• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [Boost Mobile] [Guide][How-To] Return to CWM Or Stock Recovery from TWRP

I might be off topic but I currently have TWRP installed, can I also install CWM and have dual recovery? If so, do I just flash the CWM? Step by step instruction would be awesome! :)

Nope! You're only allowed to have one at this time.
Theoretically its possible to run a dual boot system, I would assume you could do the same for recovery, but there are not many benefits. It would be easier to just flash back and forth between cwm and twrp
 
  • Like
Reactions: freesunshine
Upvote 0
Hi everyone, I will admit I have went over my noob experience threshold here... And this is kinda a long drawn out series of bad events. I installed the TWRP root onto my ZTE Warp, even tho I haven't a clue what to use it for. Well, yesterday, my charge port broke, so I cut the micro usb end off the charger and charged the battery straight wired. This morning, all was cool. I was texting, online, and made calls. I ALSO attempted to use the car charger on the broken port. I got it charging after many wiggles and pushing on the plug. Once I arrived at work, I tried to usse my Warp, only to find it frozen. Normal, I thought, and pulled the battery. Thirty mins later, I tried again, still froze. I tried everyything and still can't use the touch screen. Now during all this, I had removed my sd card to try a reset. And by doing this, I unfortuantly, have lost the sd card... And discovered when trying to reset with twrp, I need the touch screen, but its still froze.... PlZZZZ.... Is there anything I can do here? Thanks in advance!
 
Upvote 0
Hi!
I was wanting to install the cwm over my twrp but when i flashed your recover.zip file it didnt install cwm... instead when i rebooted to the system my phone was working very slowly, i cant open apps or pull down the notification bar cause it freezes, same happens when i try to shut down or reboot and after a while there is a message telling me that trebuchet stopped working... this happens every time... i have tried many things but i cant solve this problem... now i have even succesfully flashed cwm over the old twrp but the problem persists.

I love my phone and went thrugh a lot to buy it (imported it) so please help me fixing it...

Its a Samsung Galaxy SII Skyrocket running on CM10 stable version...

PLEASE HELP ME!!!!!!
Thanks
 
Upvote 0
Hi!
I was wanting to install the cwm over my twrp but when i flashed your recover.zip file it didnt install cwm... instead when i rebooted to the system my phone was working very slowly, i cant open apps or pull down the notification bar cause it freezes, same happens when i try to shut down or reboot and after a while there is a message telling me that trebuchet stopped working... this happens every time... i have tried many things but i cant solve this problem... now i have even succesfully flashed cwm over the old twrp but the problem persists.

I love my phone and went thrugh a lot to buy it (imported it) so please help me fixing it...

Its a Samsung Galaxy SII Skyrocket running on CM10 stable version...

PLEASE HELP ME!!!!!!
Thanks

These methods and zips are for the ZTE Warp only. And sounds like you got lucky, you could have bricked your phone flashing files for another phone.
I would do a reflash of twrp recovery for your SGSII, then a from reflash just to stay on the safe side.

Be careful what files you flash, flash the wrong one and you end up with a very expensive paperweight or door stopper :eek:
 
  • Like
Reactions: loquesea
Upvote 0
These methods and zips are for the ZTE Warp only. And sounds like you got lucky, you could have bricked your phone flashing files for another phone.
I would do a reflash of twrp recovery for your SGSII, then a from reflash just to stay on the safe side.

Be careful what files you flash, flash the wrong one and you end up with a very expensive paperweight or door stopper :eek:

Thank you so very much!! :)
one last question tough: how should i reflash twrp?? should i use ODIN or do it with my now newly installed cwm??
Thanks
 
Upvote 0
Thank you so very much!! :)
one last question tough: how should i reflash twrp?? should i use ODIN or do it with my now newly installed cwm??
Thanks

judging by what you said you did, you should reinstall the original firmware for your phone and reinstall cm10 after... the reason i say this is because different phones use different partitions for recovery, boot, system, radio, cache, etc.. and it sounds like when you flashed cwm using this tool , you deleted something you needed in one of the background partitions. TWRP in my opinion is a better recovery anyways. if your lucky, the cwm recovery you flashed was flashed to the cache partition and you can go to the wipe section of twrp and wipe cache and dalvik to solve the glitchiness in your phone... good luck and always flash compatible software( only things for your gs2) :)
 
  • Like
Reactions: loquesea
Upvote 0
judging by what you said you did, you should reinstall the original firmware for your phone and reinstall cm10 after... the reason i say this is because different phones use different partitions for recovery, boot, system, radio, cache, etc.. and it sounds like when you flashed cwm using this tool , you deleted something you needed in one of the background partitions. TWRP in my opinion is a better recovery anyways. if your lucky, the cwm recovery you flashed was flashed to the cache partition and you can go to the wipe section of twrp and wipe cache and dalvik to solve the glitchiness in your phone... good luck and always flash compatible software( only things for your gs2) :)

i have already made a factory reset.. does that not include a cache + dalvik wipe??
 
  • Like
Reactions: LilBit
Upvote 0
It wooooooooooooooooooooorked!!!!
My phone came back from the dead and I am soooooo happy!!!
What I did:
Flashed Gingerbread Stock Firmaware with Odin. After it was successfully flashed the phone rebooted on its own. The att "rethink possible" logo appeared and after a while it went away but the same animation with the same logo loaded itself again... this happen millions of times (for about an hour) and it never loaded the OS. When I tried to turn it off it wouldnt let me but finally made it somehow... then I manually entered stock recovery mode made a factory reset and cahe partition wipe as well, rebooted the phone and it worked!
I am really glad it worked and couldnt be happier. Thank you very much everybody for helping me out!
 
Upvote 0
Alright, for those that want to return to CWM Recovery from TWRP Here's the scoop...

1. Download recover.zip
2. Place recover.zip on your SD Card
3. Boot into TWRP Recovery
4. Tap on Install
5. Find recover.zip file on your SD card.
6. Slide to Flash
7. Reboot System & Enjoy CWM Again!

-- I was experimenting with various roms and ended up installing Carbon Rom for XPeria S, now i want to go back to Existenz Rom of niaboc97, but I cant as I had made the backup with CWM 6.0.4.3 and i am not able to go back to CWM now. Stuck in TWRP.

Please help.
 
Upvote 0
Alright, for those that want to return to CWM Recovery from TWRP Here's the scoop...

1. Download recover.zip
2. Place recover.zip on your SD Card
3. Boot into TWRP Recovery
4. Tap on Install
5. Find recover.zip file on your SD card.
6. Slide to Flash
7. Reboot System & Enjoy CWM Again!

~~~~~~~~~~~~~~~~~~~~~~~

Return To Stock Recovery

1. Download StockRecovery.zip
2. Place StockRecovery.zip on your SD Card
3. Boot into TWRP Recovery
4. Tap on Install
5. Find StockRecovery.zip file on your SD card.
6. Slide to Flash
7. Reboot System & Enjoy Stock Recovery Again!

Thanks to StarScream2109 for helping me figure it out exactly, and hraork13 for his template installer!
Plz re up cwm recovery zip thx
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones