[Verizon] [rom]jbsourcery v5.4-lte[06/07/13] jb4.2.2 The Final Call

The_Chief · Oct 11, 2012

Okay, let me make a nandroid and work on this... back in a bit with results...

Once more the proud guinea pig!

viper689 · Oct 11, 2012

Unfortunately, JBSourcery again was buggy for me and I've got to jump ship once again. Which is a shame because the dev team and the work they've all put into this ROM are simply stunning. Here's to hoping that Team Sourcery can sustain their quality, and more importantly, their class. Cheers!

eagle1967 · Oct 11, 2012

viper689 said:
Unfortunately, JBSourcery again was buggy for me and I've got to jump ship once again. Which is a shame because the dev team and the work they've all put into this ROM are simply stunning. Here's to hoping that Team Sourcery can sustain their quality, and more importantly, their class. Cheers!

Any chance of letting us know what these bugs were so we can look into them.

kinfolk248 · Oct 11, 2012

Like this post if you think this rom rocks!

bigbear6708 · Oct 11, 2012

Viper, how long after you on Rom...i got some lag and Stutter, then just wiped both cache...No problems since...Also what kernel do you run? It may be as simple as the lmk settings the dev uses.

viper689 · Oct 12, 2012

eagle1967 said:
Any chance of letting us know what these bugs were so we can look into them.

1 - Battery remaining percentage. On the lockscreen, the battery percentage never matched my actual percentage remaining. It was always 10-15% off, or if the actual charge was below 20%, the lockscreen percentage would just read 0%. I had this same issue when I was running JBSourcery 1.0. Not a big deal to most, but it always bugs me

2 - LightFlow was not working for me on JBSourcery, nor were the built-in LED settings. LightFlow would work for a few hours, then stop working and I wouldn't be able to see the LED flash despite having an email, or text, or etc... The built in settings always had the LED flashing, whether the screen was on or off, had a notification or not. I need the LED to work so that when I'm at work, I know if it's urgent or not.

3 - Battery life. I know this one's a complaint for everyone on every ROM, but I've had better life on other ROMs. The idle drain on this was pretty ugly. Could be the kernel, I don't know, but something wasn't working.

As much as I want this ROM to work, there's a few bugs that, for lack of a better word, bug me. For the record, I was using Lean Kernel 4.4stable and with no kernel mods. I've also never dirty flashed any ROM, ever.

I hope the devs don't take this negatively as I really do like the ROM and am not trying to badmouth them or anything, just a list of things that for whatever reason weren't working for me. Hopefully only good will come from this.

teddyearp · Oct 12, 2012

Well, this _might_ be a bit OT for this thread, but I would like to address viper689 and everyone else's 'battery life' issues before I post again my feature request(s). I should almost post this in my own thread. . . .

For this phone, spend the extra $40 (or less if you can, I got it for ~ $35 on eBay) for the OEM spare battery and charger kit. I have been doing this for the last seven years with all my phones. I have always got phenomenal battery life by doing this (and on this phone I have got 48hrs on ICS roms and 36hrs on JB roms). Having a spare battery charging in a battery only charger, when the battery dies in your phone, switching it out with your fresh battery is immensely better for all your battery lives. Last point. THAT LITTLE USB PORT ON YOUR PHONE IS FOR HACKING ONLY!!! If you use it to charge your battery as well, your battery will not charge nearly as well and you WILL prematurely wear out the contacts. Just sayin' . . . and IMHO.

p.s. @viper: I'm on 2.3 and when it's all properly set up (though it does take some experimenting), I don't have any problems with the native LED and Lightflow notifications.

teddyearp · Oct 12, 2012

OK, I feel like I'm almost a broken record in this. I'm still on 2.3, haven't tried any of the 2.3.x, but haven't had any answer about the WiFi text option for % instead or in addition to -dBm.

And while I'm at it, is there any way to get any 'previews' in the fonts section? Right now I use FontInstaller, since it does offer this, so no big deal.

But I hope I'm not squeaking too much, but my WiFi % request has not been responded to in the last; what two, three, four times?

p.s. Chizzle, you look to be a Jeeper.

eagle1967 · Oct 12, 2012

teddyearp said:
OK, I feel like I'm almost a broken record in this. I'm still on 2.3, haven't tried any of the 2.3.x, but haven't had any answer about the WiFi text option for % instead or in addition to -dBm.

And while I'm at it, is there any way to get any 'previews' in the fonts section? Right now I use FontInstaller, since it does offer this, so no big deal.

But I hope I'm not squeaking too much, but my WiFi % request has not been responded to in the last; what two, three, four times?

p.s. Chizzle, you look to be a Jeeper.

ok we keep track of every request. We just dont reply to every request unless we have a for certain answer. so on the % not at this time but its on our list to look at.

the fonts are all previews wait for it to populate and the font name comes up as it will look.

eagle1967 · Oct 12, 2012

viper689 said:
1 - Battery remaining percentage. On the lockscreen, the battery percentage never matched my actual percentage remaining. It was always 10-15% off, or if the actual charge was below 20%, the lockscreen percentage would just read 0%. I had this same issue when I was running JBSourcery 1.0. Not a big deal to most, but it always bugs me

2 - LightFlow was not working for me on JBSourcery, nor were the built-in LED settings. LightFlow would work for a few hours, then stop working and I wouldn't be able to see the LED flash despite having an email, or text, or etc... The built in settings always had the LED flashing, whether the screen was on or off, had a notification or not. I need the LED to work so that when I'm at work, I know if it's urgent or not.

