• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root Mms works for our phones on cm 10

wolfu

Well-Known Member
Jun 11, 2012
163
38
Minneapolis
So I was screwing around with [ROM / KERNEL] [Team D.I.R.T] [LINARO OPTIMIZED] [JB 4.1.2] UNOFFICIAL AOKP v3.5.2
I installed the black APK to recieve mms. then for the hell of it I did their fix for boost HOW TO GET MMS GOING FOR BOOST MOBILE but did it for us

1. Use the Voice Dailer and say "Open APNs"
2. Click on "Open APNs"
3. Click on the default Sprint Access Point tab
4. Put in the following settings....

Name: Sprint
APN: Sprint
Proxy: Not set
Port: Not set
Username: Sprint
Password: .
Server: .
MMSC: http://mmsc.vmobl.com:8088/mms?
MMS proxy: Not set
MMS port: Not set
MMC: 310
MNC: 120
Authentication type: PAP or CHAP
APN type: Not set
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (darkened out)
Bearer: Unspecified

Now I can send and recieve MMS :smokingsomb:

Here's the link to this great ROM http://forum.xda-developers.com/showthread.php?t=1831841
 
Well I did all the listed steps for boost, but used the mmcs for virgin; my picture forever says sending when I try to send it to someone. Let me see what happens if I leave the defaults with virgin mmcs



I didn't do any steps for Boost the only thing I changed from the default state was the MMSC address. I left everything else the same as it was in the APN settings
 
Upvote 0
Wolf, how long does it take you on average to send and recieve MMS now? Is it almost instant, or is it a few minutes to receive it?

Edit: Also would you mind going to your APNS and taking a screenshot?

Less than a minute to recieve and it even sent over WIFI.
I'm trying to take a screen shot but can't seem to figure it out on this rom.
I'll list everything the way it is set...

Name: Sprint
APN: Sprint
Proxy: Not set
Port: Not set
Username: Sprint
Password: .
Server: .
MMSC: http://mmsc.vmobl.com:8088/mms?
MMS proxy: Not set
MMS port: Not set
MMC: 310
MNC: 120
Authentication type: PAP or CHAP
APN type: Not set
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (darkened out)
Bearer: Unspecified

I will try to take a screen shot
 
  • Like
Reactions: Branhower
Upvote 0
so which settings should be used???
Name = Sprint
APN = Boost_Mobile
Proxy =
Port =
Username =
Password =
Server =
MMSC = http://mm.myboostmobile.com
MMS proxy =
MMS port =
MCC = 310
MNC = 120
Authentication type = PAP or CHAP
APN type =
APN protocol = IPv4
APN roaming protocol = IPv4
APN enable/disable (greyed out) = Apn enabled
Bearer = Unspecifiedost.
the ones from the op

Name: Sprint
APN: Sprint
Proxy: Not set
Port: Not set
Username: Sprint
Password: .
Server: .
MMSC: http://mmsc.vmobl.com:8088/mms?
MMS proxy: Not set
MMS port: Not set
MMC: 310
MNC: 120
Authentication type: PAP or CHAP
APN type: Not set
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (darkened out)
Bearer: Unspecified

or these
 
Upvote 0
Less than a minute to recieve and it even sent over WIFI.
I'm trying to take a screen shot but can't seem to figure it out on this rom.
I'll list everything the way it is set...

Name: Sprint
APN: Sprint
Proxy: Not set
Port: Not set
Username: Sprint
Password: .
Server: .
MMSC: http://mmsc.vmobl.com:8088/mms?
MMS proxy: Not set
MMS port: Not set
MMC: 310
MNC: 120
Authentication type: PAP or CHAP
APN type: Not set
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled (darkened out)
Bearer: Unspecified

I will try to take a screen shot

OhmygodOhmygodOhmygodOhmygod it worked! Here is a pic I sent to my old Tracfone. Running HTCDEV10 and the stock-themed fixed MMS from this thread.
 

Attachments

  • 2013-01-01 11.42.42.jpg
    2013-01-01 11.42.42.jpg
    1.3 MB · Views: 130
Upvote 0
What's the server and password?

Hold on. I'll upload a picture of my exact settings for you folks.

Edit: Hokay so maybe not...no idea where screenshot is in this ROM...

Basically your password should say * by default. Leave it as is. The ONLY thing you need to touch is the MMSC. Everything else should stay defaulted to what it is.
 
Upvote 0
Hold on. I'll upload a picture of my exact settings for you folks.

Edit: Hokay so maybe not...no idea where screenshot is in this ROM...
You need need to enable screenshot on the advanced power menu (APM) in the ROM Control settings and then you can take screenshots using a long press on the power button and selecting screenshot. The images will be stored in /sdcard/pictures/screenshots.

ramjet73
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones