• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root Rooting questions/TacoROOT issues

well i havent started yet i am going ot do capt. to day just that i was reading the steps and it said that iwell need the file and it well be used in this step for example it says this


unrevoked.

The rooting process with unrevoked will also not be covered in this thread, as it is well-documented.

Files you'll need

- RA-Recovery - USED IN STEP 3 (there are 3 different versions you can use - I recommend this one):

- Superuser 3.07 - USED IN STEP 4 (Attached to post #2 - md5: fc462fa0630379edbe10006b1d19d9b1)

- flash_image binary - USED IN STEP 9 (Attached to Post #2- md5: 97B64A4C8CB22E39F79062402D26A126)

- Misc/MTD Partition IMG file from Engineering build - USED IN STEP 9 (Attached to Post #2 - md5: 830C28C64A02023CB806306326070F7B)

- PC36IMG.zip | Mirror (FTP - Thanks Nick!) | Mirror (FileFactory) | Mirror (4shared) - USED IN STEP 10 - 3.70 Froyo ROM with 2.10 HBOOT - md5: 7056D42812AA5DF03FCC8DDDC2B64E85




so if i need thows files in thows steps then that takes me back to my first question

why would i be doing a new recovery with the ra recov when i already didi it with the dev meth is my phone getting wiped again with cap meth to were i have to re do the recov
 
Upvote 0
and here as i am reading the steps it is asking for this part on step 3



3) Install custom recovery (previously downloaded from OP) using fastboot
Code:
fastboot flash recovery [name of recovery file]
attachment.php


or Android Flasher

so it is asking for a custom reco or a androed flasher
 
Upvote 0
on on step 3 how do i get to that command window that is showing cuz it dose nto tell you in the step were or how to get to that window

it asuming that it is already there an running like in other steps or guides it tell you to go here and open the comm window

and sents i am abeginner would it be easer to use the android flasher cuz it looks fromt eh pics on teh guide easy to use

ans orry for all the questions



sorry for all the questions
 
Upvote 0
and now it says as ia m reading that in this step

4) Boot into recovery, flash latest superuser (3.07, with 3.0.3.2 binary - previously downloaded from OP)
NOTE: If you get an error when flashing this zip file (i.e. signature verification failed), there is an option to "Toggle Signature Verification" under the "Flash zip menu". Do that, and then try flashing again.


then a pic shows up on this step and says this in teh pic



attachment.php



so do i confirm yes to this ?

and step 5

it says Reboot device, enable USB Debugging (Settings -> Applications -> Development), and disable "Fast Boot".

so is it going ot ask me that after it is done or do i asum after i confirm to the step for i pull the bat and restart it or what thsis is very verg

 
Upvote 0
k i got the #

so now in step 9 the pic shows the commands to enter as this


input the following commands, as seen in the picture below:
Code:
cat /sdcard/flash_image > /data/flash_image [ENTER]chmod 755 /data/flash_image [ENTER]/data/flash_image misc /sdcard/mtd-eng.img [ENTER


do i need to enter it like that above or do i need to do it like this



cat /sdcard/flash_image > /data/flash_image

and then hit enter on each line
 
Upvote 0
k i have update complete and now restarting an now finihYou will need to use unrevoked3, which will install a custom recovery and unlock your NAND with unrevoked forever (Wiki here, guide here - starting under "SECTION 2: ROOTING PROCEDURE"). TIP: Make sure your device is disconnected when first running the unrevoked3 "reflash_package.exe". When it opens, choose "File", then "Custom Recovery ...". Navigate to the location of your preferred RA recovery.img file, and select. Then, when it's done, you'll be NAND unlocked, and have your preferred custom recovery!

attachment.php


sed so i here at this part

so now i need to do the unrevoked part right
 
Upvote 0
ok i think i need to be were i need ot be i have one more question when i reflash during the unrevoked3 meth it say i well be instailing clockwork mod is there a way i can put the nandroed instead of that clockwork or do i need ot put the clockwork on there first . and then reflash the nandrod ru file to get the nandroed recov
 
Upvote 0
I have heard here and there the unrevoked does not work....don't quote me on that. The evo's I have rooted, I have gone the revolutionary route....meaning that in step 10, I used the alternate PC36IMG...not Froyo.
Captain_Throwback said:
If you'd prefer to root/NAND unlock using Revolutionary, you can substitute the Froyo ROM file (in Step 10) with a Gingerbread ROM file (any version up to 4.54). The latest version unlockable with Revolutionary can be found here.
Quote taken from here:

​[GUIDE] How to achieve S-OFF after unlocking 2.18 HBOOT with HTCDev.com - No More Watermark! :) - theMikMik

I think Ocn may know if Unrevoked is working or not.
Or, you can install the PC36IMG file and then s-off with revolutionary. :)
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones