1. Are you ready for the Galaxy S20? Here is everything we know so far!

[SOLVED] ZTE Warp Sync DIAG mode ?

Discussion in 'Android Devices' started by hitesh123, Jan 14, 2016.

  1. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    Hi,
    Thinking of updating my Moto G to Warp Sync.
    Wanted to know about DIAG mode.
    Anyone got DIAG mode working on this phone, is it same as Zte speed from boost ?
    Please confirm, as without DIAG mode working and phone accepting data written to phone, I won't be able to use it.
    Thanks in advance.
     



    1. Download the Forums for Android™ app!


      Download

       
  2. bcrichster

    bcrichster ROMinator
    Moderator

    Are you asking if the system is write protected?
     
  3. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    NV items thru DFS or CDMA Workshop.
     
  4. devilschild26

    devilschild26 Android Expert

    U can't compare speed with the sync
     
  5. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    I am not comparing as a specs, just a way speed gives access to write NV items, is it same for warp sync ?
     
  6. devilschild26

    devilschild26 Android Expert

    Not sure i know the sync gots tons of custom ROMs
     
  7. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    Yes, I can see custom rom for warp sync, and specs are also OK for me
    So wanted to switch over, but as I am not on boost need this small tweak to make it run on my carrier.
    Hope some one can test it for me.
     
  8. devilschild26

    devilschild26 Android Expert

    Go with boost much better and get the sync u won't regret it nice device thanks to @SuperR and @phenomx4 for making it happen
     
    bcrichster likes this.
  9. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    I am not in US to get boost, I know superR from moto G he is a gr8 guy.
    Using his stock zip rom on moto G
     
  10. devilschild26

    devilschild26 Android Expert

    Oh
     
  11. bcrichster

    bcrichster ROMinator
    Moderator

    Normally, ppl manually pull the modem.images from a device set to their preferred network then flash it to the new device you need working.. I think that's what we've been doing [emoji41]
     
  12. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    That's the way to brick your device.

    One device modem img won't support to different make or model.

    Using DFS or CW we read few network parameters from one phone and put it on another. To do this we need to put phone in diagnostic mode.(DIAG)

    Normally parameters are predefined, and just need to put PRL and data setting on non carrier phone.

    And now a days just making it ruim only serves the purpose for my carrier, as they have RUIM (CDMA sim cards).

    Anyhow got a good deal on eBay.com just 69.99 including shipping to my country.
    Will try it my self.
     
  13. bcrichster

    bcrichster ROMinator
    Moderator

    I do know that there are a bunch of hidden dialer codes and stuff..
     
  14. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    ##3424# is default dialer code for most of CDMA device to put on DIAG, but now a days it ask for MSL/spc
    There is no way to read this from Zte, so will put phone on boost virtually and get spc code for manual activation on boost.
     
  15. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    Any one willing to try ?
     
  16. bcrichster

    bcrichster ROMinator
    Moderator

    Yep, asks for MSL. [emoji41]
     
  17. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    Do you have your phone's MSL ?
     
  18. bcrichster

    bcrichster ROMinator
    Moderator

    Nope. Not this one. Haven't needed to, this time around
     
  19. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    OK, thanks
    So first step is thru to open DIAG mode if spc/msl is available.
     
  20. bcrichster

    bcrichster ROMinator
    Moderator

    It looks like it..there's a bunch of dialer codes.. I even set mine to some European WCDMA until I manually switched it. Anything is possible
     
  21. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    Dialer code is one part, writing PRL is another. Now as I had already order will wait till it get delivered.
     
  22. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    It is going to be long 15days wait for me
     
    #22 hitesh123, Jan 16, 2016
    Last edited: Jan 16, 2016
  23. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    got the delivery !!
    phone feels good in hand.
    Got MSL thru Boost activation.
    Phone is on B05... will it root ?

    Update - Its rooted now, TWRP done, FOTAKill done. wish me luck for flashing it to my network !!
     
    #23 hitesh123, Jan 28, 2016
    Last edited: Jan 28, 2016
    bcrichster likes this.
  24. hitesh123

    hitesh123 Android Enthusiast
    Thread Starter

    I am on my network with Zte Wrap sync !!
    Thanks everyone for help !!
     
  25. bcrichster

    bcrichster ROMinator
    Moderator

    Which network?
     

ZTE Warp Sync Forum

Features and specs are not yet known.

unknown
Release Date
0
Reviews
Loading...

Share This Page

Loading...