3 - Battery life. I know this one's a complaint for everyone on every ROM, but I've had better life on other ROMs. The idle drain on this was pretty ugly. Could be the kernel, I don't know, but something wasn't working.

As much as I want this ROM to work, there's a few bugs that, for lack of a better word, bug me. For the record, I was using Lean Kernel 4.4stable and with no kernel mods. I've also never dirty flashed any ROM, ever.

I hope the devs don't take this negatively as I really do like the ROM and am not trying to badmouth them or anything, just a list of things that for whatever reason weren't working for me. Hopefully only good will come from this.

the % on lock screen wont match unless you use stock battery %.

i use the led in the rom and it works good for me.
if you install lightflow there are probably conflicts. but if you jsut leave our stuff off and use light flow people say it works. but understood.

I have great battery life on the gsm and lte phones. but it varies for people.

Thanks for trying it. have fun with whatever you use thats the object of all this.

viper689 · Oct 12, 2012

teddyearp said:
Well, this _might_ be a bit OT for this thread, but I would like to address viper689 and everyone else's 'battery life' issues before I post again my feature request(s). I should almost post this in my own thread. . . .

For this phone, spend the extra $40 (or less if you can, I got it for ~ $35 on eBay) for the OEM spare battery and charger kit. I have been doing this for the last seven years with all my phones. I have always got phenomenal battery life by doing this (and on this phone I have got 48hrs on ICS roms and 36hrs on JB roms). Having a spare battery charging in a battery only charger, when the battery dies in your phone, switching it out with your fresh battery is immensely better for all your battery lives. Last point. THAT LITTLE USB PORT ON YOUR PHONE IS FOR HACKING ONLY!!! If you use it to charge your battery as well, your battery will not charge nearly as well and you WILL prematurely wear out the contacts. Just sayin' . . . and IMHO.

p.s. @viper: I'm on 2.3 and when it's all properly set up (though it does take some experimenting), I don't have any problems with the native LED and Lightflow notifications.

I've been wanting to do that but on most rom/kernel combos I don't have to. Even on Sourcery, it has some of the best on screen time that I've seen. It's the idle time that seems to drain it like while I'm sleeping. Believe me I've seen much worse battery time on other roms. That was the smallest of my issues here.

eagle1967 said:
the % on lock screen wont match unless you use stock battery %.

i use the led in the rom and it works good for me.
if you install lightflow there are probably conflicts. but if you jsut leave our stuff off and use light flow people say it works. but understood.

I have great battery life on the gsm and lte phones. but it varies for people.

Thanks for trying it. have fun with whatever you use thats the object of all this.

I do use the stock battery.

I had LightFlow disabled when trying the native, but it just wouldn't stop flashing.

Again, I've seen much much worse battery life on other roms, so don't worry about that. Like you said, it varies

eagle1967 · Oct 12, 2012

viper689 said:
I've been wanting to do that but on most rom/kernel combos I don't have to. Even on Sourcery, it has some of the best on screen time that I've seen. It's the idle time that seems to drain it like while I'm sleeping. Believe me I've seen much worse battery time on other roms. That was the smallest of my issues here.

I do use the stock battery.

I had LightFlow disabled when trying the native, but it just wouldn't stop flashing.

Again, I've seen much much worse battery life on other roms, so don't worry about that. Like you said, it varies

wierd i dont have the flashing on either phone.

maybe im backwards and need non stock battey in magic control for it to be close. but ive seen this before stated i havent seen it but seldom get my battery below 15%.

but it happens. on my droid i could not run cm. it rebooted, locked up got hot you name it seems some roms just dont like some phones.

as i said thanks for giving it a run. you got to go with what does what you need.

iowabowtech · Oct 12, 2012

Re: the lightflow issue...I had some issues in the early going with that app but have had no issues on the last several builds. Check your settings at the Sourcery Control Panel > LED Control and make sure selected app = default. Go ahead and use the on/off settings there. ( i use on 1 sec, off 2 secs). Leave the flash led while screen on setting at off.

If you ever mess with the "selected app" option and try to make it lightflow, it gets jacked up. Just some thoughts to try keeping you in the game. Sounds like the led thing is your biggest hangup viper.

Chizzele · Oct 12, 2012

I am a Jeeper

teddyearp · Oct 12, 2012

Chizzele said:
I am a Jeeper

[off topic] I thought that's why you had those avatars. . . . I'm not a rock crawler, but enjoy having my regular stock Jeep when I did a dirt road. Usually means I don't have to turn around, but can find out where it comes out.[/off topic]

Thanks eagle for the explanation.

ericks17 · Oct 12, 2012

I found a fix quite a while back for the built in led app and lightflow. If u prefer to use lightflow as do I. Change the led color to black on the built in one, and ur lightflow should work as it's supposed to, with no ongoing notification.

The_Chief · Oct 12, 2012

If you recall the symptoms: BT headset will not initiate music playback until it is first done on the phone. It will then pause/play for a time, but times out after awhile and the phone must be used to control music again. Not sure if it's a Jelly Bean issue or a JBSourcery issue.

I volunteered to wipe the phone, flash a different ROM, and attempt to duplicate the problem. If it still doesn't work, it's a JB issue... if it DOES work, then there is likely something in JBSourcery's coding that is stopping that initial play command.

eagle1967 said:
if you have time and want to that would be great. but its up to you but would help if it is good somewhere else id have something to look at .

thanks.

The_Chief said:
Okay, let me make a nandroid and work on this... back in a bit with results...

Once more the proud guinea pig!

View attachment 40965

RESULTS:

Okay Dear Developers, Here's what I did:

Wiped the phone (data, system, cache, dalvik)
Flashed XenonHD v15 (JR003R) & Gapps
Installed Titanium Backup and froze Apollo so ONLY Google Play was on the phone
Paired the BT headset & powered it down
Put the phone in standby (screen off)
Powered up the BT headset and let it connect
Hit Play

And the music started right up! :eek:

So, just to REALLY check, I powered down the headset AND rebooted the phone. I wanted this thing isolated. Phone came back up, I powered up and connected the BT headset and hit play.

And the music started right up!

Sadly, that sort of proves that it's not a Jelly Bean issue, but rather something in JBSourcery. Like I've said: don't kill yourselves staying up late, trying to track this thing down and fix it... it's just a minor nuisance having to turn on the phone and hit PLAY that first time (or PAUSE after a time period I haven't measured).

But I did want to let you know that it DOES work on other ROMs.

kinfolk248 · Oct 12, 2012

Will the 4.1.2 update be a full rom or just a patch? Don't wanna set things up twice if it's advantageous to wait for it...

The_Chief · Oct 12, 2012

Kinfolk, this is a full ROM with 4.1.2 elements...

Wipe wipe wipe!

Question for the developers: I downloaded 4.2 and both versions of Gapps... but only the regular Gapps is showing up in the Sourcery Tools folder. Where is the inverted Gapps going? I can't find that booger anywhere!

:thinking:

EDIT: NVM, found it in Sourcery Tools with Root Explorer. Not sure why Astro was being so squirrelly...

Anyway, backups are done, wiping & flashing now!

kinfolk248 · Oct 12, 2012

The_Chief said:
Kinfolk, this is a full ROM with 4.1.2 elements...

Wipe wipe wipe!

Question for the developers: I downloaded 4.2 and both versions of Gapps... but only the regular Gapps is showing up in the Sourcery Tools folder. Where is the inverted Gapps going? I can't find that booger anywhere!

EDIT: NVM, found it in Sourcery Tools with Root Explorer. Not sure why Astro was being so squirrelly...

Anyway, backups are done, wiping & flashing now!

No what I was asking was if the 4.1.2 rom would be a full rom or a patch? I know to wipe with full roms...

The_Chief · Oct 12, 2012

kinfolk248 said:
No what I was asking was if the 4.1.2 rom would be a full rom or a patch? I know to wipe with full roms...

Gotcha

bigbear6708 · Oct 12, 2012

I have to check the forum before my little top hat notification appears...i feel betrayed...o well, I'm over it...the to flash!

The_Chief · Oct 12, 2012

All set up again on 2.4, rocking GREAT!

Looking forward to the 4.1.2 full update!

GREAT WORK as always, developers!

kinfolk248 · Oct 12, 2012

The_Chief said:
All set up again on 2.4, rocking GREAT!

Looking forward to the 4.1.2 full update!

GREAT WORK as always, developers!

so 4.1.2 is a full rom update.........i may just wait then since 2.3 is stilling doing what i need it to...cant wait, i love magic tricks!!!

waviiboiied · Oct 12, 2012

changelog?

[Verizon] [rom]jbsourcery v5.4-lte[06/07/13] jb4.2.2 The Final Call

Accept no imitations!

Android Expert

Well-Known Member

Android Enthusiast

Android Enthusiast

Android Expert

Android Expert

Android Expert

Well-Known Member

Well-Known Member

Android Expert

Well-Known Member

root@android:/ #

Well-Known Member

Android Expert

Well-Known Member

Accept no imitations!

Android Enthusiast

Accept no imitations!

Android Enthusiast

Accept no imitations!

Android Enthusiast

Accept no imitations!

Android Enthusiast

Newbie

BEST TECH IN 2023

Smartphones

Best Android Phones

Upcoming

Best iPhones

Upcoming

Tablets

Best Tablets

Upcoming

Laptops

Best Laptops

Upcoming

Televisions

Best TVs

Upcoming

Game Consoles

Best Game Consoles

Upcoming

Wearables

Best Wearables

Upcoming

Smart Home

Smart Home Tech

Upcoming

Similar threads