1. Are you ready for the Galaxy S20? Here is everything we know so far!

4 days and still can't change firmware

Discussion in 'Android Devices' started by bouoy, Dec 24, 2011.

  1. bouoy

    bouoy Lurker
    Thread Starter

    I spent 4 days folling every tut and youtube video trying to change this tab's firm ware. I've tried tims, uberoid,ekion. It just keeps loading the orginal os and skips the sd card. Here are my specs. Can you please help.

    CPU
    ARM11 1G Hz
    SDRAM
    512MB DDR2
    Operating system
    Android OS 2.3
    Interface
    TF Card Slot *1pcs3.5mm EarphoneHDMI 1.3USB2.0 *2PCSRJ45
    Memory Capacity
    Flash:4GB(8G/16G Optional)T-Flash: Support up to 32GB[FONT=宋体]([/FONT]Optional, buyer can order the TF card from us[FONT=宋体])[/FONT]
    Android model 10
    Version 2.3
    Kernal vesrion 2.6.32.9
    Build FRF85B


    Thank you in advance This was going to be a xmas gift .
     



    1. Download the Forums for Android™ app!


      Download

       
  2. Rabid1

    Rabid1 Android Enthusiast

    None of those ROMs are for your pad. There are many versions of the Flytouch 3 and only a couple have custom ROMs available DISCO10 or P041 are the only two I know that have them.

    Your best bet is to try to root it using Gingerbreak, or z4root. Then ate least you can do some customization of your own, and tweak it a little.
     
  3. bouoy

    bouoy Lurker
    Thread Starter

    I'm sorry can you post a link to them please on how and where to get the stuff. I installed a factory firmware someone told me it would work and not it just sits on a splash screen after any ideas? thanks can you also tell me how you know what type it was from what information?
     
  4. Rabid1

    Rabid1 Android Enthusiast

    You can Google those names, they are just root applications you install and run, but first you need to get a copy of a good working factory firmware. You need to contact your reseller for a link. Do not tell them you flashed any firmware, just tell them it is stuck on that screen and using the reset pin doesn't work.

    When it comes to stock roms, never flash one that "somebody" says works, unless more than one person verifies it or they can prove it, particularly when you have a tablet that is not one of the more common tablets.
     
    bouoy likes this.
  5. bouoy

    bouoy Lurker
    Thread Starter

    I have 3 other versions of this tab sittin in the box can i copy the firmware off of them?
     
  6. Rabid1

    Rabid1 Android Enthusiast


    No you need to get the firmware from the reseller. Who did you buy this from?
     
    bouoy likes this.
  7. Rabid1

    Rabid1 Android Enthusiast

    Please if you don't know what you are doing don't offer advice. These tablets have completely different specs. If by any chance the firmware held he would have a nice bricked tablet, so no it is not worth a try.
     
  8. dart16

    dart16 Android Enthusiast

    The most important bit is the model number....model 10 in your case.

    Also we can see that it has an ARM11 cpu, most probably a Infotm X220 which makes it a Flytouch 3 and not a Flytouch 5 or 6 which have ARM A8 Cortex cpu's.
    (which means Rabid1 is right..the iBex Flytouch 5 firmware won't work in your tablet)

    Contact the seller for a link to the original firmware.

    Z4Root is HERE
     
    bouoy likes this.
  9. bouoy

    bouoy Lurker
    Thread Starter

    THanks Dart I was able to find a website that had factory firmware I waiting to dl it to make sure it's correct from what I can tell it covers all the tabs made over seas. place called Pandawill forum
     
Loading...

Share This Page

Loading...