• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root CM12.1 Unofficial Beta

furryoflife and eduardog, heres a twrp kitkat modified to not load the persist-lg partition. try it and lemme know what happens.

twrpfurry.img is inside zip since i cant upload just the img, unpack it then fastboot boot twrpfurry.img or fastboot flash recovery twrpfurry.img, your choice. i would recommend booting it first to see what happens
 

Attachments

  • twrpfurry.zip
    12.9 MB · Views: 74
Upvote 0
uploadfromtaptalk1425530206256.png

Here's what it should look like when the partition is full
 
  • Like
Reactions: Bad_MOFO_33
Upvote 0
So I'm still experiening the no-ring issue after reverting to my TWRP ZV5 backup. I cannot figure it out. I made sure Quiet Mode wasn't on, I have nothing set to reject calls. I flashed this ROM again just to test if I could receive calls on it, and found that I could. It would pop-up a notification when receiving a call (on silent) and would show up in the call log. Reverted back to the TWRP backup and no such notification when receiving the call. Nothing shows up in the call log, but to the caller it is ringing and will go to voice mail. If they leave a voice mail, a notification will push to my phone. I can make calls, send/receive texts, use 4G, etc.. ##UPDATE# also doesn't fix it. I'm at a loss.

On a side note, while I was playing around with this ROM to test call notifications I noticed that I was only getting 1x connectivity. Last time I was running it I was getting consistent 3G and it was in the same location both times (my living room). Still have yet to get 4G on it.
 
Upvote 0
furryoflife and eduardog, heres a twrp kitkat modified to not load the persist-lg partition. try it and lemme know what happens.

twrpfurry.img is inside zip since i cant upload just the img, unpack it then fastboot boot twrpfurry.img or fastboot flash recovery twrpfurry.img, your choice. i would recommend booting it first to see what happens
I do not get the error for not being able to mount lg_persist.
 
Upvote 0
So how is everyone getting calling and SMS to work? I can't figure it out for the life of me, and I'm getting a No SIM error on my lockscreen. Until I can actually use this as a phone, I've been forced to revert back to stock (I'm still on ZV3 by the way :D )

Anyways, great work on this ROM, it's much smoother than stock! It's nice to have TWRP available too. No one over at XDA has done much development for this little gem, unfortunetly :( Keep up the good work! :)
 
Upvote 0
So how is everyone getting calling and SMS to work? I can't figure it out for the life of me, and I'm getting a No SIM error on my lockscreen. Until I can actually use this as a phone, I've been forced to revert back to stock (I'm still on ZV3 by the way :D )

Anyways, great work on this ROM, it's much smoother than stock! It's nice to have TWRP available too. No one over at XDA has done much development for this little gem, unfortunetly :( Keep up the good work! :)

The only thing I did differently than some was to flash the Zv5 radio after flashing the ROM and Gapps. Not sure if that made a difference or not but SMS worked just fine, even on stock messaging app. I also had the No SIM error but it didn't seem to affect anything.
 
Upvote 0
To the Devs and anyone else having trouble with the lockscreen staying locked, I may be way behind on this but I just discovered that in Settings-Display there is a setting called Lift to wake, if you turn this off the lock screen stays locked, not sure how to fix this feature but for now if you just turn it off it does the job! :)
Was posted on page 2, but thanks anyway
 
  • Like
Reactions: jakemarshall229
Upvote 0
Hello, I've been trying to build CM12 using Bad Mofo's device tree, its my first time developing for an android phone. I have my device tree all set up and I can successfully build Cyanogenmod. The problem comes after flashing the zip from the out directory, and I get left with an "Secure Booting Error! Cause: boot certification error.", and I just wanted to know if any of you could help me with this.
 
  • Like
Reactions: adamhos1234
Upvote 0
Hello, I've been trying to build CM12 using Bad Mofo's device tree, its my first time developing for an android phone. I have my device tree all set up and I can successfully build Cyanogenmod. The problem comes after flashing the zip from the out directory, and I get left with an "Secure Booting Error! Cause: boot certification error.", and I just wanted to know if any of you could help me with this.
You need to open the rom zip with archive manager and drag the boot.img from the out folder into it(Archive manager window) overwriting the boot img that was previously there. Hope this helps
 
  • Like
Reactions: tricky_ricky
Upvote 0
Need some help, guys. I flashed this along with the zv5 radio and gapps. Followed instructions on the install, and everything went smoothly. After setting up the device, despite the dialer code fix attempts, my phone network keeps dropping out intermittently. Secondly, I can no longer restore my backup of the ZV5 stock rooted rom in TWRP 2.8.1.0. If I attempt to restore all partitions, it fails in the Data phase. If I only try to restore the system, it completed and hands on the LG logo on startup. Lastly, I cannot access phone's micro sd card via MTP to transfer over any files I want to flash. it will mount as a camera, but that's it. Where do I go from here? [emoji19]

I'm no stranger to flashing ROMs, but need some direction on maintaining network stability in the CM12 rom or allow me to revert to my backup until the remaining setbacks are resolved. Any ideas?

Thanks for listening...
 
Upvote 0
Need some help, guys. I flashed this along with the zv5 radio and gapps. Followed instructions on the install, and everything went smoothly. After setting up the device, despite the dialer code fix attempts, my phone network keeps dropping out intermittently. Secondly, I can no longer restore my backup of the ZV5 stock rooted rom in TWRP 2.8.1.0. If I attempt to restore all partitions, it fails in the Data phase. If I only try to restore the system, it completed and hands on the LG logo on startup. Lastly, I cannot access phone's micro sd card via MTP to transfer over any files I want to flash. it will mount as a camera, but that's it. Where do I go from here?
emoji19.png


I'm no stranger to flashing ROMs, but need some direction on maintaining network stability in the CM12 rom or allow me to revert to my backup until the remaining setbacks are resolved. Any ideas?

Thanks for listening...
I think the intermittent data issue is pretty common. I experienced it routinely when running it. Sometimes I would get 3G, sometimes 1x but never 4G. It would drop out pretty regularly. As for the backup restore, I have no idea. Maybe one of our fabulous developers can help you with that one. At this point I would be really happy if the data issues are resolved and the vibration is fixed at some point. I can live without stock camera if there's a workaround, but unreliable data is a killer. I also haven't used the BT on this ROM and would need that to be reliable also. Overall, I'm amazed at all the developers have accomplished with this device, it's really incredible.
 
  • Like
Reactions: geekhandstrong
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones