Root {Port} Galaxy for the BeHold 2 123 install done right

[paul89]

Yeah when i downloaded the file i clicked open instead of save and when winzip opened up i clicked extract to removable disk which is my phone sd card

I believe adb shell, then adb devices to se if you phone is seen by the computer then type the commands

 

[Euro101]

I believe adb shell, then adb devices to se if you phone is seen by the computer then type the commands

when i type adb shell once i open up command prompt. it says adb is not recognized as an internal or external command

would i need to type cd c:\android-sdk-windows\tools before i start anything?

 

[BH_MAN]

Have a Half/breed coming in about an Hour.... Everything working on it

 

[tritran18518]

@euro101:
1. make sure u installed android sdk
2. extract file zip u downloaded in this topic, then u got 3 files, put them into sdcard
3. in your comupter => start menu=>search => type "cmd"=> type "adb devices" , if your phone name appears , then you can go ahead with those command above ( just copy and paste one at a time)

 

[paul89]

Have a Half/breed coming in about an Hour.... Everything working on it

everything! everything? Hey when I unzip the folder do I put the files on my phone individually or do I keep them in the folder?

 

[BH_MAN]

when i type adb shell once i open up command prompt. it says adb is not recognized as an internal or external command

would i need to type cd c:\android-sdk-windows\tools before i start anything?

If you have ADB setup and working on your Computer then Likely the settings are not turned on Phone....

Enable USB debugging in setting... Also you need to Have Samsung PC Studio enabled as well.

 

[BH_MAN]

everything! everything? Hey when I unzip the folder do I put the files on my phone individually or do I keep them in the folder?

You need them individually on the Root of the /sdcard

And yes everything is working, but like I said, it's a Half breed

 

[Euro101]

@euro101:
1. make sure u installed android sdk
2. extract file zip u downloaded in this topic, then u got 3 files, put them into sdcard
3. in your comupter => start menu=>search => type "cmd"=> type "adb devices" , if your phone name appears , then you can go ahead with those command above ( just copy and paste one at a time)

P/s: i cannot type , there is no keyboard

like i said before, for some reason when i type adb devices it says adb is not recognized as an internal or external command.

when i type this cd c:\android-sdk-windows\tools, and THEN type adb devices, it shows me my device 0.o. Not sure of what to do.

 

[Euro101]

If you have ADB setup and working on your Computer then Likely the settings are not turned on Phone....

Enable USB debugging in setting... Also you need to Have Samsung PC Studio enabled as well.

usb debuggins is enabled already and samsung pc studio is activated already.

 

[paul89]

usb debuggins is enabled already and samsung pc studio is activated already.

YouTube - How To Install ADB For Android (HD)

watch the whole video above, I bet there is a step in there that you are missing, it has to do with going into you environmental variables under computer properties.

 

[paul89]

You need them individually on the Root of the /sdcard

And yes everything is working, but like I said, it's a Half breed

is this half breed without TWz IU?

 

[Euro101]

YouTube - How To Install ADB For Android (HD)

watch the whole video above, I bet there is a step in there that you are missing, it has to do with going into you environmental variables under computer properties.

thanks a million im gonna try it again. I did do something wrong i set up the path wrong. I made a new path instead of fixing the original PATH on my system.

 

[Euro101]

So i think i did it correct and im rebooting my phone but it has stayed at the "Samsung" start up for a rather long time. Is this normal?

 

[paul89]

So i think i did it correct and im rebooting my phone but it has stayed at the "Samsung" start up for a rather long time. Is this normal?

any longer than 15 minutes is too long

 

[Kibbles]

So i think i did it correct and im rebooting my phone but it has stayed at the "Samsung" start up for a rather long time. Is this normal?

I JUST got the same loading screen.. was working fine for a bit.. restarted and everything. Was in a call with gf... randomly rebooted and now stuck at "Samsung" screen. Was working awesome though very smooth.. up until that point.

Regards,

~K

 

[paul89]

did you guys remember to factory restore?

 

[Kibbles]

did you guys remember to factory restore?

Yep. Sure did.. Gonna retry and see what happens.

~K

 

[BH_MAN]

is this half breed without TWz IU?

Yeah, sure is.. But making a few Fixes and Removing the Bloat ware as well.

 

[Euro101]

got it to work! its extremely fast!

can anyone get me a link on how to go back to the behold 2 firmware? i want to go back to it now to see the new update coming soon. If it sucks then i will go back to galaxy, at least now i know how to do it =)

 

[paul89]

got it to work! its extremely fast!

can anyone get me a link on how to go back to the behold 2 firmware? i want to go back to it now to see the new update coming soon. If it sucks then i will go back to galaxy, at least now i know how to do it =)

How to Undo/return to the original firmware

If you want to undo this you need to use odin to flash the original
files. You can find tuorials in alot of places. The Flash files
you'll need are here:
http://shrunk.me/uvij6.zip

 

[tritran18518]

i'm waiting for vibrate fix, and camera app from behold2.

 

[Euro101]

How to Undo/return to the original firmware

If you want to undo this you need to use odin to flash the original
files. You can find tuorials in alot of places. The Flash files
you'll need are here:
http://shrunk.me/uvij6.zip

thanks man youve been great help. Im not going to go back to the behold 2 till i see what people are saying about the new update. This galaxy firmware is the shiiiiitt.

Only thing missing is the vibrate and the behold 2 camera. =( ugh

 

[tritran18518]

does anyone know how many ram do we have with BH_man's rom ?

 

[paul89]

BH_MAN is making a hybrid rom that is just as fast and has EVERYTHING working?

 

[paul89]

does anyone know how many ram do we have with BH_man's rom ?

its about 155 mb free after a fresh reboot, with non important apps killed, then after running for a while, its about 140mb, which is freaking awesome!