1. Download our Official Android App: Forums for Android!

General xt1080 write protected?

Discussion in 'Android Devices' started by evil_haxor, Sep 5, 2016.

  1. evil_haxor

    evil_haxor Member
    Thread Starter
    Rank:
    None
    Points:
    26
    Posts:
    32
    Joined:
    Jul 15, 2015

    Jul 15, 2015
    32
    9
    26
    Male
    I was given a xt1080 for repair

    24.13.2.obake-maxx
    SU6-7.2
    Locked bootloader. No root. No adb access.



    System boots but there is constants force close of background processes like gapps and acore.

    I wanted to factory reset and I did but on reboot it had all the same apps and user data intact, no factory state.

    Changing any config or uninstalling any app result in it being back after reboot.



    What I've tried so far:



    -Factory option in AP Fastboot menu. Reboots to system with all the data intact.

    -Recovery option in AP Fastboot menu. Reboots to bootloader and states "Boot up failed".



    -fastboot erase userdata

    -fastboot -w

    both with the resulting output:

    erasing 'userdata'...
    OKAY [ 0.500s]
    erasing 'cache'...
    OKAY [ 0.620s]
    finished. total time: 1.120s
    but sadly all userdata is sitting there intact after reboot.


    I downloaded VZW-4.4.4-SU6-7.2-release-keys.xml.zip. Tried with RSDLite but it didn't detect the device.
    I have installed the drivers and MotorolaDeviceManager. So I decompressed the firmware and flashed the partitions
    using fastboot in a script. Resulting in all partitions being flashed OK but after reboot the device
    was the same as before with all the apps and user data present. Spooky isn't it?

    Can some one offer me any advice? Is it a hardware faliure?


    Output of the script follows:

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe oem fb_mode_set
    < waiting for device >
    ...
    OKAY [ 0.109s]
    finished. total time: 0.109s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash partition gpt.bin
    sending 'partition' (32 KB)...
    OKAY [ 0.220s]
    writing 'partition'...
    This may take a few seconds, if a
    different partition table is being
    flashed since we need to backup
    and restore a few partitions
    OKAY [ 0.444s]
    finished. total time: 0.665s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash motoboot motoboot.img
    sending 'motoboot' (1604 KB)...
    OKAY [ 0.360s]
    writing 'motoboot'...
    flashing tz ...
    flashing rpm ...
    flashing aboot ...
    flashing sbl1 ...
    flashing sbl2 ...
    flashing sbl3 ...
    OKAY [ 4.540s]
    finished. total time: 4.900s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash logo logo.bin
    sending 'logo' (215 KB)...
    OKAY [ 0.290s]
    writing 'logo'...
    OKAY [ 0.811s]
    finished. total time: 1.102s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash boot boot.img
    sending 'boot' (10240 KB)...
    OKAY [ 0.900s]
    writing 'boot'...
    OKAY [ 1.872s]
    finished. total time: 2.772s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash recovery recovery.img
    sending 'recovery' (10240 KB)...
    OKAY [ 0.900s]
    writing 'recovery'...
    OKAY [ 1.512s]
    finished. total time: 2.412s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash system system.img
    sending 'system' (786432 KB)...
    OKAY [ 49.426s]
    writing 'system'...
    OKAY [ 54.106s]
    sending 'system' (531955 KB)...
    OKAY [ 33.515s]
    writing 'system'...
    OKAY [ 36.056s]
    finished. total time: 173.103s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash modem NON-HLOS.bin
    sending 'modem' (54252 KB)...
    OKAY [ 3.671s]
    writing 'modem'...
    OKAY [ 2.330s]
    finished. total time: 6.002s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase modemst1
    erasing 'modemst1'...
    OKAY [ 0.419s]
    finished. total time: 0.419s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase modemst2
    erasing 'modemst2'...
    OKAY [ 0.419s]
    finished. total time: 0.419s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe flash fsg fsg.mbn
    sending 'fsg' (538 KB)...
    OKAY [ 0.330s]
    writing 'fsg'...
    OKAY [ 0.761s]
    finished. total time: 1.092s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase cache
    erasing 'cache'...
    OKAY [ 0.649s]
    finished. total time: 0.649s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase userdata
    erasing 'userdata'...
    OKAY [ 0.540s]
    finished. total time: 0.540s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase customize
    erasing 'customize'...
    OKAY [ 0.150s]
    finished. total time: 0.150s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe erase clogo
    erasing 'clogo'...
    OKAY [ 0.518s]
    finished. total time: 0.518s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe oem config carrier gsm
    ...
    Failed to flash config value
    OKAY [ 0.149s]
    finished. total time: 0.150s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe oem fb_mode_clear
    ...
    OKAY [ 0.148s]
    finished. total time: 0.148s

    C:\Users\ernesto\Downloads\xt1080\ADB&FastBoot_v2.56>mfastboot.exe reboot
    rebooting...

    finished. total time: 0.002s
     

    Advertisement

  2. Einsteindks

    Einsteindks Well-Known Member
    Rank:
    None
    Points:
    43
    Posts:
    157
    Joined:
    Nov 24, 2010

    Nov 24, 2010
    157
    29
    43
    Put phone in fastboot mode first, then plug it in and do the RSD thing
     
  3. evil_haxor

    evil_haxor Member
    Thread Starter
    Rank:
    None
    Points:
    26
    Posts:
    32
    Joined:
    Jul 15, 2015

    Jul 15, 2015
    32
    9
    26
    Male
    I've done that. RSDLite wont detect the device. I have the drivers installed. Anyway what would be diferent about flashing with RSDLite, doesn't it uses fastboot to flash the partitions? Thanks for your reply.
     
  4. evil_haxor

    evil_haxor Member
    Thread Starter
    Rank:
    None
    Points:
    26
    Posts:
    32
    Joined:
    Jul 15, 2015

    Jul 15, 2015
    32
    9
    26
    Male
    I selected BP Tools in bootloader menu. Now I have adb access. Tried to delete some files, this is what I get:



    shell@obake-maxx:/sdcard/dcim/Camera $ rm *
    rm *
    rm failed for IMG_20160222_223144143.jpg, Read-only file system
    255|shell@obake-maxx:/sdcard/dcim/Camera $

    In BP Tools mode various devices get detected. One of them is Motorola QC Diag Port, I installed the drivers.
    Now it shows in QPST software. QPST has a Software Download utility that is suposed to flash bootloaders,
    partitions images and whole firmware images. Does any one has any experience flashing with QPST?
     
  5. doogald

    doogald Android Expert
    Rank:
     #52
    Points:
    483
    Posts:
    6,699
    Joined:
    Jan 7, 2010

    Jan 7, 2010
    6,699
    1,930
    483
  6. Einsteindks

    Einsteindks Well-Known Member
    Rank:
    None
    Points:
    43
    Posts:
    157
    Joined:
    Nov 24, 2010

    Nov 24, 2010
    157
    29
    43
    You may need to activate the developer options from the settings menu. RSD Lite will also recognize the phone from the fastboot mode.
     

Share This Page

Loading...