Very similar to obsidian froyo 2.2 but its Twiz free and has more fixes. http://board.teamwhiskey.com/viewtopic.php?f=3&t=181 as always flash at your own risk and follow all directions! Known issues: Potential Compatibility Issues with numerous programs not yet designed to accept Vibrant on this build number. Installation Instructions: Step 1: Disable Voodoo or other Lag Fix - This is outlined for Voodoo users but applies should you have any other lagfix applied. This step only directly applies to those of you who are currently using the Voodoo lag fix. If you are not currently using Voodoo, please move onto step 3 for final installation instructions. If you are using an ext2 lag fix such as Ryans, you can simply flash on top. 1. Download the attached 'disable-voodoo.zip' flashable deactivator. 2. Load file onto your internal sdcard 3. Reboot into clockwork recovery and select 'install zip from sdcard'. 4. Select 'choose zip from sdcard' and locate the deactivator file. 5. Select the file and flash. 6. Reboot phone and proceed to step 3 of the installation instructions. Step 2: Nandroid Backup - Before you perform ANY modifications, you should always perform a nandroid backup. The nandroid backup will allow you to step backwards and restore your previous settings in the event the unthinkable happens. To perform a nandroid please follow these steps. 1. Reboot via Rom Manager to Clockwork Recovery, or use 'adb reboot recovery'. 2. Using the volume up and down keys, highlight nandroid and press the power button to select. 3. Select backup, this will take some time depending on the volume of your data. Be patient! Step 3: Flash Bionix Obsidian This is the final step of the installation. This presumes you are already rooted and ready to go. If you are not, then you will need to root and install rom manager first. 1. Download the rom of your choice and place the file onto the root of your internal sdcard. 2. Reboot into Clockwork Recovery. - From Rom Manager app, select 'boot into clockwork recovery' - From ADB, type 'adb reboot recovery'. 3. From the main clockwork recovery menu, use the 'down' volume control to scroll to 'install zip from sdcard'. Press the power button. this will take you to a second menu screen. 4. From thet second menu screen, scroll to 'choose zip from sdcard' and select with the power button. 5. Scroll to the file name of the rom you downloaded and press the power button. It will ask you to confirm your choice, select 'yes' and the rom will begin to flash. DO NOT TURN OFF YOUR PHONE DURING THIS PROCESS! 6. Once the flash is complete, select 'go back'. Now select 'reboot' from this menu. 7. Allow your phone to reboot completely. The first boot will take a few minutes, please be patient. 8. Once booted into the home screen, please allow your phone to sit for 5-10 minutes to allow all boot procedures to take place. Keep in mind, you've just heavily modified your device, it needs time to adjust to the new changes. 9. Wait roughly 15 minutes after the first initial boot and then restart your phone one time. You may do this by holding the 'power button' and selecting either shut down or reboot. 10. At this point, if you are running an overclock kernel, you will need to download setcpu and adjust your clock speeds. You need to be sure your minimum clock speed is set to 200mhz. Optimal settings are 200/1200. Downloads: By continuing below this line, you have acknowledged that you have read the entire document and understand what needs to be done and risks involved with flashing your device. Team Whiskey is in no way responsible for loss, damage, theft, envy, indigestion, incineration, or any other random acts that may come as a result from your flash. If you acknowledge, please continue to Team Whiskeys download page. ENJOY! http://teamwhiskey.com/bin/OnyxR21.zip This release is based solely on the JK2 build. Kernel, Modem, and all system files were derived from that ROM by Team Whiskey. This is in no way a kang or copy of any othe work done or being done at this time. Per the sources wishes, the unmodified dump is not currently available. It will be in the future, but unfortunately that was a condition of our acquiring said version.