• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

[ROM] Z981 MetroPCS B21 Stock Rom

I got working however bluetooth doesnt work for whatever reason. I'm going to restore once again and see if it was just a glitch. did you have bluetooth working when you created the backup?
Yes bluetooth was working. Can you post the steps you took that got it to work. So someone else can follow exactly what you did.
When you restored your phone it's like getting a new phone. You probably need to clear devices from your cars bluetooth or your speakers. Here's a guide. Step 1: Clear devices from your phone's memory
Open your phone's Settings app .Tap Connected devices . Previously connected devices. If you don't see 'Previously connected devices,' tap Bluetooth.If you see devices you're not currently using, next to each device name, tap Settings  Forget device.If you paired your phone and car before, next to your car's name, tap Settings  Forget device.
Step 2: Clear devices from your car's memory
To clear devices paired with your car, follow your car's manual.
Clear any devices you're not currently using.If you paired your phone and car before, clear your phone.
Step 3: Refresh the device list, then pair
To learn whether to pair from your phone or car, check your car’s manual.
<b>Pair from your phone</b>
Check that your car is discoverable and ready to pair.Open your phone's Settings app&#160;.Tap&#160;Connected devices. If you see&#160;'Bluetooth,' tap it.Tap&#160;Pair new device&#160;your car's name.
<b>Pair from your car</b>
Open your phone's Settings app&#160;.Tap&#160;Connected devices.&#160;If you see 'Bluetooth,' tap it.Keep this screen open.On your car's list of devices, pick your phone's name.&#160;If asked, check&#160;that the PINs shown on your&#160;phone and car's screens match.Tap&#160;Allow access to your contacts and call history.Tap&#160;Pair,&#160;Accept, or&#160;Confirm.
 
Last edited:
Upvote 0
Screenshot_20190820-225205[1].png Heres what it looks like bluetooth is greyed out and goes back to off.
 
Upvote 0
Same results Bluetooth greyed out after restore
Try step 4 to 8 after you restored it again.
Since I did not have ths stock files this is what I did first I download the two files to my sd card
https://androidfilehost.com/?fid=11410963190603875671
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-6.0.zip

Then I rebooted into twrp

1) Wipe Dalvik/Cache,Sistem,data,internal storage, except MicroSd where your files are.
2) did not have the stock zip so I flash with the non rooted stock zip file that I downloaded into the micro sdcard.
. press back click install
then I click back again and click install no-verity-opt-encrypt-6.0.zip
4)System Reboot (it will stay in the logo of ZTE now return to restart in recovery)
5) Wipe normal, not advanced.
7) Reboot System
8) it stays on the zte logo for like 5 minutes then it starts.

I save those files to my mega account in case I need them again.

https://mega.nz/#!JgpWFapQ!zKPhF8kDmBSlH45XutYPLycXeZt7TVo9BPpPR5FCwRs
https://mega.nz/#!R8pmwaTD!RYZRohMAPWiIIbq9Bf42Bjg0p1hDIwVmjSTVcwYokdk
 
Upvote 0
Did step 4 through 8 Bluetooth still wont turn on I think my Bluetooth module may be borked on stock roms because I flashed
[ROM][UNOFFICIAL] Lineage OS 14.1 for ZTE ZMAX PRO
Back over and Bluetooth works.

I also tried nettaylors stock rom version 6.0.1 for the zte zmax pro 981

https://forum.xda-developers.com/showpost.php?p=77717333&postcount=50
same results broken Bluetooth on stock
ROM
 
Upvote 0
Trying to help you I accidently clicked wipe. arrgg but here is what i'm doing step by step on how i'm getting my phone back to work.

. I'll explain it more clear

Since I did not have the stock files this is what I did first.

I download the two files to my sd card then I rebooted into twrp

1) click the Wipe tab. select advanced Wipe .check Wipe Dalvik/Art Cache,Sistem,Data,Internal Storage.Cache, EXCEPT MicroSd and USB-OTG where your files are. slide to wipe then click the back button do not reboot system. then back again with the arrow untill you see the install tab
2)click the install tab select the storage micro sdcard and click ok.
3 select ZTE-ZMAX-PRO-B21-STOCK_NON-ROOTED.ZIP.
4.then swipe to confirm flash.
5.ill say this may take 5 minutes or more.
6.ill say no os installed! Are you sure you wish to reboot? then swipe to reboot. if the it loads the welcome screen just turn off first. then turn it back on by holding the volume up button and power button at the same time.
7.in twrp click install tab. click select storage select micro sd then click ok.

