1. Are you ready for the Galaxy S20? Here is everything we know so far!

(Guide) Restoring Stock Firmware

Discussion in 'Android Devices' started by Jisaeus, Oct 25, 2014.

  1. Jisaeus

    Jisaeus Lurker
    Thread Starter

    Here is a quick guide for those who need to return to Stock. This has been tested on my LG Pad 7.0, which I was customizing after rooting, and something went wrong. I took a couple of hours trying to get an official copy of the stock firmware, and once I got my device back up and running decided to post a guide for future reference.

    Keep in mind that this replaces all the system files on the tablet that might have been removed, modified, or replaced. Please MAKE A BACKUP OF YOUR PICTURES, MUSIC, OR DOCUMENTS.

    Quick disclaimer though, I'm not responsible if you tablet somehow freaks out, and cannot be used anymore, but the likeliness of this happening is about as likely as you winning the lottery, so if it does, you might want to buy a lottery ticket.


    ---------------------------------------------------
    STEP ONE
    ---------------------------------------------------

    Download the following files below:

    LG Driver: Download Here
    LG Tools 2014: Download Here
    LG Firmware: Download Here

    ---------------------------------------------------
    STEP TWO
    ---------------------------------------------------

    Install the LG Driver onto your computer, then reboot.

    ---------------------------------------------------
    STEP THREE
    ---------------------------------------------------

    Extract the LG Tools 2014 FOLDER to your DESKTOP.

    ---------------------------------------------------
    STEP FOUR
    ---------------------------------------------------

    Move the FIRMWARE to the LG TOOLS 2014 FOLDER on your desktop. *Will make it easier to locate when needed*

    ---------------------------------------------------
    STEP FIVE
    ---------------------------------------------------

    TURN OFF your tablet! Plug your USB WIRE into a USB slot on your machine. When it's plugged in, hold on the Volume UP button on the tablet and at the same time plug in the USB wire. Hold onto the volume button until you see the follow:

    [​IMG]

    ---------------------------------------------------
    STEP SIX
    ---------------------------------------------------

    OPEN the LG Tools Folder, you should have the following:

    [​IMG]

    Click on the LGFLASHTOOL2014 file. Then you should see this:

    [​IMG]

    You need to make sure that the Select Type is 3GQCT, and the PhoneMode is EMERGENCY. Also, Select the KDZ file (Firmware) that you placed in the the LG Tools 2014 folder. Then Press Normal Flash.

    [​IMG]

    This should popup right after, and you just need to click start. Then another thing (below) should pop up.

    [​IMG]

    Just click OK Reason why is that your device will use English as it's default regardless. Now once you see this (below) sit back and wait. Shouldn't take no longer then 15 - 30 minutes.

    [​IMG]

    Congrats! Your device should be completely up and running again!


     


    KOLIO likes this.
  2. Best Answer:
    Post #17 by Terminator_7, Jun 30, 2015 (1 points)

    1. Download the Forums for Android™ app!


      Download

       
  3. Jisaeus

    Jisaeus Lurker
    Thread Starter

    (future post)
     
  4. 13lackf0x

    13lackf0x Lurker

    This doesn't work for me... Every time I use the LG software to flash my G Pad it keeps saying "couldn't connect to server"... Any tips?
     
  5. 13lackf0x

    13lackf0x Lurker

    There is another dialog that also says "the upgrade stopped due to an error." Any ideas??

    ::EDIT::

    I'm pretty sure I'm getting this error because I'm using the wrong firmware. I need the firmware for v410 model. Where did you download your firmware from?

    ::EDIT 2::

    I finally found the correct firmware after searching for hours... If anybody needs it, send me a message.
     
  6. Jisaeus

    Jisaeus Lurker
    Thread Starter

    Can you message it to me so I may update this post?
     
  7. sygsogo

    sygsogo Lurker

    I need v410 firmware.. Could you send to me??

     
  8. rheck4096

    rheck4096 Lurker

    I need the 410 KDZ file!
     
  9. xman95

    xman95 Android Enthusiast

     
  10. Murphylee1983

    Murphylee1983 Lurker

    Did you by chance get a resolution on this. I am stuck and need the v410 .kdz.
     
  11. Oditius

    Oditius Newbie

    Not working. Need to update to v410
     
  12. donalex

    donalex Lurker

    I need v410 stock firmware
     
  13. donalex

    donalex Lurker

    I need stock firmware for gpad7.0 v410
     
  14. khysell

    khysell Lurker

    You should specify this is for the Gpad 7 v400.
    I also need the stock firmware for the Gpad 7 V410.
     
  15. donalex

    donalex Lurker

    I need stock v410 for glad 7.0
     
  16. I need the 410 KDZ please.
     
  17. Terminator_7

    Terminator_7 Lurker


    Please friend your help, I have my LG G Pad V410 as a brick and KDZ not find the software, you could please send me a message.
     
  18. Terminator_7

    Terminator_7 Lurker

    Some of you found the KDZ file for the model LG G Pad V410?
     
  19. drudrumauro

    drudrumauro Member

    can someone send me lg g pad atnt lte v410 kdz please
     
  20. drudrumauro

    drudrumauro Member

    can u send me lg g pad v410 kdz file please
     
  21. Walldo96221

    Walldo96221 Lurker

    I need the lg v410 kdz file can u send it to me please
     
  22. cbmhurley

    cbmhurley Lurker

    You still have the kdz or a link
     
  23. lingo2016

    lingo2016 Lurker

    Need the v410 firmware if you still have it
     
  24. wmy

    wmy Lurker

    Anybody ever get the kdz for the v410 ??
     
  25. Taz_Oh

    Taz_Oh Lurker

    Did anyone ever find the KDZ file for the V410? I need it. if you have it and are willing to share, please do. TIA
     
  26. hey if you still have that firmware for that lg g pd 7.0 v410 can you email me the link to it please i need it bad thanks my names is john and my email is jcwoolen@gmail.com please thanks for you help
     
Loading...
Similar Threads - Guide Restoring Stock
  1. decosoftapp
    Replies:
    0
    Views:
    337
  2. DecosoftApps
    Replies:
    1
    Views:
    415
  3. App Update
    Replies:
    2
    Views:
    609
  4. Paozi
    Replies:
    3
    Views:
    626
  5. App Update
    Replies:
    0
    Views:
    543
  6. kisame010588
    Replies:
    0
    Views:
    2,006
  7. kisame010588
    Replies:
    5
    Views:
    1,236
  8. App Update
    Replies:
    1
    Views:
    583
  9. App Update
    Replies:
    0
    Views:
    6,297
  10. codezer0
    Replies:
    25
    Views:
    3,380

Share This Page

Loading...