1. Download our Official Android App: Forums for Android!

Support Note 10.1 n8010 showings downloading mode

Discussion in 'Android Help' started by explorerhead, Aug 29, 2016.

  1. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    hello mates, please help
    I recently tried to upgrade mannualy my samsung note 10.1 n8010 using odin. Things went perfect during the proceas and the outcomes were as expected till i got pass confirmation on the odin app, i have waited a long for the auto reboot and was not happening at all and after a while i tried mannyally turn of the tablet and now it is opening up to downlod mode . I tried powerbotton + volume up startup , power botton +volume down startups and power botton + both volume botton startup but its not helpong me. The device is going directly to downloding mode irrespective of combinationand please note i am not getting samsung logo either, kindly help, she is very special to me
     

    Attached Files:


    Advertisement

  2. Bg260

    Bg260  
    VIP Member
    Rank:
     #32
    Points:
    763
    Posts:
    3,538
    Joined:
    Apr 30, 2016

    Apr 30, 2016
    3,538
    3,666
    763
    Male
    Freelance Entrepreneur
    Lincoln
    explorerhead and Jfalls63 like this.
  3. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    Hello mate,
    I have downloaded the suggested firmware from the above link . Please see the below settings from the screenshot and confirm, so that i can proceed, let me know if i am missing any checkboxes.
     

    Attached Files:

    Bg260 likes this.
  4. Bg260

    Bg260  
    VIP Member
    Rank:
     #32
    Points:
    763
    Posts:
    3,538
    Joined:
    Apr 30, 2016

    Apr 30, 2016
    3,538
    3,666
    763
    Male
    Freelance Entrepreneur
    Lincoln
    Looks great, let her rip. What's the worst that can happen?

    Let me know if it works.
     
    badcatz, explorerhead and Jfalls63 like this.
  5. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    Its getting failed
    Below are the logs
    <ID:0/005> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> N8010XXUDNF3_N8010OJVDNF3_HOME.tar.md5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/005> Odin v.3 engine (ID:5)..
    <ID:0/005> File analysis..
    <ID:0/005> SetupConnection..
    <ID:0/005> Initialzation..
    <ID:0/005> Get PIT for mapping..
    <ID:0/005> Firmware update start..
    <ID:0/005> SingleDownload.
    <ID:0/005> sboot.bin
    <ID:0/005> NAND Write Start!!
    <ID:0/005> FAIL!
    <ID:0/005>
    <ID:0/005> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)
     

    Attached Files:

  6. Bg260

    Bg260  
    VIP Member
    Rank:
     #32
    Points:
    763
    Posts:
    3,538
    Joined:
    Apr 30, 2016

    Apr 30, 2016
    3,538
    3,666
    763
    Male
    Freelance Entrepreneur
    Lincoln
    First, are you sure you got the right firmware? Second, try a different usb cable.

    @explorerhead
    These are instructions for a different device, but if that is your firmware you should be able to use SmartSwitch.
     
    #6 Bg260, Aug 29, 2016
    Last edited: Aug 29, 2016
    explorerhead likes this.
  7. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    Regarding the firmware , yes i am sure about it. But i need to arrange a new cable to check, i will keep u posted with the results. Thanks mate for the support
     
    badcatz and Bg260 like this.
  8. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    One more option down
     

    Attached Files:

  9. Bg260

    Bg260  
    VIP Member
    Rank:
     #32
    Points:
    763
    Posts:
    3,538
    Joined:
    Apr 30, 2016

    Apr 30, 2016
    3,538
    3,666
    763
    Male
    Freelance Entrepreneur
    Lincoln
    Darn!
     
    explorerhead likes this.
  10. Jfalls63

    Jfalls63 Android Expert
    Rank:
     #30
    Points:
    818
    Posts:
    4,130
    Joined:
    May 15, 2015

    May 15, 2015
    4,130
    3,052
    818
    Male
    Electrician
    Satsuma,Alabama
    With Smart Switch, select the More tab in the upper right.
    Select Software Update and Initialization, may be worded differently.
    Enter your model number and SN when prompted. Can find on the box if you still have it or maybe on lower back of tablet.
    If your device is supported, then connect to PC with tab in download mode.
     
