• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Dorimanx kernel - Dummies Guide

ATTENTION ALL ALL!

Kernel 8.0 support ONLY new ROMS based on CM10.1 LAST nightly!
AND all JB SAMMY + ICS SAMMY ROMS!

DO NOT INSTALL on OLD CM/AOKP ROMS! get black screen, dont bother to write here!

OK I was just about to complain about my black screen :p , good thing I saw this and installed the 7.5 version.

What if I want the 8.0 version ? Do I have to install a new ROM first ?
 
Upvote 0
Dorimanx kernels v7.50 & v8.00 are now up! :)

"ATTENTION ALL ALL!

Kernel 8.0 support ONLY new ROMS based on CM10.1 LAST nightly!
AND all JB SAMMY + ICS SAMMY ROMS!

DO NOT INSTALL on OLD CM/AOKP ROMS! get black screen, dont bother to write here!

OK I was just about to complain about my black screen :p , good thing I saw this and installed the 7.5 version.

What if I want the 8.0 version ? Do I have to install a new ROM first ?

You have posted the answer to your own question... Yes! ;)
 
Upvote 0
Change Log:

*Updated with 3.0.67 main stream patch.
*Updated Linaro 13.02 Kernel builder.
*Fixed broken camera and video for JB SAMMY.
*Fixed Boot animation for JB SAMMY.
*Updated RAM code for 3.8.RC9
*Updated CORE code from 3.8.RC9
*WIFI toggle works now, but first time need 2 clicks..
*Init scripts updated/fixed.
*ROW I/O sched updated.
*Fixed Auto WIFI/DATA on/off on screen on/off tweak.
*Retuned Kernel configuration.
*Fixed MAX cpu at 1Ghz for some FAKE cpu chips that not detected as normal one.
now all that chips will be allowed to get max speed 1.4Ghz,
i dont think they can work higher than that, all the rest stay as was.
*Updated SuperSu to 1.20 by chainfire.
*Added fix for screen touch moving sensitivity, now will not reset, and stay as set in stweaks.
 
  • Like
Reactions: ironass and Twinn
Upvote 0
Had V8.1 running on Rootbox V3.8 and it was ok (but not exactly slick)....then I installed/updated the adblocker in stweaks and started getting that temporary black screen on boot, Play Service kept crashing and the UI was like wading through treacle (as ironass mentioned earlier).

I think there's just too much going on in this kernel, particularly with the already "busy" Rootbox, so I'm off to NEAT/Siyah for a bit of peace! ;)
 
Upvote 0
Thanks for jinxing it now, Syd. You're a real pal. :D

Although the reflash has messed up today's battery stats, V8.00 appears to be a good 'un in terms of deep sleeping and no unexpected partial wakelocks.

Lmao. I don't know how you guys test kernels but video and camera was broken in that version until this latest 8.1 version got released. :D:p

Now on version 8.1 everything seems improved. But the only issue is the wifi toggle which I have seen effect the kernel since version 7.48.

It is not working correctly and turn on and off via toggle and on each reboot it is turned off :banghead:

Now this is based of lidroid toggles most commonly found on aosp themed stock jb roms like AllianceROM LSD V7.01.


Its began to piss me off so I have sinced flashed back to philz LSD 4.64 fixed kernel. So far this has been my go to kernel for stability and if I just want things to work. ::):thumbup:

I hope Dorimanx can sort the kernel out to be stable and come out of beta stage but one thing gets fixed something else brakes in his kernels nowadays :cool:

Well at least the sound crackling is gone so theres that much at least and we can thank GM for that.
 
Upvote 0
Lmao. I don't know how you guys test kernels but video and camera was broken in that version until this latest 8.1 version got released. :D:p

Video and camera are very low on my list of priorities as I rarely use either. I test by using the device in my normal manner. Perhaps I'm naive, but I would expect something as obvious as "broken" camera functions to have been caught before release by the beta testers.
 
Upvote 0
Dorimanx kernels v8.2 & 9.0 are up! :)

"Kernel 8.2 JB CM/AOKP + JB SAMMY + ICS + cMIUI

Kernel 9.0 CM/AOKP ONLY! DO NOT INSTALL ON JB SAMMY or ICS. no support!

9.X branch exist to give back the lost RAM and video performance for MALI V2 video driver! to do it i must take the RAM from OLD video driver!

