I used 1 1/2" pvc lattice from Lowes it was like $6 for 8 feet just screwed them together. drilled a 3/8" hole for plug then trimmed it to fit. I spray painted it black, you can use any color. I could make some drawing but will have to wait til the weekend. Thanks for the positive comments!
If you click the clock and it opens up the clock app, those two buttons under it give you a clock. If you turn it on it's side then it goes landscape... I'm confused.
Nice work although I still don't understand why HTC would put a power port on the side of a phone with a UI that doesn't rotate from portrait to landscape.
If you click the clock and it opens up the clock app, those two buttons under it give you a clock. If you turn it on it's side then it goes landscape... I'm confused.
It looks great. I'm still not really sure what you need a dock for though??? How is this better than just plugging the phone in and laying it on the table??
Not to sound like a jerk or anything, just trying to see if there is something I'm missing with this. Thanks.
It looks great. I'm still not really sure what you need a dock for though??? How is this better than just plugging the phone in and laying it on the table??
Not to sound like a jerk or anything, just trying to see if there is something I'm missing with this. Thanks.
Besides the fact that it looks much better when the phone is "displayed" on a dock,....many of us use the phone as our alarm clocks and its a lot easier to see the time when its sitting at an angle on the dock.
Besides the fact that it looks much better when the phone is "displayed" on a dock,....many of us use the phone as our alarm clocks and its a lot easier to see the time when its sitting at an angle on the dock.
I use my phone as an alarm clock and have it plugged in and laying on the nightstand next to my bed. The alarm goes off at the same time every morning and all I do is roll over, swipe down and the alarm is off. I don't really need to see what time it is since it's always 7am everyday when the alarm goes off.
I guess it might look "nice" on it's side plugged in on a little stand. I was just trying to see if there was something else I was missing with it as far as functionality or something was concerned. Thanks.
HA! Yeah I didn't think there was anything else. The dock looks really nice and the OP did a nice job on it. I wasn't trying to take anything away from the thread just trying to understand what, if any, are the benefits of having a dock. I guess there really aren't unless you really want to be able to see the phone sitting on it's side as opposed to laying flat on a table.
You could use some epoxy putty to keep the cord in place and for a portrait mount. Just go to Bed, Bath & Beyond and pick up some mighty putty for $4.00 for three tubes they are on sale. Let it harden in an hour sand sand it then paint it. It's what I use for all of my docks and it works perfectly. You can encase the whole cable if you want to "freeze it" in position so you can just slide the DInc in to it or just use a blob to hold the cable in place leaving a half inch or so of the cable free so you can plug it in with your hand. The second method is faster. The first is more custom.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.