HSDPA speeds.

The same goes for uploading.

zoomee · Mar 15, 2010

Due to the way 3G works (HSDPA is just an extension of it) -the more devices connected to a mast - the weaker the signal gets. hth.

Its all just marketing hype by the big telcos - I've got 7.2mb/s, I've got 3.2mb/s - but no hang on - I'm gunna sue you for false advertising (happened to vodafone not too long ago lol)

Help HSDPA Support

Well-Known Member

Deleted User

Guest

Extreme Android User

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Android Enthusiast

Extreme Android User

Well-Known Member

Newbie

Well-Known Member

Well-Known Member

Well-Known Member

Lurker

BEST TECH IN 2023

Smartphones

Best Android Phones

Upcoming

Best iPhones

Upcoming

Tablets

Best Tablets

Upcoming

Laptops

Best Laptops

Upcoming

Televisions

Best TVs

Upcoming

Game Consoles

Best Game Consoles

Upcoming

Wearables

Best Wearables

Upcoming

Smart Home

Smart Home Tech

Upcoming

Similar threads