Change Log: kernel 9.0!

*Kernel has ALL that 8.2 has!
*Set audio driver back to CM standard. (no changes to dB boost!)
*Added 71MB video memory to boost GPU/Video decoder power! as in CM kernel.
*Released more 10MB to total RAM.
*No more ICS/JB SAMMY support in 9.x branch! do not spam the thread if you install all you see.

Change log global (8.2 + 9.0)

*Updated with 3.0.68 main stream patch.
*Voku ported many good patches/fixes for MEM, CORE, and more system stuff.
*Voku fixed/arranged cortex function to speed up things.
*Updated latest MEM changes from 3.8.Y
*I have cleaned old junk from cortex to speedup the script.
*Made small change to boot boost mod. to reduce overheat on boot.
*Added more +25mv to last CPU freqs 100/150Mhz to make them stable for all that using them.
*Alucard updated nightmare gov, still not 100% stable, for me hot boots when using it, for alucard no problem,
he use default and i am using performance, so more work needed. HYPER gov is default as was.
*Forgot to update SuperSu, so download from market, will be added in next release, sorry
"

Download, here.

Source, here.
 
  • Like
Reactions: Twinn
Upvote 0
Kernels 8.3 and 9.1 ONLINE.

8.3 version is for STOCK/JB/ICS

9.1 version is for JB CM/AOKP! no STOCK! no ICS! no support!


Kernels have same changes.

Change Log:

*Fixed errors in logs about MEM allocation.
*Extended CPU heat limits! and set to reduce CPU speed to 1Ghz! and not 800Mhz. on heat.
*Updated with SuperSu 1.25 by chainfire.
*Fixed CMA RAM code, used JB SAMMY kernel source.
*Voku ported good system updates.
*Improved DATA/WIFI on/off mod, should work as planed.
*Fixed WIFI toggle, works OK with latest ROOTBOX nightly.
*Tuned Sleep CPU GOV and Awake CPU gov, to drain less power when used or awake from deepsleep to do some jobs.
*Updated Latest INIT for all JB CM/AOKP 10.1 ROMS. (from CM-KERNEL!)
*Added support for CARBON CM-10.1 ROM.
*Corrected Volume boost mod descriptions. (works fine in 9.x!)

have fun! kernel is great
smile.gif


Source, Here
Download, Here
 
  • Like
Reactions: ironass
Upvote 0
Video and camera are very low on my list of priorities as I rarely use either. I test by using the device in my normal manner. Perhaps I'm naive, but I would expect something as obvious as "broken" camera functions to have been caught before release by the beta testers.

Lol. What beta testers. :D:p


I have offered and even told Dorimanx about having some beta testers for quality control and minimise issues on mass release but he can't be bothered and prefers to release buggy kernels to the masses. :rolleyes:

On his head it is. I think he just prefers everyone be beta testers.

On latest 8.3 there is issues with wifi toggling on and off. Also I myself have had 3 screen freezes on default settings and profile.

All reported on Dorimanx thread.

I have abandoned further testing and gone back to reliable philz fixed kernel range and currently using the latest philz LSE 4.87.6.
 
  • Like
Reactions: Twinn
Upvote 0
New Dorimanx 8.4 Online


9.2 = CM/AOKP ONLY KERNEL! NO ICS! NO JB STOCK!

8.4 = CM/AOKP/ICS/STOCK (less total free RAM to support all ROMS)


Change Log:

*Made Major updates for RAM code from 3.9.y kernel.
*Updated to max SLUB + friends code from 3.9.y kernel. (RAM cache and control)
*Updated many system code and lowmemkiller code,
now more free ram will be with normal use.
*Fixed WIFI toggle from ICS/JB STOCK! works as should.
for JB CM/AOKP works, but need to toggle 2~3 times after boot, then works as should, in time will be fixed.
*Tuned and cleaned cortex and XML.
*Voku posted nice CPU code updates.
*Added SEC ROM data auto mount when using PRI ROM! now you can move APK from rom to rom. check folder /data_sec after 40sec on boot!
it's takes time to load the SDCARD first, then the sec rom data. so WAIT.
*Pulled latest CM-KERNEL init updates to max support for CM based ROMS.
*Voku fixed the DATA/WIFI auto ON/OFF mod by cortex! now works!
*Voku updated debug script.
*BigBun updated STweaks XML descriptions.
*Improved SAMMY ROMS detection. now all SAMMY ROMS supported!
*Updated kernel CGROUP code from 3.9.Y kernel, used for system and tasks control and cpu control and many more.
*Updated Power Manager and task Freezer on suspend from 3.9.y kernel.
Now you should see better deepsleep state (less wakeups) and fast sleep.

