Sent from my SPH-M820-BST using Tapatalk 2 Beta-5

 

Went up to 122 but locked up

Sent from my SPH-M820-BST using Tapatalk 2 Beta-5

 

2011 or uh 2012
heehhee!
I do that to at 3:50am

 

Yeah finally!
Bumped it to 900 Max
120 min
Vr
Lag free and minmax

Edit: rockin the 946!!!!
And just so you know
I flashed kato's kernel for ctmod
Set it at 825 with smartassv2
Min 120
And shut the screen off didn't mess with it pretty much all day. At the end of the day ran it hard then was able to bump it to 900 but lost data2sd
Reflashed kk 2.4 and good to go

 

Seams mine will Jam up with anything over 800.... Wonder why mine is so poor, Its not running real warm.

 

From what I understand, computer chip manufacturers don't make individual chips at different speeds, they make a batch of identical chips, they test each one individually to see how it does. Then depending on how it performs, it's sorted out into its different speeds. One chip may run fine at 850mhz, but the next one may only hit 825mhz, even though they were made exactly the same. But they can't sell that many different speeds of chip, so they round them all down to the closest stable performance point (or even lower, depending on supply and demand). Our chips are rated for 800 mhz, yours was probably close to it but still passed. Luck of the draw i suppose.

 

Gotta love your colors... lol!

Sent from my pumped up Prevail running CTMod 3.4 OCd to 925 MHz with Tapatalk 2 Beta 6

 

My Prevail..
CM7 Beta5
Vlotage Control
katoKern w/sd ext
Min 98 (no wake up lag at all)
Max 946
I/O scheduler: noop ( best for me. tested all of them. 24hours each w/ heavy use)
CPU Governor: smartassv2 ( also best for me. tested the same way)
Batt. Temp never goes over 34*C
Batt Life; about 15% worse than stock ROM w/ heavy use

Wife's Prevail
CM7 Beta5
Vlotage Control
katoKern w/sd ext
Min. 400 (had lots of lag and FCs at lower clocks but runs smooth now)
Max 946
I/O Scheduler: noop seems to be the best but still testing
CPU Governor: ondemand but still testing
Bat Temp: comes in higher than mine at like 36-38 max.
Batt Life. About 20% worse than stock ROM with heavy games and use

 

well I'm guessing you were asking for all OC settings reguardless of ROM Lmao.

 

I was having trouble with overclocking. So many settings on CPU Master Pro. So, I got
looking around and found a couple lists that explain and breaks down how each scaling setting works. Now knowing what each setting can do, I find it much easier to try out different settings to find a balance between performance and good battery life.

Here is the first one. It is a little older, but does have good insight and pros and cons which I found nice.

CPU Governors - RootzWiki


Here is an updated one with the newer settings and lots of information for each setting.

CPU Governor List - Android @ MoDaCo

I hope this helps anyone that may be as confused as I was about CPU settings.

 

CT Mod 3.5
Voltage Control
Min - 320
Max - 900
I/O - Deadline
Governor - Smoothass
These are the settings Bloodawn posted. After trying many setting combinations, this is the only one that gives me zero lag, regardless of what I am doing. Thanks Bloodawn.

 

Half Ass Rom with KK2.4
Voltage Control
min 200
max 900
I/O sio
gov smoothass

 

I'm running Honeybread6 and using Voltage Control.
Min 120
Max 900
Scheduler: sio
Governor: smartassV2
Settings saved as init.d script

phone is running smooth and battery is decent

 

I was running the scaling at Lionheart and the GPU control at sio when I ran my last benchmark last night. I'm currently running CM7 Kato Kernel 0.4 sd-ext, Hroark's Adreno update, and a MDPI version of the Black Funk theme from XDA also. I am also currently experimenting with a few build prop tweaks too.



This is how I feel when I'm tweaking my phone and things don't go right, especially figuring out the best overclock settings. LOL!!!!

 

Yes it is I'm currently running rose setting Bloodoodawn has a good description on how to do this I was a newbie too but got it done. I will locate the link for you but I'm a new member so don't know if it'll let me post it

 

I have a Galaxy Prevail and it's rooted. I have the Voltage Control app. I want to know how to use it. The app is very confusing. Can someone tell me how to operate the app?

 

Hey wet how can i set to init setting im using voltage control and i dont see the option anywhere? btw im running the beast at

946max
performance
sio

anything else and i get a reboot upon leaving voltage control WTF.....

haha as im writing this i decided to hit far left softkey while in VC wow its def 5am lmao