Geniatech Enjoy TV

next121 · Jul 29, 2012

You don't need to flash the Pivos firmware XBMC works on the other firmwares too, tested gio965s modded Geniatech version and Sumvision firmware.

You can force flash the Pivos firmware just like any other onto 512MB 8726M1 players but you cannot use it with 256MB 8726M1, 8726M3 or 8726MX based players.

If planning on buying an Amlogic box do get a Pivos XIOS DS where available as they helped XBMC on Android happen so it's worth supporting them for that.

Hopefully the bugs in Android that are being noted in the Pivos forums will get squashed and the fixes will go upstream to whoever makes Android for Amlogic players (I'm guessing it's actually Amlogic).

P.S. Could anyone run Nenamarkv1 on their box pretty much everyone reading this has an 8726M1, I think mine is on it's way out the GPU is really slow but I cant find any direct comparison scores so I would really appreciate if someone could run Nenamark (takes just a few seconds) and tell me the FPS they get.

Thanks.

szemo77 · Jul 29, 2012

Pivos box is rebranded ATV510 so the firmware is for all Geniatech ATV boxes; ofc with min. 512MB RAM. Just update; no need port. They use M1 not yet M3.

everst · Jul 29, 2012

thx for the info

xdvbxkaomx · Jul 30, 2012

Hello
firstly I apologize for my poor English

I want to buy Atv-3000 so I have Several questions

1- Geniatech devices really can play 1080p movies ?
2- what formats These devices will play exactly ?
3- All the following formats are Play normally with these devices ?( MTS, M2TS, TS, TP, MKV, AVI, Xvid, Divx, WMV, MPG, MOV, VOB, MP4, FLV, IFO, BD ISO/Folder, DAT, DVD ISO/Folder, RM/RMVB ) There is no any problem when playing?when playing large files are Video and audio sync ?normally can be played Films with more than 15 or 20 GB capacity ?
4- Is not it better to buy a device with a dual core chip ? The device chipset is enough strong ? Do these devices work like a xtreamer prodigy or WD TV Live Hub? (In terms of ability to play full HD videos)
5- Is Possible to change the font or install new fonts in them? I want to watch my movies with Subtitles with my favorite font.
6- These device what kind of 3D video can be play ?As far as I know the 3D film only can be broadcast from the hdmi 1.4 port , and Hdmi 1.3 port cannot be broadcast real 3D films .
7- In this devices Possible to connect them with the external DVD or BD drive ?
8- These devices have the ability to display the Farsi ( persian ) subtitles?

tanx

sebaschonfeld · Jul 30, 2012

Hi guys,
I need help!
I own a Geniatech ATV1000 and i

enviro8 · Jul 30, 2012

sebaschonfeld said:
Hi guys,
I need help!
I own a Geniatech ATV1000 and i

Saeviomage · Jul 30, 2012

Has anyone gotten a bluetooth dongle to work on the Geniatech ATV2000? What dongle was it, what update etc?

Eymerich · Jul 31, 2012

Hi the last version of Youtube doesn't work anymore with my ATV 2000 and ICS.
Any ideas?

szemo77 · Jul 31, 2012

Please use older one with better view

-> download <-
http://www.4shared.com/android/WdBrOpGH/comgoogleandroidyoutube-1.html

everst · Jul 31, 2012

on this version the HD is working?

can test someone for me the sopcast player? i instaled the player everything works perfect only the HD channels dosent work well,i have the best internet band

http://www.sopcast.com/download/ here is the player

https://play.google.com/store/apps/...t=W251bGwsMSwxLDEsImlkZXZlbC5zb3BjYXN0LmdvIl0. channel list ,there is the HBO HD

szemo77 · Jul 31, 2012

Tested on ATV1000 M1 - yes HD working.