    badcatz, explorerhead and Bg260 like this.
  11. Bg260

    Bg260  
    VIP Member
    Rank:
     #32
    Points:
    763
    Posts:
    3,538
    Joined:
    Apr 30, 2016

    Apr 30, 2016
    3,538
    3,666
    763
    Male
    Freelance Entrepreneur
    Lincoln
    Thanks, I was about to ping you.
     
    explorerhead likes this.
  12. Jfalls63

    Jfalls63 Android Expert
    Rank:
     #30
    Points:
    818
    Posts:
    4,130
    Joined:
    May 15, 2015

    May 15, 2015
    4,130
    3,052
    818
    Male
    Electrician
    Satsuma,Alabama
    explorerhead likes this.
  13. Jfalls63

    Jfalls63 Android Expert
    Rank:
     #30
    Points:
    818
    Posts:
    4,130
    Joined:
    May 15, 2015

    May 15, 2015
    4,130
    3,052
    818
    Male
    Electrician
    Satsuma,Alabama
    @explorerhead, what country firmware did you download from Sammobile?
     
    explorerhead likes this.
  14. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    United arab emirates
     
  15. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    Thanks jfalls60 and bg260, i feel more powered with the threads, will check abd update
     
  16. Jfalls63

    Jfalls63 Android Expert
    Rank:
     #30
    Points:
    818
    Posts:
    4,130
    Joined:
    May 15, 2015

    May 15, 2015
    4,130
    3,052
    818
    Male
    Electrician
    Satsuma,Alabama
    Is that where the tablet was originally purchased?
     
  17. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    Yes
     
    Bg260 likes this.
  18. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    @Bg260 @Jfalls63 i broght new cable and tried using smart switch but its unsupportrd
     
  19. Jfalls63

    Jfalls63 Android Expert
    Rank:
     #30
    Points:
    818
    Posts:
    4,130
    Joined:
    May 15, 2015

    May 15, 2015
    4,130
    3,052
    818
    Male
    Electrician
    Satsuma,Alabama
    You can try flashing the stock firmware with Odin again. Fail after Nand Write Start is usually not a good sign, hopefully nothing is wrong with the motherboard.
     
  20. Jfalls63

    Jfalls63 Android Expert
    Rank:
     #30
    Points:
    818
    Posts:
    4,130
    Joined:
    May 15, 2015

    May 15, 2015
    4,130
    3,052
    818
    Male
    Electrician
    Satsuma,Alabama
    Which version of Odin are you using?
    Should be a link to 3.11 near the bottom of the Sammobile download page for the firmware.
     
    explorerhead likes this.
  21. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
  22. Jfalls63

    Jfalls63 Android Expert
    Rank:
     #30
    Points:
    818
    Posts:
    4,130
    Joined:
    May 15, 2015

    May 15, 2015
    4,130
    3,052
    818
    Male
    Electrician
    Satsuma,Alabama
    Could also try a different PC if one available
     
  23. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
    already tried with different pc.
    below are the logs with odin 3.12
    <ID:0/004> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/004> Odin engine v(ID:3.1203)..
    <ID:0/004> File analysis..
    <ID:0/004> SetupConnection..
    <ID:0/004> Initialzation..
    <ID:0/004> Get PIT for mapping..
    <ID:0/004> Firmware update start..
    <ID:0/004> SingleDownload.
    <ID:0/004> sboot.bin
    <ID:0/004> FAIL!
    <ID:0/004>
    <ID:0/004> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1
     
  24. explorerhead

    explorerhead Member
    Thread Starter
    Rank:
    None
    Points:
    18
    Posts:
    36
    Joined:
    Aug 29, 2016

    Aug 29, 2016
    36
    10
    18
    Male
  25. Jfalls63

    Jfalls63 Android Expert
    Rank:
     #30
    Points:
    818
    Posts:
    4,130
    Joined:
    May 15, 2015

    May 15, 2015
    4,130
    3,052
    818
    Male
    Electrician
    Satsuma,Alabama
    I was actually looking at the same thread. A little beyond my PC abilities.
    Another thing I was thinking is to download the firmware again. Even though Odin says MD5 check ok , there might be something wrong with the download.
     
    Bg260 likes this.

Share This Page

Loading...