all the updates from 3.9.y kernel, are HUGE code bug fix! see the GIT it's 4 pages long! so no room to write what changed... A LOT of good stuff! :)

have fun, report.

i have added AIO code that should give some apps I/O boost,
so if we will see some problems, i will remove it, it's EXPERIMENTAL!
and not used in Android kernels.[/QUOTE]




SIGNATURE
PHONE : SGSII
Sent via: Tapatalk
Main ROM: RootBOX 3.9
KERNEL : Dorimanx 9.1
(DEFAULT PROFILE AND SETTINGS )
MODEM : BVLP7
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb
LAUNCHER : Apex Pro
Root Manager : Superuser (koush)

THE CAVE = My Guides list to install NeatRom and other ROMS and kernels on LSJ and LS8 + tools to have a bug free rom and kernel + how to back up and RESTORE ROM OM FULLY = http://forum.xda-developers.com/showthread.php?p=35923600

1.Current list of kernels on LSJ and pros and cons

http://forum.xda-developers.com/showthread.php?p=36698607


2.Rom Nuke / Wipe scripts

http://forum.xda-developers.com/showthread.php?p=36742265

3. GS2KERNELWIPE script

http://forum.xda-developers.com/showthread.php?p=36742198

4.Fast Dormancy :

http://forum.xda-developers.com/showthread.php?p=36396636

5. How to install full wipe with rom nuke on LSJ

http://forum.xda-developers.com/showthread.php?p=36655790
 
Upvote 0
Ahem. Lets do this one more time.. :D:p

You know the drill;-)

Dorimanx 8.5 online


9.3 = CM/AOKP ONLY KERNEL! NO ICS! NO JB STOCK!

8.5 = CM/AOKP/ICS/STOCK (less total free RAM to support all ROMS)



kernels 8.4 + 9.2 DELETED! (freeze bug)

Change Log:

*Updated Sched CORE from 3.9.Y
*Updated more RAM code from 3.9.y
*Updated Power Manager Code from 3.9.Y
*Removed AIO mod, freeze the kernel.
*Voku made some BUG fixes






SIGNATURE
PHONE : SGSII
Sent via: Tapatalk
Main ROM: RootBOX 3.9
KERNEL : Dorimanx 9.1
(DEFAULT PROFILE AND SETTINGS )
MODEM : BVLP7
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb
LAUNCHER : Apex Pro
Root Manager : Superuser (koush)

THE CAVE = My Guides list to install NeatRom and other ROMS and kernels on LSJ and LS8 + tools to have a bug free rom and kernel + how to back up and RESTORE ROM OM FULLY = http://forum.xda-developers.com/showthread.php?p=35923600

1.Current list of kernels on LSJ and pros and cons

http://forum.xda-developers.com/showthread.php?p=36698607


2.Rom Nuke / Wipe scripts

http://forum.xda-developers.com/showthread.php?p=36742265

3. GS2KERNELWIPE script

http://forum.xda-developers.com/showthread.php?p=36742198

4.Fast Dormancy :

http://forum.xda-developers.com/showthread.php?p=36396636

5. How to install full wipe with rom nuke on LSJ

http://forum.xda-developers.com/showthread.php?p=36655790
 
Upvote 0
Cheers TBR!

Dodged a bullet on Dorimanx 8.4 it would seem. ;)

To be honest, none of the last 10 or so Dorimanx releases have been that good for me.

The last Dorimanx kernel that I found to be of any real use to me was way back to Dorimanx 4.73, here.

Since that release, I have been using Siyah 6.0 beta 4 and beta 5 as they have proved to be much better in terms of battery, performance, reliability and usability, for me.


EDIT Judging from some of the comments on xda developers site, I think I'll give 8.5 a miss too.
 
Upvote 0
New Dorimanx Kernels 8.6 + 9.4 ONLINE!

8.6 = JB/ICS CM/AOKP/STOCK! less total RAM to support all ROMS.
9.4 = JB CM/AOKP ONLY! more total RAM!


