[KERNEL] RebelKernel by RebelLion

RebelLion · Feb 4, 2019

Introducing RebelKernel for all variants of the Moto E4 'perry' device. Upstreamed to the latest linux-stable 3.18 tag and loaded with features and optimizations. The aim of this kernel is to make the User Experience as smooth and efficient as possible, while also bringing in features like DoubleTap2Wake (DT2W), KCAL (advanced color control processing), and USB OTG that help bring this budget phone on par with mid-end devices.

A lot of testing has been done to get this kernel stable, however there is always a chance that flashing this kernel could leave something not working correctly. Please take logs (dmesg and ramoops) in this event and send them to me.

Features:
* Linux-stable: 3.18.63 -> 3.18.134
* F2FS Loopback Bug patched
* LZ4 Compression
* CPU Input Boost driver
* KCAL color control driver
* DT2W driver
* Boeffla Wakelock Blocker driver
* Wireguard Support
* XPad Rumble and LED support
* USB OTG Native support
* USB HID Keyboard support
* MHL HDMI support
* Cmdline flags removed to pass SafetyNet
* Toolchain: GCC 4.9.4 --> Linaro 7.4.1
* I/O Schedulers: Zen, Maple
* Governors: Electron, Zzmoove, Lionfish
* Hotplugs: Alucard
* GPU: Adreno Idler, Adreno Boost
* TCP: Westwood
* FSync On/Off
* Swappiness: 15
* VFS Cache Pressure: 10
* Drastically reduced logging overhead and spam
* Migrated many workqueues to Power Efficient WQs

Installation:

1) BACKUP. Always have a recent system backup when flashing anything.
2) Download the zip from the link below and flash from TWRP.
3) If you get bootloops or issues, please take kernel logs and logcats (if booted) and report back so I can address the issue.

Please give feedback. A lot of work is being put into this kernel so I hope it improves your experience.

Download:
Version: 2.1
https://mega.nz/#!A3R22QBI!j_z-LNNzIQtKyYdcHbEUNrbzws2-gggf_-IEqvyfrn0

Changes:
* Added MHL HDMI driver support

Source:
* Branch 'rebel'
https://github.com/RebelLion420/kernel_perry

Credits:
@squid2
@facuarmo
@jasonmerc

*** While donating is not required to use my work, it is certainly appreciated. Thanks in advance!
https://paypal.me/rebelliouslion

Hikari Asagiri · Feb 5, 2019

Before i go ahead to test, will this work with xt1768 (unlocked variant)

bcrichster · Feb 5, 2019

Hikari Asagiri said:
Before i go ahead to test, will this work with xt1768 (unlocked variant)

Do you have working TWRP & Root? If so, you can just try it or restore a backup if ya don't like it

RebelLion · Feb 5, 2019

Hikari Asagiri said:
Before i go ahead to test, will this work with xt1768 (unlocked variant)

'for ALL variants of the Moto E4' I'm pretty positive this will work with your device. But like bcrichster said, always have a backup just in case.

Hikari Asagiri · Feb 5, 2019

Yup i have TWRP and and root, also why do my eyes always skip over the smallest things.. Thanks both of you ^^ guess I'mma flash and test over the next couple days

RebelLion · Feb 12, 2019

New Version in OP!
2.0

Changelog:
* Upgraded toolchain to 7.4.1, slight improvement to performance and stability
* Upstreamed to current latest Linux-stable version 3.18.134
* Loads of minor fixes and tweaks to various drivers, modules, and filesystems for slight improvements to performance stability, and power efficiency. Credits to FacuM on github for finds

RebelLion · Feb 14, 2019

New Version Released
2.1

Changelog:

Introduced init.rebel.rc, borrowed from @frap129's Electron Kernel. This tunes some of the kernel settings on boot to recommended values. First version, will be tested and/or modified

Modified fstab to enable Native USB OTG (hopefully). This needs to be tested as I am not able to at the moment

