• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root Help !!! Phone wont boot after flashing !!

aninguh

Newbie
Dec 3, 2012
12
1
Hi,

Need help. I tried to update my A90S from Android 4.0.4 to Jelly bean as mentioned in A110 guide using Smart Phone Flash Tool. The flashing went fine (as on screen). Even got the GREEN LOGO which means flashing was successful.

But cant seems to start the phone even on recovery. Its completely dead.

Awaiting expert opinions.

Regards,
Anindya
 
Is the software for the A110 compatible with the a90s? If it is not then that is your problem and you need to find the software for the a90S.

Update: The JB update for the A110 is not compatible with the a90s. You need to contact micromax and try and get the software for your the a90s. Their website does not have the download.
 
Upvote 0
Is the software for the A110 compatible with the a90s? If it is not then that is your problem and you need to find the software for the a90S.

Update: The JB update for the A110 is not compatible with the a90s. You need to contact micromax and try and get the software for your the a90s. Their website does not have the download.


You are right. I might have flashed the wrong ROM resulting in hard brick. Had to get the motherboard replaced. It costed Rs. 2700.
 
Upvote 0
Hello man you dont need to replace mothr brd.


You downlod A90 stock rom at andro-park or at need rom.com

After dat go to sp flash tool and select scatter file from da downloaded unzipped file.
And select recovery file CWM 6 from your pc wer u put.

Then ready to flash your phone. By following methods.


Remove and reinsert battery

Press download button. Connect phone via usb. It wil show red,purple n yellow processing status.
If its done enjoy.....
If download button doesn't work
Retry above same process by pressing firmware upgrade botton beside download botton.

If above both were not flashed your phone.. do the same process without battery in phone. It must unbrick ur phone fortunately.


After booting ur phone shows invalid IMEIs. GOOGLE IT

It will b better if you have CWM back up earlier.

Do it your own risk.

Thanks
HAVE A GRT DAY
 
Upvote 0
Hello man you dont need to replace mothr brd.


You downlod A90 stock rom at andro-park or at need rom.com

After dat go to sp flash tool and select scatter file from da downloaded unzipped file.
And select recovery file CWM 6 from your pc wer u put.

Then ready to flash your phone. By following methods.


Remove and reinsert battery

Press download button. Connect phone via usb. It wil show red,purple n yellow processing status.
If its done enjoy.....
If download button doesn't work
Retry above same process by pressing firmware upgrade botton beside download botton.

If above both were not flashed your phone.. do the same process without battery in phone. It must unbrick ur phone fortunately.


After booting ur phone shows invalid IMEIs. GOOGLE IT

It will b better if you have CWM back up earlier.

Do it your own risk.

Thanks
HAVE A GRT DAY


Tried the above steps as mentioned. Didn't workout. So had to replace Motherboard.
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones