1. Are you ready for the Galaxy S20? Here is everything we know so far!

Seidio Mod possibly needed on Innocase II

Discussion in 'Android Devices' started by lewi3069, Jun 4, 2010.

  1. lewi3069

    lewi3069 Member
    Thread Starter

    If this needs to be moved let me know.... but I just wanted to add this for those who bought the Seidio Innocase II. I noticed that if I pushed on the top two corners it would move and squeak. I'm not sure if this was mine only or if it was from early production but the movement and rubbing on my phone I didn't like because I didn't want any scratches in the end. So here is what I did... For about $2 at your local hobby lobby I went and got some sticky back felt and cut it in 2 little pieces for the top corners. After this no squeak! :eek:

    A few pics... Since I have a full sheet I may mess with it so they are straighter... but why mess with something that works???




    This kinds of shows you what the material looks like...

    BTW all pics were done from my EVO

  2. darweth

    darweth Member

    Does the case recess the camera lens enough so that it is safe?
  3. lewi3069

    lewi3069 Member
    Thread Starter

    yes sir it does.
    redenfield likes this.
  4. rjjr2531

    rjjr2531 Android Enthusiast

    ive been having the same issue. im very anal when it comes to the phones or cases being flush...great solution. ill have to do this...during phone calls i can feel the case slightly move and i hate that...but all in all the case feels great, its thin, and it looks aweoem
  5. lewi3069

    lewi3069 Member
    Thread Starter

    Yea I am just like you when it comes to that... It works very well and you can tell its there unless you take it off, but really why would you do that lol
  6. gt33

    gt33 Member

    I have the same issue with my case, I'll have to try your method out
  7. jmxp69

    jmxp69 Well-Known Member

    Ditto. Same issue. I'll probably do this little mod, but it pisses me off a little to pay $50+ for a "premium" case and have to start gluing bits to it to make it work right. No big deal, just sayin', for $50, it should be as tight as the Hero case.
  8. tx_brandon

    tx_brandon Well-Known Member

  9. tracerit

    tracerit Android Enthusiast

    It's not $50, it's $29.99. $50 is with the holster.

    amazon has the seidio case for $24 with free super saver shipping too
  10. dohmai

    dohmai Member

    looks like amazon isn't shipping it out for 2-3 weeks though =(

    anywhere else with better price than bestbuy?
  11. redenfield

    redenfield Newbie

    I bought two cases from Seidio for my 2 Evo's, one black and one burgandy for my wife's. The black case fits perfectly fine, but the burgandy case is atrocious. I went as far as contacting Seidio to request a replacement as I expect better quality from them. I am going to try the felt mod as a temporary fix, but Seidio should be made aware of this issue. Never had any problems with my innocase II's for the iPhone...
  12. seidioseidio

    seidioseidio Android Enthusiast

    Please PM me your order #,I will follow up this Monday

  13. lewi3069

    lewi3069 Member
    Thread Starter

    Honestly He isn't the only one who wants this fixed... my order # is 337669
    DarkNeo likes this.
  14. DarkNeo

    DarkNeo Android Enthusiast

    I just did this, the case was a little hard to get one and clip. But it feel alot more sturdier.
  15. dohmai

    dohmai Member

    frustrating.. i'm having the same problem now. top right corner isn't snug fit so it's loose and creaks. lots of wiggle room.

    guess i'll have to buy felt.
  16. hperry

    hperry Member

    same problem here with the BB Pt case (identical to seidio). i can't believe they charge $30 for this plastic and it's such a poor fit. seidio is obviously on this forum and should be volunteering to send everyone the necessary felt as well as changing the mfg spec over in china to add felt in the corners!
  17. jmxp69

    jmxp69 Well-Known Member

  18. hperry

    hperry Member

  19. Complex757

    Complex757 Android Enthusiast

    Wish I would have seen this before I ordered it last week :(
  20. mxpocc

    mxpocc Lurker

    I had an innocase surface for my blackberry laying around because I had traded the BB for the Evo, and so I pulled the Seidio felt off the inside of it and cut strips out of it. Placed the stripsin the same location by the camera cutout as the OP, but then added more strips along the sides and by the kick-stand cutout. Snug as hell, now. No problems!
  21. mxpocc

    mxpocc Lurker

    I suggest that you suggest to your company that they send people a pack of that felt that you use on your cases so that they can easily and nicely mod it to fix it. Low cost solution.
  22. lewi3069

    lewi3069 Member
    Thread Starter

    Thats what I was going to use from my hero case... but i was going to sell my hero and wanted to keep the case new.
  23. jellyjamz

    jellyjamz Newbie

    This mod actually works very well =) The creaking has lessened a lot and the case feels a lot tighter. And the extra felt probably increases the protection on the phone because it serves as extra padding.
  24. rzenger

    rzenger Well-Known Member

    If they know they are having issues and as cheap as the material (felt) is they should just line the whole thing with felt, added protection and better fit, problem solved. It's not like they're exactly giving the thing away, what's a few extra pennies if it's going to make their customers happy?
  25. seidioseidio

    seidioseidio Android Enthusiast

    Hello All,

    We have been testing all cases as a precaution to make sure that all cases being shipped pass our standards! If you believe you case is not fitting correctly, please PM us and we will be more than happy to see what we can do for you!


HTC EVO 4G Forum

The HTC EVO 4G release date was June 2010. Features and Specs include a 4.3" inch screen, 8MP camera, 512GB RAM, Snapdragon S1 processor, and 1500mAh battery.

June 2010
Release Date

Share This Page