Ok long story short I wiped my stock ROM from my phone.. Samung Galaxy S Victory 4G LTE Virgin Mobile I have been trying for half a day to get answers & step-by-step instructions on how to fix my phone without success.. I have attempted to fix the issue myself again with no success. These are the steps I have taken thus far
Downloaded the following TAR
COMBINATION_L300VPALH1_L300SPRALH1_934170_REV00_us er_low_ship.tar.md5
Started ODIN 3.4
Connected Device
Started the MD5 file following results
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_L300VPALH1_L300SPRALH1_934170_REV00_us er_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> userdata.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says
ODIN MODE
Product Name: SPH-L300
Custom Binary: Download Yes (1)
Current Binary: Samsung Offical
System Status: Custom
Qualcom Secureboot Enable
ODIN: Invalid ext4 image
if anyone could please help, I just want my phone back so I can call my family for Christmas.
Currently when power on phone this message appears:
**I think i have an original copy someone created as a backup, but it contains two sets of files boot.emmc.win and boot.emmc.win.md5 however when i attempt to load the MD5 file in ODIN it comes back saying the hash is invalid**
How do I take the boot.emmc.win, recovery.emmc.win, system.ext4.win and make them usable in ODIN??
Thank You
McTavish
Downloaded the following TAR
COMBINATION_L300VPALH1_L300SPRALH1_934170_REV00_us er_low_ship.tar.md5
Started ODIN 3.4
Connected Device
Started the MD5 file following results
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_L300VPALH1_L300SPRALH1_934170_REV00_us er_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> userdata.img.ext4
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says
ODIN MODE
Product Name: SPH-L300
Custom Binary: Download Yes (1)
Current Binary: Samsung Offical
System Status: Custom
Qualcom Secureboot Enable
ODIN: Invalid ext4 image
if anyone could please help, I just want my phone back so I can call my family for Christmas.
Currently when power on phone this message appears:
**I think i have an original copy someone created as a backup, but it contains two sets of files boot.emmc.win and boot.emmc.win.md5 however when i attempt to load the MD5 file in ODIN it comes back saying the hash is invalid**
How do I take the boot.emmc.win, recovery.emmc.win, system.ext4.win and make them usable in ODIN??
Thank You
McTavish