Change Log:

*Reduced the CPU steps back to 16 no more 50Mhz steps.
Some CPU models cant handle the half freqs and the 52Mhz freqs and SOD.
So i decided to revert to more HACKED STOCK :) (real STOCK is 5 steps)
*Updated RAM patches from 3.9.y kernel.
*Fixed BUGS in cortex and reduced CPU heat on call! now it's will stay in IDLE MIN freq(CPU tab in STweaks) during the CALL(screen off). then normalize.
*Added more detailed descriptions in STweaks XML, for UV,BLN,GPU
*Allowed to use max GPU voltage of 1400mV! only used for 520Mhz step 5!
for me now this freq is STABLE! i get 29.1FPS in bench test on heavy 3D, was no more than 24FPS with 400Mhz.
*Tuned other GPU steps voltage.
*Voku ported some system mods.
*Alucard cleaned nightmare GOV, still considered NOT 100% STABLE, need to run tests for SOD.
*Improved ROM boot start, now sdcards checked/fixed during boot, less delay on LOGO.
*Fixed EFS partition check/fix. now it's done on each boot, no need to go to recovery.
*Added auto mount of PRI ROM data when using SEC ROM. you can find the data of pri rom at /data_pri_rom, when you boot PRI ROM then sec rom data at /data_sec_rom :) (wait 40sec after boot before going there!)
*Improved cortex functions and logics.
*Set OFF by default the TCP tuning by cortex. for now...
*Fixed modules load for STOCK ROMS. tested on LSD and works.
*Voku fixed root install script and added more battery info to DEBUG log.
*I have removed all video hacks, and all got better now.


@ironass.

Hi buddy. :)

Yeah like you I have felt the same way about Dorimanx kernels for quite a while now on stock jb sammy :( and yes you was wise to skip 8.5.;)


I still give it a chance in hoping it can come back to being fully great. But my the best kernel for my needs ended up in the end being philz stock kernel the fixed versions.

Well this new version of Dorimanx has me intrigued lol:D:p;)

Will give it a shot. I must state that I have moved back to aokp roms last Saturday again and currently trying out Rootbox 3.9.1 based off jb 4.2.2

So far we have noticed with these ROMs using new Mali we have lost about 20% battery compared to jb Sammy.

But I'm not to bothered right now and loving the experience so far. So many new options. Even stubborn Hawker has joined me on this adventure. Lol :D:p;)

And contributing to Rb as he usually does on any ROM he uses. ;-)

I know he is stubborn but was wondering if you care to join us for a bit. Or is this asking to much :-D

I did listen to you guys when you convinced me very brilliantly to try out jb Sammy and so glad I did.

But I just want you to give new Aokp another chance well at least for a week. Im sure hawk or I can give u all the info you need should you feel adventurous :D;)


Speak soon.




SIGNATURE
PHONE : SGSII
Sent via: Tapatalk
Main ROM: RootBOX 3.9.1
KERNEL : stock rb cm kernel
(DEFAULT PROFILE AND SETTINGS )
MODEM : BVLP7
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb
LAUNCHER : Apex Pro
Root Manager : Superuser (koush)

THE CAVE = My Guides list to install NeatRom and other ROMS and kernels on LSJ and LS8 + tools to have a bug free rom and kernel + how to back up and RESTORE ROM OM FULLY = http://forum.xda-developers.com/showthread.php?p=35923600

1.Current list of kernels on LSJ and pros and cons

http://forum.xda-developers.com/showthread.php?p=36698607


2.Rom Nuke / Wipe scripts

http://forum.xda-developers.com/showthread.php?p=36742265

3. GS2KERNELWIPE script

http://forum.xda-developers.com/showthread.php?p=36742198

4.Fast Dormancy :

http://forum.xda-developers.com/showthread.php?p=36396636

5. How to install full wipe with rom nuke on LSJ

http://forum.xda-developers.com/showthread.php?p=36655790
 
  • Like
Reactions: Hawker and Twinn
Upvote 0
I know he is stubborn but was wondering if you care to join us for a bit. Or is this asking to much :-D

I did listen to you guys when you convinced me very brilliantly to try out jb Sammy and so glad I did.

But I just want you to give new Aokp another chance well at least for a week. Im sure hawk or I can give u all the info you need should you feel adventurous :D;)


Speak soon.

