Follow this take apart repair guide to repair your damaged Sony Ericsson Xperia Play CDMA or 4G. This will clearly walk you through the steps required to securely and quickly repair a damaged screen and other internal parts.
This guide will help you to install the following Sony Ericsson Xperia Play CDMA & 4G part(s):
Tools:
Sony Ericsson Xperia Play take apart guide:
Figure 1
Figure 2
This guide will help you to install the following Sony Ericsson Xperia Play CDMA & 4G part(s):
- Sony Ericsson Xperia Play Touch Screen Digitizer
- Sony Ericsson Xperia Play LCD Screen
Tools:
- Safe Open Pry Tool
- Torx T5 Screwdriver
- Torx T6 Screwdriver
- Adhesive Strips (For Touch Screen Repairs)
- Heat Gun/Hair Dryer
Sony Ericsson Xperia Play take apart guide:
- Remove first the back battery cover and the battery.
- Next remove the thirteen (13) T5 Torx Screwdriver as shown in Figure 1.
Figure 1
- Release the clips holding the back housing onto the device using safe pry tool.
- The motherboard will be exposed once the housing has been removed.
- Two (2) Small Phillips Screws holding the motherboard in place must be removed.
- Next, gently pry the headphone jack which is head with a small clip and adhesive using safe pry tool. Be careful on the connected flex cable.
Figure 2
- The motherboard must be left to its side after sliding outward the Xperia Play. Be cautious as it is still connected by 2 flex cables.
- The main
