You must be running Windows XP/Vista/7
(Not sure about Windows 8)
Downloads
Download firmware from here: http://androidforums.com/connect-4g...8-official-connect-ms840-ms840v-firmware.html
Download the programs to convert and flash firmware: KDZ_FW_UPD_EN.zip
Drivers: LG MS840 Support: Find Manuals & Warranty Info | LG USA
How to get into emergency mode (Download Mode):
1. Phone must be off and unplugged
2. Hold Volume Up+Down and plug in USB cable.
To get out of e-mode, pull battery and unplug USB cable (do not do this while flashing firmware!)
Before you start flashing firmware, please make sure you charge your battery for at least 30 minutes/over 50%
These are the instructions to convert the cab to a KDZ and flashing it:
(Not sure about Windows 8)
Downloads
Download firmware from here: http://androidforums.com/connect-4g...8-official-connect-ms840-ms840v-firmware.html
Download the programs to convert and flash firmware: KDZ_FW_UPD_EN.zip
Drivers: LG MS840 Support: Find Manuals & Warranty Info | LG USA
How to get into emergency mode (Download Mode):
1. Phone must be off and unplugged
2. Hold Volume Up+Down and plug in USB cable.
To get out of e-mode, pull battery and unplug USB cable (do not do this while flashing firmware!)
Before you start flashing firmware, please make sure you charge your battery for at least 30 minutes/over 50%
These are the instructions to convert the cab to a KDZ and flashing it:
- Install phone drivers
- Install msxml.msi
- Disable antivirus software
- Open UpTestEX_mod2_marwin.exe
- Wait for the program to open
- Look for "Encrypt cab file to kdz file"
- Click the folder icon
- Choose the location of the cab you downloaded for the firmware
- Encrypt cab -> kdz Program will freeze up. DO NOT EXIT until program says Done!!! Otherwise it won't finish converting.
- Close program
- Open KDZ_FW_UPD.exe
- "Type" choose CDMA
- Choose in "Phonemode": Emergency
- Click the folder icon and choose the kdz file that UpTestEX_mod2_marwin.exe just made.
- Click Launch software update and enjoy!