1. Are you ready for the Galaxy S20? Here is everything we know so far!

AAAAARRRGGGHHH! RED Triangle and ? mark

Discussion in 'Android Devices' started by napster1970, May 30, 2011.

  1. napster1970

    napster1970 Lurker
    Thread Starter

    I have a CDMA HTC DESIRE that had 2.1 stock, I rooted it using unrevoked and recently there was an OTA update w/ 2.2 and I have saved it to sd card hoping I will be able to use it. Unfortuntaely, I have really messed up my phone as I downloaded the wrong official RUU,(which removed unrevoked root), unable to access clockwork recv as I keep getting red triangle w/ an ! and now I am also getting a pic of a phone w/ a red question mark when I try to do a flash. I am able to now root again with Z4root and also have the official OTA update stored on my PC and when I attempt to install on phone I keep getting the whole aborted signature failed status 7 and etc.... I have tried the various .zip methods recomended in the posts but with no luck and I am very frustrated. However, the good thing is that I am able to make and receive calls at least. I am in way over my head and realize my ignorance has brought this upon me. Any help is very much appreciated as I have spent all weekend trying to get back to my original stock 2.1.
     


  2. InfernalByte

    InfernalByte Android Expert

    What do you do to get the red triangle?
     
  3. SUroot

    SUroot Extreme Android User

    The red triangle means you have HTC recovery now.

    What RUU did you download incorrectly?

    The question mark when you try to flash what exactly?
     
  4. napster1970

    napster1970 Lurker
    Thread Starter

    it appears when I select recovery at the white screen with android guys on skateboards
     
  5. napster1970

    napster1970 Lurker
    Thread Starter

  6. SUroot

    SUroot Extreme Android User

    You've completely unrooted your phone. You should not use Rom manager ever. When you root with unrevoked you true flash clockwork. You now have HTC recovery.

    You'll either have to RUU the correct one or root depending what you want at the end of all this
     
  7. napster1970

    napster1970 Lurker
    Thread Starter

    Is there a universal ruu installshield wizard program for a windows pc? That would be very helpful and quite possibly resolve this. Thanks
     
  8. SUroot

    SUroot Extreme Android User

    What? No. It doesn't install. It just runs. Did you try running as Admin?

    The install shield just opens the RUU. What is the problem you have?
     
  9. napster1970

    napster1970 Lurker
    Thread Starter

    I am unable to get the RUU to upload and install from my sd card
     
  10. SUroot

    SUroot Extreme Android User

    I still dont understand. Upload where? RUU's dont install from the SD card. Only PB99IMG.zip does, Please can you be clear?
     
  11. napster1970

    napster1970 Lurker
    Thread Starter

    I have the official carrier software on my pc and I have been able to transfer onto my sd card, I can access it but astro file manager will not give me option to install app.. now I cant reroot it using unrevoked b/c the RUU I now have has my hboot as 1.6. Below is what my phone has now BRAVOC DVT2 SHIP S-OFF
    HBOOT--1.06.0000
    RADIO-2.15.00.11.16
     
  12. Hadron

    Hadron Smoke me a kipper...
    VIP Member

    But when you say you have put the software on your SD card, what exactly have you put on there? If it's an RUU .exe file that's a windows program. If it's a PB99IMG.zip you need to install it from hboot. If it's something else....?
     
  13. SUroot

    SUroot Extreme Android User

    Oh I get it, he is talking about this thread here:

    http://androidforums.com/desire-all-things-root/345318-aaaaarrrggghhh-red-triangle-mark.html

    I am still unsure if he has an RUU.exe to run from a PC or a PB99IMG.zip to run from Hboot on SD card.

    Edit>Reported to get these posts moved to the relevant thread.
     
  14. napster1970

    napster1970 Lurker
    Thread Starter

    I have both RUU.exe to run from a PC or a PB99IMG.zip to run from Hboot on SD card. I am losing my mind over this.. really lost
     
  15. SUroot

    SUroot Extreme Android User

    ...and the PB99IMG.zip is spelled exactly PB99IMG.zip? It goes on the root of the SD card. You boot into Hboot and it automatically picks it up? Then what does it say?
     
