1. Are you ready for the Galaxy S20? Here is everything we know so far!

Replaced digitizer on phone, now screen is unresponsive

Discussion in 'Android Lounge' started by dfarrant81, Oct 13, 2014.

  1. dfarrant81

    dfarrant81 Newbie
    Thread Starter

    Hi
    I have replaced the digitzer on my Huawei Ascend Y300 now the screen is un responsive and not calibrated properly. The screen works but you have to press a few times to select a button and you have to aim slightly above the button to press it. When I replaced the digitizer, I noticed a plastic film, like a screen protector on the other side of the digitizer (the side that is in contact with the LCD) and when I peeled up the corner of this film, the glass was oily, so I stuck it back down. Should I have removed this film before installing the digitizer?
    Thanks, Dan.
     



    1. Download the Forums for Android™ app!


      Download

       
  2. BRAINZ2013

    BRAINZ2013 Extreme Android User

    Hmmmmm sounds like you may need to get another digitalizer
     
  3. dfarrant81

    dfarrant81 Newbie
    Thread Starter

    I have removed the film on the back anyway and the screen is much more responsive and the calibration is spot on, so it would seem the problem is solved!
     
  4. The film has to be removed before you install a digitizer. Any reputable guy-who-fixes-phones would tell you this
     
    dfarrant81 likes this.
  5. dfarrant81

    dfarrant81 Newbie
    Thread Starter

    I wasn't sure because it seemed oily but now I know that the oily stuff makes the screen more sensitive and responsive. Thanks anyway.
     
Loading...

Share This Page

Loading...