8.then click on the no-verity-opt-encrypt-6.0.zip then swipe to confirm flash. when its done ill ask if you would like to install the official twrp app. swipe to install twrp app and it will reboot.
9.if it loads in the welcome screen turn it off then turn it back on by holding the volume up button and power button at the same time to go back into twrp.
10) click the wipe tab. then slide Wipe to factory reset, not advanced wipe.
11) then click Reboot System
12) it stays on the zte logo for like 5 minutes then it starts.

I save those files to my mega account in case I need them again.

https://mega.nz/#!JgpWFapQ!zKPhF8kDmBSlH45XutYPLycXeZt7TVo9BPpPR5FCwRs
https://mega.nz/#!R8pmwaTD!RYZRohMAPWiIIbq9Bf42Bjg0p1hDIwVmjSTVcwYokdk
 
Last edited:
Upvote 0
Trying to help you I accidently clicked wipe. arrgg but here is what i'm doing step by step on how i'm getting my phone back to work.

. I'll explain it more clear

Since I did not have the stock files this is what I did first.

I download the two files to my sd card then I rebooted into twrp

1) click the Wipe tab. select advanced Wipe .check Wipe Dalvik/Art Cache,Sistem,Data,Internal Storage.Cache, EXCEPT MicroSd and USB-OTG where your files are. slide to wipe then click the back button do not reboot system. then back again with the arrow untill you see the install tab
2)click the install tab select the storage micro sdcard and click ok.
3 select ZTE-ZMAX-PRO-B21-STOCK_NON-ROOTED.ZIP.
4.then swipe to confirm flash.
5.ill say this may take 5 minutes or more.
6.ill say no os installed! Are you sure you wish to reboot? then swipe to reboot. if the it loads the welcome screen just turn off first. then turn it back on by holding the volume up button and power button at the same time.
7.in twrp click install tab. click select storage select micro sd then click ok.

8.then click on the no-verity-opt-encrypt-6.0.zip then swipe to confirm flash. when its done ill ask if you would like to install the official twrp app. swipe to install twrp app and it will reboot.
9.if it loads in the welcome screen turn it off then turn it back on by holding the volume up button and power button at the same time to go back into twrp.
10) click the wipe tab. then slide Wipe to factory reset, not advanced wipe.
11) then click Reboot System
12) it stays on the zte logo for like 5 minutes then it starts.

I save those files to my mega account in case I need them again.

https://mega.nz/#!JgpWFapQ!zKPhF8kDmBSlH45XutYPLycXeZt7TVo9BPpPR5FCwRs
https://mega.nz/#!R8pmwaTD!RYZRohMAPWiIIbq9Bf42Bjg0p1hDIwVmjSTVcwYokdk

Thats exactly the steps I followed but bluetooth is still busted on the rom for me. I appreciate the help.
 
Upvote 0
Here is the link for you to Restore your phone. But you need to extract it first then place it on the micro sd card,

1.wipe cache
2.install no-verity-opt-encrypt-6.0.zip then reboot
3. back and click restore stays in the boot screen
4 then load into twrp an install no-verity-opt-encrypt-6.0.zip
5 then click back and install ZTE-ZMAX-PRO-B21-STOCK_NON-ROOTED.ZIP
select there wipe dvk cache then reboot
6 swipe to install twrp app.
3. once its restored Bluetooth might not work. check settings to see if it works.





How to make Bluetooth work. if it not working after restore.

turn off your phone. then go back to TWRP holding volume up and power.
4 then load into twrp an install no-verity-opt-encrypt-6.0.zip
5 then click back and install ZTE-ZMAX-PRO-B21-STOCK_NON-ROOTED.ZIP
select there wipe dvk cache then reboot
6 swipe to install twrp app.

https://mega.nz/#!hhZU1YyL!sHMR60V8cvjSwwUYu6f1Axprujg6nz1v3xw72smOOvg
 
Last edited:
Upvote 0
Hello Everyone. Recently I By Mistake Flashed A Zip In My ZTE ZMAX PRO. After That Every Time I Flash Stock Rom Or Any Rom. The Phone Doesn't Turn On. It Stuck On Boot. In Twrp It Show Can't Mount Firmware (Invalid Argument). Now I Need The Firmware Folder Of Zte Zmax Pro. In The Phone Go To Root Folder & There Are A Folder Name Firmware. I Need That Folder Otherwise My Phone Will Not Turn On. I Asked Many Other People But They Aren't Helping. So Pls Pls Help Me And Give Me The Firmware Folder Of Zte Zmax Pro.
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones