1. Are you ready for the Galaxy S20? Here is everything we know so far!

Working Edited Cpu Fix File

Discussion in 'Android Devices' started by Squiggz, Aug 13, 2012.

  1. Squiggz

    Squiggz Newbie
    Thread Starter

    For the sake of making things easier to do, Ive copied my init.qcom.post_boot.sh file to share. Its been edited and is working on Black Plague 1.2. This is a WORKING cpu fix.

    I am not liable for any adverse effects that may happen to your device. Use at your own risk.

    Move to SD
    Using a file explorer, delete init.qcom.post_boot.sh file found in system/etc/
    Replace with this file
    Enjoy setting cpu clock speeds


    1. Download the Forums for Android™ app!


  2. Speeds03

    Speeds03 Android Enthusiast

    Awesome, thanks!
  3. VeNoMzRevenge

    VeNoMzRevenge Well-Known Member

    Ok for some reason its working on my ohone now. AFter so many different ones i used. THe ones that came with the rom and the one that draconus did.

    This one is working.
  4. VeNoMzRevenge

    VeNoMzRevenge Well-Known Member

    accidental post
  5. GoOBerMonster

    GoOBerMonster Newbie

    Is there a difference between not having the file and having this file?? Because i deleted the file it was with and they stuck.;)
  6. VeNoMzRevenge

    VeNoMzRevenge Well-Known Member

    Nothing major. I had it running with it del since B.O. came out, and when B.P. came out i had it del too with no issues. I just tried this to see if it would work because I was on lunch and tried it.

    It does work, but IMHO if del works for you too then you are ok.
    My opinion.
  7. myshkin

    myshkin Android Enthusiast

    what does this one say?
  8. airtioteclint

    airtioteclint Android Expert

    Works for me thanks. Dunno why my own didn't i edited this exact same way when the original post came out. Favortism...
  9. myshkin

    myshkin Android Enthusiast

    geez, when I asked what this one said, I didn't realize it showed it when you clicked the download link. I just thought it was going to be a zip. So, this is what I already have mine set as. I did read it correctly and the only thing added was the 2 lines with 1800000 cpu0 and cpu1 scaling_max_freq, correct? There isn't anything new that I overlooked?
  10. Squiggz

    Squiggz Newbie
    Thread Starter

    Nothing new. Some people have had issues where the fix wouldn't work for whatever reason so, I made a copy of mine to share. I've tested it on a couple of Connect devices and it works. Same fix but works.
  11. Lito007

    Lito007 Member

    What he said O_O.... haha this one really is the only one that sticks for me as well. THANK YOU :D much appreciated
  12. DrHangman

    DrHangman Well-Known Member

    Installed it on my wife's phone, works like a charm.
    Using the Black Plague 1.2 and there are no more issues with the CPU speeds changing at will.

    Will recommend to many...
  13. glopez

    glopez Newbie

    It might have been my phone, but after installing this on bp 1.2 my battery would go as high as 125 degrees. I had it under clocked at 900. On idle it wouldn't go lower than 105. It did work for me but it just caused my phone to heat up to much. Thanks anyway.
  14. gigermunit

    gigermunit Newbie

    Worked for me on stock.
  15. martin26765

    martin26765 Newbie

    Working like a charm on numer two rom with balck pague kernel. Thank you so muchh.

LG Connect 4G Forum

The LG Connect 4G release date was February 2012. Features and Specs include a 4.0" inch screen, 5MP camera, 1GB RAM, Snapdragon S3 processor, and 1540mAh battery.

February 2012
Release Date

Share This Page