  16. napster1970

    napster1970 Lurker
    Thread Starter

    HBOOT doesnt recognize PB99IMG.zip... I have been playing around w/ phone and posted below is my progress... have no idea what all this is:

    I-recovery"
    Command: "/sbin/recovery" "--update_package=CACHE:update.zip"
    ro.secure=0
    ro.allow.mock.location=1
    ro.debuggable=1
    persist.service.adb.enable=1
    ro.build.id=ECLAIR
    ro.build.display.id=koush_bravoc-eng 2.1-update1 ECLAIR eng.koush.20100902.183803 test-keys
    ro.build.version.incremental=eng.koush.20100902.183803
    ro.build.version.sdk=7
    ro.build.version.codename=REL
    ro.build.version.release=2.1-update1
    ro.build.date=Thu Sep 2 18:39:04 PDT 2010
    ro.build.date.utc=1283477944
    ro.build.type=eng
    ro.build.user=koush
    ro.build.host=Koushik-OSx86.local
    ro.build.tags=test-keys
    ro.product.model=HTC Desire CDMA
    ro.product.brand=generic
    ro.product.name=koush_bravoc
    ro.product.device=bravoc
    ro.product.board=bravoc
    ro.product.cpu.abi=armeabi-v7a
    ro.product.cpu.abi2=armeabi
    ro.product.manufacturer=htc
    ro.product.locale.language=mdpi
    ro.product.locale.region=
    ro.wifi.channels=
    ro.board.platform=qsd8k
    ro.build.product=bravoc
    ro.build.description=koush_bravoc-eng 2.1-update1 ECLAIR eng.koush.20100902.183803 test-keys
    ro.kernel.android.checkjni=1
    ro.setupwizard.mode=OPTIONAL
    net.bt.name=Android
    net.change=net.bt.name
    ro.config.sync=yes
    dalvik.vm.stack-trace-file=/data/anr/traces.txt
    ro.factorytest=0
    ro.serialno=HT09RHM01983
    ro.bootmode=recovery
    ro.baseband=2.15.00.11.16
    ro.carrier=COMMON
    ro.bootloader=1.06.0000
    ro.hardware=bravoc
    ro.revision=5
    init.svc.recovery=running
    init.svc.adbd=running
    Finding update package...
    I:Update location: CACHE:update.zip
    Opening update package...
    I:Update file path: /cache/update.zip
    I:1 key(s) loaded from /res/keys
    Verifying update package...
    I:comment is 1738 bytes; signature 1720 bytes from end
    I:whole-file signature verified
    I:verify_file returned 0
    Installing update...
    I:Trying update-binary.
    Replacing stock recovery with ClockworkMod recovery...
    about to run program [/sbin/busybox] with 4 args
    sh: bad pid 'root'
    sh: can't kill pid 3364: No such process
    sh: bad pid 'S'
    sh: bad pid '/sbin/adbd'
    sh: bad pid 'recovery'
    Starting recovery on Fri Jun 3 00:51:19 2011
    can't open /dev/tty0: No such file or directory
    framebuffer: fd 3 (480 x 800)
    ClockworkMod Recovery v2.5.0.9
    I:Boot command: boot-recovery
    I:Set boot command "boot-recovery"
    Command: "/sbin/recovery"
    ro.secure=0
    ro.allow.mock.location=1
    ro.debuggable=1
    persist.service.adb.enable=1
    ro.build.id=ECLAIR
    ro.build.display.id=koush_bravoc-eng 2.1-update1 ECLAIR eng.koush.20100902.183803 test-keys
    ro.build.version.incremental=eng.koush.20100902.183803
    ro.build.version.sdk=7
    ro.build.version.codename=REL
    ro.build.version.release=2.1-update1
    ro.build.date=Thu Sep 2 18:39:04 PDT 2010
    ro.build.date.utc=1283477944
    ro.build.type=eng
    ro.build.user=koush
    ro.build.host=Koushik-OSx86.local
    ro.build.tags=test-keys
    ro.product.model=HTC Desire CDMA
    ro.product.brand=generic
    ro.product.name=koush_bravoc
    ro.product.device=bravoc
    ro.product.board=bravoc
    ro.product.cpu.abi=armeabi-v7a
    ro.product.cpu.abi2=armeabi
    ro.product.manufacturer=htc
    ro.product.locale.language=mdpi
    ro.product.locale.region=
    ro.wifi.channels=
    ro.board.platform=qsd8k
    ro.build.product=bravoc
    ro.build.description=koush_bravoc-eng 2.1-update1 ECLAIR eng.koush.20100902.183803 test-keys
    ro.kernel.android.checkjni=1
    ro.setupwizard.mode=OPTIONAL
    net.bt.name=Android
    net.change=net.bt.name
    ro.config.sync=yes
    dalvik.vm.stack-trace-file=/data/anr/traces.txt
    ro.factorytest=0
    ro.serialno=HT09RHM01983
    ro.bootmode=recovery
    ro.baseband=2.15.00.11.16
    ro.carrier=COMMON
    ro.bootloader=1.06.0000
    ro.hardware=bravoc
    ro.revision=5
    init.svc.recovery=running
    init.svc.adbd=running
    I:Checking for extendedcommand...
    I:Running extendedcommand...
    Waiting for SD Card to mount (20s)
    SD Card mounted...
    I:Running script:
    I:
    print "ROM Manager Version 4.3.1.3"
    print "Preparing to install ROM..."
    run_program /cache/dowipedalvikcache.sh
    install_zip SDCARD:/update.zip
    Parsed /tmp/extendedcommand
    calling command print
    ROM Manager Version 4.3.1.3
    calling command print
    Preparing to install ROM...
    calling command run_program
    mount: mounting /dev/block/mtdblock4 on /cache failed: Device or resource busy
    calling command install_zip
    -- Installing: SDCARD:/update.zip
    I:Set boot command "boot-recovery"
    Finding update package...
    I:Update location: SDCARD:/update.zip
    Opening update package...
    I:Update file path: /sdcard/update.zip
    Installing update...
    I:Trying update-binary.
    script aborted: assert failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "utstarcom_wwe-generic/bravoc/bravoc/bravoc:2.1-update1/ERE27/263104:user/release-keys" ||
    file_getprop("/system/build.prop", "ro.build.fingerprint") == "utstarcom_wwe-generic/bravoc/bravoc/bravoc:2.2/FRF91/342208:user/release-keys"
    assert failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "utstarcom_wwe-generic/bravoc/bravoc/bravoc:2.1-update1/ERE27/263104:user/release-keys" || file_getprop("/system/build.prop", "ro.build.fingerprint") == "utstarcom_wwe-generic/bravoc/bravoc/bravoc:2.2/FRF91/342208:user/release-keys"
    E:Error in /sdcard/update.zip
    (Status 7)
    Installation aborted.
    Failure at line 4:
    install_zip SDCARD:/update.zip
     