I think you'll find you're flogging a dead horse here mate.
Got about as much chance as finding an ashtray on a motorbike.
 
  • Like
Reactions: THE RED BLUR
Upvote 0
Dorimanx kernels, v8.7 & 9.5 are up! :)

8.7 = JB/ICS CM/AOKP/STOCK
9.5 = JB CM/AOKP ONLY



"Change logs!

*Voku updated 3.0.69 patch from main stream.
*Ported WIFI driver power manager changes from CM-KERNEL.
*Removed mov hysti touchscreen tuning, it's was broken and had no effect.
touch is OK, no side effects!
*Removed touch screen freq tuning! it's now 500Mhz on touch, but we still have the dynamic touch freq ON/OFF it's will allow HIGHER CPU freq on touch in case there is too much load by apps/services. if not then default 500Mhz is set as STOCK driver! from moment i have allowed to mod this, people reported scrolling SODS/FREEZE and that directly point on this mod.
*Voku corrected STweaks UV config, and set GPU response time to 1000Msec = 1sec! as CM-KERNEL default in driver, this may give us more stability, we can always reduce to get faster GPU response and burn more power, we get same FPS! question is how fast it's clime to last GPU freq! that's all.
*Ported RAM code fix from 3.9.y kernel, now we follow them fully for RAM and CORE and POWER code! that is the greatest thing ever exist for android device!
i am proud that we done it!
Problems with stability can be resolved for MANY! but not for all. some will never have the fun using this kernel.

have fun, and if you get sods all the time.
try CLEAN ROM + Kernel for a day, if no sods, then it's your BUG.

if still SODS, move to stock, i wish you luck.

no sods for me and very good low power(deepsleep state!) 92% i am more than happy.
"

Download, here

Source, here
 
Upvote 0
@ironass.

Hi buddy. :)

Will give it a shot. I must state that I have moved back to aokp roms last Saturday again and currently trying out Rootbox 3.9.1 based off jb 4.2.2

So far we have noticed with these ROMs using new Mali we have lost about 20% battery compared to jb Sammy.

But I'm not to bothered right now and loving the experience so far. So many new options. Even stubborn Hawker has joined me on this adventure. Lol :D:p;)

And contributing to Rb as he usually does on any ROM he uses. ;-)

I know he is stubborn but was wondering if you care to join us for a bit. Or is this asking to much :-D

I did listen to you guys when you convinced me very brilliantly to try out jb Sammy and so glad I did.

But I just want you to give new Aokp another chance well at least for a week. Im sure hawk or I can give u all the info you need should you feel adventurous :D;)

Got about as much chance as finding an ashtray on a motorbike.

Hawker's right, (I hate having to say that :ahhhhh:).

I'm a Sammy ROM boy these days... for lots of reasons. I've tried a fair few AOKP and AOSP ROM's in the past and whilst some have been quite good, others have been awful. Sometimes with features that I use, missing or cobbled together bits and pieces or non working aspects. Another consideration is that I wear reading glasses sometimes and I now know what the stock, coloured, icons look like without putting them on.

However, to quote the James Bond film title, "Never Say Never Again".

I think you'll find you're flogging a dead horse here mate.

Ummm. Dead horse. Feel like a burger for some strange reason.... :D:p;)

Lads, lads, lads... too soon!

After the tragic accident at the Cheltenham racecourse on Thursday.

On a separate note, I had a good day out at the Gold Cup yesterday and the burger vans all had a special offer on! ;)
 
  • Like
Reactions: THE RED BLUR
Upvote 0
Dorimanx 8.8 online


9.6 = CM/AOKP ONLY KERNEL! NO ICS! NO JB STOCK!

8.8 = CM/AOKP/ICS/STOCK (less total free RAM to support all ROMS)


Change Log:


