• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root OH CRAP I SCREWED MY PHONE UP!!! recovery guide.

1. Flash stock ec09 in odin (pda section), with pit (this will wipe)

Both at them same time?

2. After phone reboots, place ec09 deodexed on sdcard, then reboot into download mode.
3. Flash recovery in odin (pda section) no pit, and auto reboot unchecked

you mean - this: Ec09 deodexed, rooted (recovery)
http://ubuntuone.com/3qamjuePP9HeY9R8oXZea4
??

Then what do I place onto SD card? Same file?


4. After you get "pass" and "rqt closed" in dialog box, unplug.
5. Pull battery, replace, and boot into recovery.

That's where I had trouble so far, as it boots into recovery mode where power button does not work.
6. Nandroid backup, then flash ec09 deodexed.
7. Wipe dalvik and cache
 
Upvote 0
Upvote 0
not to be a prick - THANK YOU.

#1 is cwm recovery, to be flashed in odin.
#4 is a deodexed, rooted version of the Rom, to be flashed in recovery.
The part in parentheses is telling what to flash it in. And no worries. I shot you a pm with my number, if you want it
Yes, #w and #3 are placed in odin at the same time. Rom in pda and pit in pit section
Oh, and you put #4 on the sdcard
 
Upvote 0
I get it. Do Odin full recovery #1 plus #3 simultaneously
Install CWM recover via odin
place deodexed somewhere on sd card, and flash it from cwm recovery; my only concern is that, so far, power button produces no function in recovery mode and phone gets stuck in it, and I have to do over via Odin to unlock it again.
Thanks, brother. Really appreciate ph # offer, I know you, you are always helpful. Be well.
 
Upvote 0
I get it. Do Odin full recovery #1 plus #3 simultaneously
Install CWM recover via odin
place deodexed somewhere on sd card, and flash it from cwm recovery; my only concern is that, so far, power button produces no function in recovery mode and phone gets stuck in it, and I have to do over via Odin to unlock it again.
Thanks, brother. Really appreciate ph # offer, I know you, you are always helpful. Be well.

All correct, but first step is 2&3, not 1&3
 
Upvote 0
Hello,



I'm following this thread and I can't get past this problem:

"can't mount /dev/block/mmcblk0p1"

Odin has given me this:


<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I400-EC07-FROYO-REL-PRODUCTION.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Download (dwTSize :345347416)..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> cache.rfs
<ID:0/003> modem.bin
<ID:0/003> EndConnection..
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)

I've been over to XDA tried various versions : Continuum DataBase [EC09][DL17][EC03][EC07]
 
Upvote 0
Hello,



I'm following this thread and I can't get past this problem:

"can't mount /dev/block/mmcblk0p1"

Odin has given me this:


<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I400-EC07-FROYO-REL-PRODUCTION.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Download (dwTSize :345347416)..
<ID:0/003> param.lfs
<ID:0/003> Sbl.bin
<ID:0/003> boot.bin
<ID:0/003> recovery.bin
<ID:0/003> zImage
<ID:0/003> factoryfs.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> cache.rfs
<ID:0/003> modem.bin
<ID:0/003> EndConnection..
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)

I've been over to XDA tried various versions : Continuum DataBase [EC09][DL17][EC03][EC07]

Where are you getting the mounting error?
 
Upvote 0

From the looks of it, your/dbdata is corrupted. Have you tried repartitioning? If you have a corrupted block on your internal sd card, repositioning is the only way I know of to fix it.

Make sure your usb, and micro usb port are both good. Keep in mind, you will lose all data (except what is on your removable sdcard), but I'm sure that is already done, if you've flashed in Odin.

Use the files, and steps laid out a few posts up from yours (when I was helping ukroz). That will put you on the latest firmware.
 
Upvote 0
I just did

I think this phone is somehow it's corrupted and will not overwrite or wipe it' self out

I only started down this path when the phone just stopped working it was stuck on the Samsung screen

I'll re-flash again

Thx's
If that doesn't work, try same pit with the ec07 rel production.tar...
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones