1. Are you ready for the Galaxy S20? Here is everything we know so far!

lg g7 thinq Set device unlocked! failed: 00000050

Discussion in 'Android Devices' started by mayconz, Apr 24, 2021.

  1. mayconz

    mayconz Lurker
    Thread Starter

    Hi,

    im trying to unlock the bootloeader of my lg g7, im follwing this steps here

    https://forum.xda-developers.com/t/...y-g7-thinq-except-g710tm-with-photos.4168771/

    but now im stuck in the step 19 when i type fastboot oem unlock i can get 3 results

    FAILED (remote: 'unknown command')
    FAILED (remote: ' Set device unlocked! failed: 00000050')
    FAILED (remote: ' Device already : unlocked!') (it says its unlocked but in my screen it show that is locked)

    "fastboot devices" works, it shows my device
    "fastboot oem device-info" also works, it shows:

    (bootloader) Verity mode: true
    (bootloader) Device unlocked: false
    (bootloader) Device critical unlocked: false
    (bootloader) Charger screen enabled: false
    OKAY [ 0.005s]
    Finished. Total time: 0.005s

    fastboot oem device-id: doesnt work
    fastboot oem unlock: doesnt work

    btw, this tutorial of xda developers is the same of this youtuber here



    my device model is g710emw

    can somebody help me with this?
     



    1. Download the Forums for Android™ app!


      Download

       
  2. ocnbrze

    ocnbrze DON'T PANIC!!!!!!!!!

    can you post the entire command and it's output?
     
  3. mayconz

    mayconz Lurker
    Thread Starter

    here, 3 attempts, you can see the results

    the waiting for device appeared because the device wasn't connected when i typed the command.

    upload_2021-4-24_19-51-50.png
     
    ocnbrze likes this.
  4. ocnbrze

    ocnbrze DON'T PANIC!!!!!!!!!

    your last ccommand entry seemed close to what it says in the guide:
    try using usb 2.0 and keep trying
     
    #4 ocnbrze, Apr 24, 2021
    Last edited: Apr 24, 2021
  5. mayconz

    mayconz Lurker
    Thread Starter

    Hi, im already using the 2.0 usb port, nothing changes
     
  6. ocnbrze

    ocnbrze DON'T PANIC!!!!!!!!!

    have you tried it until the output changes. it does say to keep trying until it does.
     
  7. mayconz

    mayconz Lurker
    Thread Starter

    yes, i gave it a lot of tries, i tried more than 50 times, even changing to another usb 2.0 port, but again the same results.
     
  8. ocnbrze

    ocnbrze DON'T PANIC!!!!!!!!!

    maybe try a different cable.
     
  9. mayconz

    mayconz Lurker
    Thread Starter

    i tried with 3 cables, the original, the lg g pad cable and another good quality cable that i have, same thing
     
  10. mayconz

    mayconz Lurker
    Thread Starter

    well, i disconnected my printer and speaker to use another usb 2.0 port, in the speaker port, im having this response

    FAILED (Write to device failed (no link))
    fastboot: error: Command failed

    anyway, still doesnt work.

    edit

    this message is shown even if you disconnect the phone, seems like a bug, it was needed to restart the pc for this message stop to show up
     
    #10 mayconz, Apr 25, 2021
    Last edited: Apr 25, 2021
    ocnbrze likes this.
  11. ocnbrze

    ocnbrze DON'T PANIC!!!!!!!!!

    yeah i'm all out of ideas except for maybe a different computer.....maybe try posting in that thread over at xda and see if anybody will respond there.
     
  12. mayconz

    mayconz Lurker
    Thread Starter

    well, actually i have a thread there too, but, it seems like the community for this phone is not that big anyway im still waiting for a miracle lol
     
    #12 mayconz, Apr 25, 2021
    Last edited: Apr 25, 2021
    ocnbrze likes this.
  13. ocnbrze

    ocnbrze DON'T PANIC!!!!!!!!!

    i would post in the thread i linked you to earlier as well.
     
    mikedt likes this.
  14. mayconz

    mayconz Lurker
    Thread Starter

    actually its in that thread.
     
    ocnbrze likes this.
  15. mayconz

    mayconz Lurker
    Thread Starter

    Yes, im back,

    its been a few weeks trying to solve this but finally got a solution

    here is what i did

    execute the fastboot oem unlock with the unplugged phone

    the prompt will show <waiting for any device>

    restart your phone using the "Restart Bootloader", right after the screen turn black, plug the phone on usb 2.0
    and it will work, at least worked for me.
     
    ocnbrze and mikedt like this.

LG G7 ThinQ Forum

The LG G7 ThinQ release date was May 2018. Features and Specs include a 6.1" inch screen, 16MP camera, 4/6GB RAM, Snapdragon 845 processor, and 3000mAh battery.

May 2018
Release Date
0
Reviews
Loading...

Share This Page

Loading...