*Voku ported good update from 3.9.y
*Voku fixed the dynamic touch freq mod.
*Voku ported good PM updates!
*I have found BUGS in Video drivers and fixed them. now more power will be saved. and more stability.
*I have added anti smart user boot block! that will prevent booting STOCK base ROMS(JB/ICS) with 9.xx Kernel! no more false bug reports or stupid questions.
*Voku tuned hotplug code to allow Sec CPU to be ON even on low freq to finish the task faster and go to idle. this can save battery.
*Voku ported update to ROW I/O Sched GOV.
*I made some revert to defaults for CPU idle and deep sleep code that was changed in previous kernel. all was OK before that.
*I have equalized CPU voltage for all sorts of CPU's, now all use same voltage. need to TEST by people that know they have non standard CPU.
*Removed some debug writes, no longer needed.
*I have reset the CPU cut on high cpu temp back to 800Mhz!
But allowed more heat before the cut, up to 69C (was 67c)
we found that when cpu cut to 1Ghz it's not reducing any heat! and CPU temp go up to 80 and more! (playing games) then some cpu chips SOD!
now OK no more then 70C
*Added some code ports from 3.9.Y to filesystem code.
*Set GPU response to 500Msec (half sec) to profiles default and above and fixed cortex values. video response much better.
*Big_Bum fixed the ROOT check button for Rootbox ROM users.
*I have separated TCP Tweaks from TCP RAM tweaks.
and set TCP tweaks back to ON, and TCP RAM tweaks to OFF by default (new tweak in STweaks.)

Have fun and Report.

Do not LOAD your profile, retune the new one if you do so. then save and restore in case of need. (old save is not good)

Know BUGS!:

*Some device will not boot this kernel without BOOTLOADER updated to JB version!

*WIFI toggle bug exist for some, and for some not. need to click 3 times,

***********************************

RED = Okay guys for anyone stupid enough to flash wrong version of kernel you will now be greeted with this message. LMAOOO :D:p

e3edu6uv.jpg


SIGNATURE
PHONE : SGSII
Sent via: Tapatalk
Main ROM: RootBOX nightlie 18/03/2013
KERNEL : Stock RB kernel
(DEFAULT PROFILE AND SETTINGS )
MODEM : LS8
BATTERY : Stock 1650mAh
EXTERNAL Sdcard : Samsung Class 10 32gb
LAUNCHER : Apex Pro
Root Manager : Superuser (koush)

THE CAVE = My Guides list to install NeatRom and other ROMS and kernels on LSJ and LS8 + tools to have a bug free rom and kernel + how to back up and RESTORE ROM OM FULLY = http://forum.xda-developers.com/showthread.php?p=35923600

1.Current list of kernels on LSJ and pros and cons

http://forum.xda-developers.com/showthread.php?p=36698607


2.Rom Nuke / Wipe scripts

http://forum.xda-developers.com/showthread.php?p=36742265

3. GS2KERNELWIPE script

http://forum.xda-developers.com/showthread.php?p=36742198

4.Fast Dormancy :

http://forum.xda-developers.com/showthread.php?p=36396636

5. How to install full wipe with rom nuke on LSJ

http://forum.xda-developers.com/showthread.php?p=36655790
 
  • Like
Reactions: Twinn and ironass
Upvote 0
Dorimanx kernels, 8.9 & 9.9 are up! :)

(there is no 9.7 or 9.8! bump the version as 8.x)

8.9 = JB/ICS CM/AOKP/STOCK
9.9 = JB CM/AOKP ONLY


"Change Log:

*Massive update to SMP code from 3.9.y kernel
*Massive update to workqueue code from 3.9.y kernel
*Tuned Lowmemkiller to be more aggressive and restored part of default code.
*Set more aggressive OOM on screen ON
*Removed some cortex script tuning, let kernel set the needed values.
*Updated CPU code from 3.9.y kernel.
*Allowed to use JB Stock sound driver in CM/AOKP (9.9ver) , this may fix the REC from LINE.
need to TEST.
*Removed networks code changes, i didnt see any effect.
*Tuned sdcard cache, now much faster read/write using memory buffers.

kernel is very powerful!
CPU power increased and now it's more IDLE when nothing to do.
RAM is free all the time!
Battery is GREAT!
"

Download, here

Source, here

UPDATE This kernel doesn't like my STweaks, or vice versa, "Unfortunately, STweaks has stopped". Back to good, old, trusty, Siyah!
 
Upvote 0
Oh well, with that, "Never say die", attitude that most rooters have on here, I've given Dorimanx 8.9 a second go.

My problem with STweaks was overcome by uninstalling the version that I was using with Siyah and then flashing 8.9 which loads its version of STweaks.

Am going to run it on Extreme Battery profile as is with only BLN enabled and the stock, JB, Power Saving on, although my initial reaction is that this kernel overwrites it.

Will see how it compares with Siyah.
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones