• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

4.1.1 -> 4.1.2 = exactly 400% the brightness, WOW!!!

For the test, I used some professional light measuring equipment (my DSLR).

I captured an image at F/2.8, ISO 400, at 0 EV. Maxed out brightness on the Note 2, with Auto adjust screen tone off (important). I used a completely white picture shot at the same distance.

Before update:
Shutter speed 1/125s
After update:
Shutter speed 1/500s!

That is exactly 2 full stops. Or 4 times the original brightness.

Now, 400% sounds like a lot, like it would blind you. I don't want to create an over-expectation. It's seems adequately bright in a well lit room, where previously in that same room, the phone maybe seemed kinda dim.

When I got my original Galaxy Note II, that I was a little disappointed because people kept saying it is the brightest screen they ever had, and mine was far from that. But maybe those people saying that had something like this originally, but I just got it now. And it is beautiful.

Model: SHV-E250L (Korean Galaxy Note II, received OTA update today)
 
Yes, it is under Camera Settings on my AT&T Note II.

201212140854161resized.jpg
 
Upvote 0
Picture please....I would love a brighter screen. My S3 was returned due to dim screen. The note is a bit brighter than the S3. making it brighter yet is a total win. Especially with the large battery. I never run low on juice and have some to spare for a brighter screen!
 
Upvote 0
My note 2 has an odd screen brightness issue - normal brightness until it goes to stock browser, then quite obviously dimmer. (an aside, as I turn the browser off, it momentary brightens to normal). I simply switched to Dolphin, and haven't thought much about it until your post. Got any ideas?

I'm going to be you have power saving mode on. Turn it off. :) It also slows down your home screen. Makes it choppy. It also adds a layer of transparent blue to your stock browser.
 
Upvote 0
Just in case anyone wanted to see the hard data, here are the JPEG and CR2's. These pics are not glamour product shots. They are for the purposes of measurements off a highly calibrated light measuring device. You have to look at the EXIF information. The whole point is to take the same picture with the same level of brightness, by only exposing the sensor to 1/4 of the original open shutter time. The shutter speed indicates change in brightness because trying to evaluate a picture being brighter with people's eyes is always subjective.

Here's additional test information.
Camera: Canon 20D
Lens: Canon 60mm Macro F2.8
Light Metering: Center Weighed
ISO: 400
F-stop: F/2.8
0 EV

Phone settings:
100% Brightness
Auto Brightness off
Auto adjust screen tone off
Model: SHV-E250L

The Test:
Before update:
Shutter speed 1/125s - 1/160s
After update:
Shutter speed 1/500s - 1/640s

If you know a bit of photography, you will see that it was a good test with all the right settings. It was done in a room with a very dim controlled light source. It would be impossible to do a test like this with a point & shoot.


https://www.dropbox.com/s/520h0j18tqni5l4/brightnesschange.zip

Again, sounds like not everyone will get this boost, but some people have gotten it. Some people didn't. I just wanted some concrete numbers, hearing that I may notice this. I wanted more definite proof than say something like "yeah, it definitely kinda seems brighter."

So I did this right before and after the update. And I'm glad I did this to address the speculation, if any. But once again, I can only provide the facts for my device only. Yours may not react the same way.
 
  • Like
Reactions: mafac
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones