Well I am so glad my test mode went smooth its yet another problem I have run into and with the help here I now know more I love this place
Upvote
0
Quick question, I git my phone out of test mode but I couldn't get the DLL to register. Would metro be able to add all that info by any chance.
It wouldn't register, so I went to that forum and used Command Prompt, but I get this message. (Also, the first time I tried to install LGNPST_Components_Ver_5_0_12_0 it didn't work. I tried again, and it did). Would you help me pretty please?The module "C\LG Electronics\LGNPST\Models\VS910.dll" failed to load.
Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files.
The specified module could not be found.
You can also try removing clockworkmod recovery then un-rooting and then going to another Metro store to get it fixed.Ok so i got the phone out of test mode. Got the info back on and everything. Went to switch my service back to the phone but i have no bars. So no calls or text. Just data. An i know its out of test mode. So the guy at a metro outlet said take it to corporatestore and see if they can fix it. The corporate store says theres a update they were gonna do but they factoryreset my phone first an saw clockworkmod. From there they said they wont touch it....so i no longer have my esteem.
At the step where you register VS910:
It wouldn't register, so I went to that forum and used Command Prompt, but I get this message. (Also, the first time I tried to install LGNPST_Components_Ver_5_0_12_0 it didn't work. I tried again, and it did). Would you help me pretty please?
I guess I should have asked for help yesterday. here we go, so the issue I face is searching for service. 4g internet works but text and talk stopped working yesterday morning. So im at the point where you select file under lgpst - vs910.dll loads *i assume* and when i click on the Unknown com6 status stand by yellow bar the * phone setting button does not light up at all. So what do I do now?. I have the spc and all the #s but I cant get the lgpst phone setting button to light up. 2nd day without service man im really upset with metropcs.
Ok so i got the phone out of test mode. Got the info back on and everything. Went to switch my service back to the phone but i have no bars. So no calls or text. Just data. An i know its out of test mode. So the guy at a metro outlet said take it to corporatestore and see if they can fix it. The corporate store says theres a update they were gonna do but they factoryreset my phone first an saw clockworkmod. From there they said they wont touch it....so i no longer have my esteem.
TEST MODE FIX
--Plug your phone into your USB connection.
--Go to START then CONTROL PANEL then DEVICE MANAGER. Scroll down to "Ports(Com and LPT)" Expand it and your phone SHOULD be listed with a "COM7", "COM3" etc....
--Get YOUR "COM" number and remember it. This is what USB port you are plugged into. (If you don't see your phone, the drivers are NOT installed correctly.)
--Open and extract the Test Mode Zip on your desktop
--Open up the folder "Test Mode Fix" You should be looking at this.
--Open the drop down menu and find YOUR "COM" port.
--Click on CONNECT after you select YOUR "COM" and it SHOULD look like this.
--It takes 2-3 seconds and your phone will reboot if it is successful.
CONGRATULATIONS. You are now out of the dreaded TEST MODE.
Now for the fun stuff. Let's get your service back working.
SO I FOUND THIS THREAD IN THE FORUM AND THOUGHT IT WAS THE ANSWER TO ALL MY PRAYERS. I HAVE READ THIS THREAD ABOUT 5 MILLION TIMES THOROUGHLY AND READ ALL THE COMMENTS AND REPLIES...WELL MOST OF THEM. I DIDN'T WANT TO BE THE ONE TO ASK A RIDICULOUS QUESTION AND THE ANSWER IS RIGHT IN FRONT OF MY FACE SO I CONTINUED TO READ IT OVER AND OVER TO LEARN ALL POSSIBLE ERRORS THAT COULD ARISE AND SOLUTIONS TO THOSE ERRORS.
YES, I HAVE ALL THE SYMPTOMS OF TEST MODE {{CAN'T MAKE/RECEIVE CALLS/TEXTS, 4G ENABLED, NETWORK SAYS SEARCHING FOR SERVICE, NO PHONE #, MIN #, OR PRL VERSION#, NOT ROAMING, ROOTED LG ESTEEM, JUST FACTORY RESET ABOUT 2DAYS AGO -- HAD NO CHOICE -- I WAS STUCK IN RECOVERY MODE LOOP FOR A WHOLE DAY TIL I FOUND THE EXITRECOVERY.ZIP (FORGOT WHO DEVELOPED IT BUT THANK YOU), HIT "#" AND HIDDEN MENU COMES UP, USB SAYS FACTORY CABLE MODE, ETC..ETC.}} I GOT EVERYTHING DOWNLOADED, INSTALLED, UNZIPPED, & REGISTERED, FOLLOWED ALL THE STEPS AND WHEN I GET TO THE TEST MODE FIX IT SAYS THIS
"Connecting to COM3...
Reading Device Please Wait...
Connected To: LG Esteem (MS-910)
Device Fail To Unlock!
Reboot device and try again!
Device Software: Feb 24 201218:10:52Feb 24 201218:10:52MS910ZVD
Device Build: M7630A-ABBQMA
Device MEID: 99000060261780
Attempting to repair test mode!
Test mode disabled failed!
Restarting Device!
Please Try Again!"
DEVICE FAIL TO UNLOCK IS IN "RED" AND TEST MODE DISABLED FAILED IS IN "RED" AS WELL. MY PHONE NEVER REBOOTS AND I HAVE TRIED EVERY USB PORT ON MY CPU...........SO WHAT AM I DOING WRONG? HELP!
My wifes phone just got into test mode after it froze while in the gallery.I have tried to run the lg test mode repair exe but it crashes before it even loads.I got lgnpst already installed.I cant get it out of test mode,I downgraded from zvd to zvb using the lgnpst software and did a factory reset.The phone is still in test mode,might have to stop by a metropcs store.any help appreciated.
Also im Windows xp sp3
Ok i will try and disable all the software on my pc and try again
Thanks fuzzy for trying to help,I stopped EVERY background program or software that might be causing interference with it but still closes.The exe fc after opening..........thanks for your help.
We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.