next121 · Jul 31, 2012

xdvbxkaomx said:
Hello
firstly I apologize for my poor English

I want to buy Atv-3000 so I have Several questions

1- Geniatech devices really can play 1080p movies ?
2- what formats These devices will play exactly ?
3- All the following formats are Play normally with these devices ?( MTS, M2TS, TS, TP, MKV, AVI, Xvid, Divx, WMV, MPG, MOV, VOB, MP4, FLV, IFO, BD ISO/Folder, DAT, DVD ISO/Folder, RM/RMVB ) There is no any problem when playing?when playing large files are Video and audio sync ?normally can be played Films with more than 15 or 20 GB capacity ?
4- Is not it better to buy a device with a dual core chip ? The device chipset is enough strong ? Do these devices work like a xtreamer prodigy or WD TV Live Hub? (In terms of ability to play full HD videos)
5- Is Possible to change the font or install new fonts in them? I want to watch my movies with Subtitles with my favorite font.
6- These device what kind of 3D video can be play ?As far as I know the 3D film only can be broadcast from the hdmi 1.4 port , and Hdmi 1.3 port cannot be broadcast real 3D films .
7- In this devices Possible to connect them with the external DVD or BD drive ?
8- These devices have the ability to display the Farsi ( persian ) subtitles?

tanx

XBMC is supported on Amlogic chipsets which is what Geniatech use and takes care of playback for all media by offloading the video to VPU (video processing unit), its much better than the very basic media player supplied. Amlogic chipsets can handle Blu-ray's extracted with MakeMKV.

3D Blu-ray video is only supported on the newer Amlogic 8726-M3 or 8726-MX variants, many boxes out there are still using older 8726M1 which does not support H.264 MVC (3D Blu-ray). However I don't think XBMC supports this format yet anyway.

8726-M1 VPU supports: MPEG-1, MPEG-2, MPEG-4, MJPEG, H.264, Realvideo, VC-1.
8726-M3 & MX VPU supports : MPEG-1, MPEG-2, MPEG-4, MJPEG, H.264, H.264 MVC, Realvideo, AWS, VC-1

It's not possible to use a DVD or BD drive with these boxes.

gadg17 · Aug 1, 2012

next121 said:
You don't need to flash the Pivos firmware XBMC works on the other firmwares too, tested gio965s modded Geniatech version and Sumvision firmware.

You can force flash the Pivos firmware just like any other onto 512MB 8726M1 players but you cannot use it with 256MB 8726M1, 8726M3 or 8726MX based players.

Does anyone know if the Pivis f/w should definitely work on this box?
Spec is Cortex A9, Amlogic 8726-M1, 512MB RAM, Mali400 GPU. Model: MBX MBX DVBT reference board (c03ref).

XBMC already runs but there is sync drift on all video players, which I would hope different f/w would correct. But don't want to risk bricking it.

Thanks

Edit: Same question re Stane1983's custom f/w. Would that work on this box?

next121 · Aug 1, 2012

gadg17 said:
Does anyone know if the Pivis f/w should definitely work on this box?
Spec is Cortex A9, Amlogic 8726-M1, 512MB RAM, Mali400 GPU. Model: MBX MBX DVBT reference board (c03ref).

XBMC already runs but there is sync drift on all video players, which I would hope different f/w would correct. But don't want to risk bricking it.

Thanks

Edit: Same question re Stane1983's custom f/w. Would that work on this box?

Yeah it should flash to that but theres always a small risk. It's still very early days in the XBMC port, the Pivos firmware may not do anything to fix that.

Be aware that if you dont have a copy of the original firmware on the box then thats gone check if there are firmware updates available.

damage6654 · Aug 1, 2012

hey guys, im just wondering if any of you know where to get the atv1200 or atv1600? and how good is the quality of playback movies? also are mp4 able to play?

werewolferx · Aug 2, 2012

Currently ATV1000 with M3 is fully able to play BluRay 3D titles, I use it at home and is able to reproduce without any problem at all, there is only one thing with codecs, the RMVB codec is not able to handle all the specs and some (probably monkey type) will show kind of blurry, but still plays great.