  17. SUroot

    SUroot Extreme Android User

    What does hboot say?

    It needs to be on the root of sd not in a folder. It is case sensitive so it must be called PB99IMG.zip not pb99img.zip or pb99img.zip.zip
     
  18. Hadron

    Hadron Smoke me a kipper...
    VIP Member

    Are you actually using HBOOT to try to install the PB99IMG.zip file? To be absolutely explicit:

    boot while pressing the "volume down" key
    when the hboot screen (white, little skateboarding androids at the bottom comes up) it will ask you whether you want to update. Press "volume up" to agree.

    That log has a lot of references to things I wouldn't expect to see in this process, or with an official HTC RUU, in particular "koush", "clockworkmod" and "ROM Manager". Just from that log I'd have guessed that you were trying to install it with ROM Manager, except that I thought you weren't rooted any more.
     
  19. napster1970

    napster1970 Lurker
    Thread Starter

    I was able to reroot my desire and I would like to use something other than rom manager but I am unaware of any similar program.
     
  20. SUroot

    SUroot Extreme Android User

    Just boot into recovery manually.

    Boot to hboot (vol down + power)

    Use volume to highlight recovery.

    Press Power to select recovery.

    ROM manager shouldnt be used as it causes many issues on this device.

    But further to that, you do not use ROM manager or recovery for PB99IMG. You just boot into hboot and it does the rest for you.
     
  21. EddyOS

    EddyOS Android Expert

    Looks like he was trying to flash a stock PB99IMG.zip through a custom recovery
     
  22. SUroot

    SUroot Extreme Android User

    He was.
     

HTC Desire Forum

Features and specs are not yet known.

unknown
Release Date
0
Reviews
Loading...

Share This Page

Loading...