Hikari Asagiri · Feb 15, 2019

Been using the 1.1 version from telegram and I've noticed way better performance and battery life overall, will keep testing your new releases for sure

RebelLion · Feb 20, 2019

New Version Released
2.2

Changelog:

Added USB HID Keyboard support to use phone as an external keyboard

DaRkSkYxP · Feb 26, 2019

The download link is not working for me for the latest v2.2. I am only on v1 because that's all I can find a link for. The link here is the same as on xda. I found your git but I don't really want to compile from source. Thanks for your work by the way

RebelLion · Feb 26, 2019

DaRkSkYxP said:
The download link is not working for me for the latest v2.2. I am only on v1 because that's all I can find a link for. The link here is the same as on xda. I found your git but I don't really want to compile from source. Thanks for your work by the way

I've gotta get better with these links, I apologize. Its up now

DaRkSkYxP · Feb 26, 2019

RebelLion said:
I've gotta get better with these links, I apologize. Its up now

Thanks. Just to let you know xda only has up to v1. I have to charge my phone some and then I will flash it I have noticed battery life issues with v1 but hopefully they have been fixed

Hikari Asagiri · Feb 27, 2019

Flashing v2.2 only gave me constant bootloops, had to revert back to 2.1 to get my phone working again.. On stock rom atm, pretty weird

Only issue i've had with it so far is that ^ been getting a lot better performance and battery life on v2.1 tho, good work <3

RebelLion · Mar 3, 2019

DaRkSkYxP said:
Thanks. Just to let you know xda only has up to v1. I have to charge my phone some and then I will flash it I have noticed battery life issues with v1 but hopefully they have been fixed

Yeah that's for a reason, XDA had been giving some devs I know a hard time so I don't stay active on there anymore.

Hikari Asagiri said:
Flashing v2.2 only gave me constant bootloops, had to revert back to 2.1 to get my phone working again.. On stock rom atm, pretty weird

Only issue i've had with it so far is that ^ been getting a lot better performance and battery life on v2.1 tho, good work <3

Would you be able to get a log of that bootloop? Right after it loops to the black screen BEFORE the logo, boot it to TWRP and grab the console-ramoops from /sys/fs/pstore/ in the File Manager in Advanced.

P. S. You might have to count how long till it bootloops and then time the key combo right (VOL DOWN + PWR)

Hikari Asagiri · Mar 6, 2019

RebelLion said:
Yeah that's for a reason, XDA had been giving some devs I know a hard time so I don't stay active on there anymore.

Would you be able to get a log of that bootloop? Right after it loops to the black screen BEFORE the logo, boot it to TWRP and grab the console-ramoops from /sys/fs/pstore/ in the File Manager in Advanced.

P. S. You might have to count how long till it bootloops and then time the key combo right (VOL DOWN + PWR)

Here you go https://pastebin.com/ubyKfJLu (hope i did it right)

RebelLion · Mar 7, 2019

Hikari Asagiri said:
Here you go https://pastebin.com/ubyKfJLu (hope i did it right)

Yes, thank you. Upon first skimming through and searching keywords all I can find is some issues with the pinctrl, which I have no idea about (yet). And I haven't seen this before so it may be specific to your device and setup. I'll see what I can find

DaRkSkYxP · Mar 8, 2019

I noticed that under settings and about phone it says kernel 2.1. I flashed 2.2 though. I am not sure if it's a typo or not so I thought I would check. Also I can't seem to get out of usb charging mode and into mtp or USB mass storage mode. When I run a USB mass storage enabler app it says that my kernel does not have the drivers to support it. I also tried using drive Droid and I can't get it to change the USB mode either by trying different options manually. Twrp mtp works without a problem so I know it's not my cable or driver's in windows 10. When I try to change the USB mode from charging to anything else settings crashes on me. I think I might just do a backup with twrp and start over with a clean install and not run any tweak apps or scripts and see if it works. I took a snapshot of some of my device info from settings > about. Drive Droid is an awesome app and I would like to use it so I can have some bootable pc repair isos on hand if I need them. Also I have been thinking about making a usb otg cable that can also power a alfa USB wifi adapter I have for use with kali nethunter. Magisk looks like it has the drivers and stuff for that though. It is probably not your kernel but I just thought I would let you know in case it is. Thanks for your work again.

