1. Good things coming in just a couple hours, stay tuned!
    Dismiss Notice


Last Updated:

  1. johnnyl1111

    johnnyl1111 Well-Known Member

    anybody know how to get the mbn files out of the kdz

  2. msnuser111

    msnuser111 Well-Known Member

    Kdz files are encrypted but the .cab you can download from lg isnt, winrar and 7zip can open it but idk if it contains what youre looking for.
  3. johnnyl1111

    johnnyl1111 Well-Known Member

    i get to the .tot then i cant extract any further
  4. sammyz

    sammyz LG Whiz Kid Guide

    There are no .mbn files from our firmware.

    Each phone works differently with firmware based usually on the processor.

    My guess is that if you were trying to find a way to unlock the bootloader, at least look at similar phones.

    But yea, there are no msm8960 LG devices yet to be cracked.
  5. johnnyl1111

    johnnyl1111 Well-Known Member

    actually i'm trying to find a way to unbrick in qhsusb mode
  6. rhino889a

    rhino889a Well-Known Member

    Curious which driver do you have?
    There was a chinese flash tool i tried
    It might have worked but qhusb_dload driver i had couldnt get past the HELLO stage.
  7. johnnyl1111

    johnnyl1111 Well-Known Member

    windows update found and installed the driver. Qualcomm HS-USB QDLoader 9008
  8. johnnyl1111

    johnnyl1111 Well-Known Member

    just curious. did anybody ever ask lg support for a flash tool for hs-usb?
  9. Neeshers

    Neeshers Guest

    Last edited by a moderator: Jun 1, 2015
  10. rhino889a

    rhino889a Well-Known Member

    I asked a tech at qualcomm
    He could not give it to me and told ne maybe check xda
    Look in the bootloader thread
    There is a link to the flash tool
    You may have to take it apart to verify partitions.
    Or sinply see if your phone responds
    But actually i dont think thats the correct driver but not sure
  11. johnnyl1111

    johnnyl1111 Well-Known Member

    theres gotta be a way. lg probably uses a flash tool to do it easily. theres always jtag but until i do that i'm gonna try as many other methods as i can to try to come up with a unbrick solution.
  12. johnnyl1111

    johnnyl1111 Well-Known Member

    qpst recognizes the phone. but i dont have the right files. the lg flash tool for softbrick starts to flash if i choose odm instead of cdma but then the tool crashes.
  13. johnnyl1111

    johnnyl1111 Well-Known Member

    i was just told that lg motion is not supported by jtag. so i'm gonna keep trying for awhile and if somebody comes along that needs one for parts like the screen then i'll probably give it away.
  14. rhino889a

    rhino889a Well-Known Member

    Send it to lg
    They fixed two of mine
    I only paid 11 bucks for shipping

Share This Page