Hope this helps to all users.

okeytheone · Aug 2, 2012

i have the Geniatech Enjoy TV ATV500, is there a way of making it default to the usb rather than the sd card all the time, when i download apps like media players, music player etc, they all want to search the sd slot rather than the usb

ragorali · Aug 2, 2012

hi i used both geniatech ics firmware and xios ics firmware. i think both firmwares are same. may be some little changes colud be on xios.

My main problem is ics firmware does not support usb blutooth dongel. old versions supoort usb bluetooth especially gio special ics firmware has bluetooth settings on the screen. i need usb bluetooth drivers for ics. can any one help? thanks...

enviro8 · Aug 2, 2012

ragorali said:
hi i used both geniatech ics firmware and xios ics firmware. i think both firmwares are same. may be some little changes colud be on xios.

My main problem is ics firmware does not support usb blutooth dongel. old versions supoort usb bluetooth especially gio special ics firmware has bluetooth settings on the screen. i need usb bluetooth drivers for ics. can any one help? thanks...

Both have the same version numbers Uboot etc.

The only difference that I could see was with the supplied apps. The xios has a separate apps update

werewolferx · Aug 3, 2012

enviro8 said:
Both have the same version numbers Uboot etc.

The only difference that I could see was with the supplied apps. The xios has a separate apps update

XIOS firmware works till some point in ATV1000, frezzes constantly with some aplications, video shows delay in sound.

avirex · Aug 3, 2012

Hi there. Does anyone know what is the latest firmware for the ATV310B which uses the newer Amlogic 8726-M3 chipset. I believe this box only supports Android 4.0 ICS. Thanks for any help.

okeytheone · Aug 3, 2012

will the airmouse work if i flash my atv310 box with the XIOS DS firmware, as the XIOS box does not come with airmouse

roobarb · Aug 3, 2012

Hello folks.
New to this forum (and site).
How can I post a thread (ask question) on this forum?
Have read the FAQ's, cannot find the button.
I have a problem regarding a recent ICS upgrade to a Sumvision Nano Slim+ and problems getting USB HDDs detected.
Odd to find I apparently have a re-branded Enjoy TV Box Nano3 ATV510B, or the pictures look similar.
Your help on either subject most appreciated.

schit · Aug 3, 2012

roobarb said:
Hello folks.
New to this forum (and site).
How can I post a thread (ask question) on this forum?
Have read the FAQ's, cannot find the button.
I have a problem regarding a recent ICS upgrade to a Sumvision Nano Slim+ and problems getting USB HDDs detected.
Odd to find I apparently have a re-branded Enjoy TV Box Nano3 ATV510B, or the pictures look similar.
Your help on either subject most appreciated.

What is the format the disk USB?

roobarb · Aug 3, 2012

Hello schit.
2 x Hdd 2TB each, both FAT32.
One HDD would not be recognised.
Tried different combinations of drive/USB port.
Finaly reverted to Gingerbread, working fine again.
Shame about the ICS as I quite liked it, hope they fix that.
Many thanks.

Geniatech Enjoy TV

Member

Well-Known Member

Well-Known Member

Lurker

Lurker

Well-Known Member

Lurker

Lurker

Well-Known Member

Well-Known Member

Well-Known Member

Member

Newbie

Member

Lurker

Newbie

Newbie

Lurker

Well-Known Member

Newbie

Member

Newbie

Newbie

Newbie

Newbie

BEST TECH IN 2023

Smartphones

Best Android Phones

Upcoming

Best iPhones

Upcoming

Tablets

Best Tablets

Upcoming

Laptops

Best Laptops

Upcoming

Televisions

Best TVs

Upcoming

Game Consoles

Best Game Consoles

Upcoming

Wearables

Best Wearables

Upcoming

Smart Home

Smart Home Tech

Upcoming

Similar threads