RebelLion · Mar 9, 2019

DaRkSkYxP said:
I noticed that under settings and about phone it says kernel 2.1. I flashed 2.2 though. I am not sure if it's a typo or not so I thought I would check. Also I can't seem to get out of usb charging mode and into mtp or USB mass storage mode. When I run a USB mass storage enabler app it says that my kernel does not have the drivers to support it. I also tried using drive Droid and I can't get it to change the USB mode either by trying different options manually. Twrp mtp works without a problem so I know it's not my cable or driver's in windows 10. When I try to change the USB mode from charging to anything else settings crashes on me. I think I might just do a backup with twrp and start over with a clean install and not run any tweak apps or scripts and see if it works. I took a snapshot of some of my device info from settings &amp;gt; about. Drive Droid is an awesome app and I would like to use it so I can have some bootable pc repair isos on hand if I need them. Also I have been thinking about making a usb otg cable that can also power a alfa USB wifi adapter I have for use with kali nethunter. Magisk looks like it has the drivers and stuff for that though. It is probably not your kernel but I just thought I would let you know in case it is. Thanks for your work again. View attachment 140288

As for the typo, I did re-upload 2.2 fixing that typo as I forgot to increment the version lol. As for your OTG issue, that may be the fstab I modified not letting you. I had some people saying OTG works, others saying it didn't so I tried to modify it myself based on others who did the same. I'm working on a newer version that addresses these issues and will post it soon

Deleted User · Mar 14, 2019

@RebelLion does this work on the crDroid I made? If so I'm gonna link to this in my thread over there

RebelLion · Mar 14, 2019

jasonmerc said:
@RebelLion does this work on the crDroid I made? If so I'm gonna link to this in my thread over there

It definitely should, I don't see why not. I might change the link to a lower version so there is no issues, some users reported issues with the newest one

DaRkSkYxP · Mar 27, 2019

Any chance of obtaining a download link for a flashable v2.4?

RebelLion · Mar 28, 2019

DaRkSkYxP said:
Any chance of obtaining a download link for a flashable v2.4?

I'm still ironing out the issues with the latest version. I have the link up rn for the most curent stable version

DaRkSkYxP · Apr 29, 2019

I was just wondering if you are still working on this. It would be cool to have kernel support for using otg with USB wifi adapters that support wireless injection. Magisk has firmware support for the supported cards but I think the kernel needs to have some things in it as well from what I have gathered.

Hikari Asagiri · May 7, 2019

Download link dead?

noyd · May 10, 2019

Can someone please post a working link to the kernel .zip? Thank you. The OP's link on mega doesn't work, and I could really use the kernel.

[KERNEL] RebelKernel by RebelLion

Newbie

Newbie

ROMinator

Newbie

Newbie

Newbie

Newbie

Newbie

Newbie

Android Enthusiast

Newbie

Android Enthusiast

Newbie

Newbie

Newbie

Newbie

Android Enthusiast

Newbie

Deleted User

Guest

Newbie

Android Enthusiast

Newbie

Android Enthusiast

Newbie

Lurker

BEST TECH IN 2023

Smartphones

Best Android Phones

Upcoming

Best iPhones

Upcoming

Tablets

Best Tablets

Upcoming

Laptops

Best Laptops

Upcoming

Televisions

Best TVs

Upcoming

Game Consoles

Best Game Consoles

Upcoming

Wearables

Best Wearables

Upcoming

Smart Home

Smart Home Tech

Upcoming

Similar threads