KT-SGS4 Kernel


  1. ironass

    ironass Well-Known Member

    That's a blooming relief for me... and probably your long suffering wife as well! :girlhit:

    Taken from the Download...

    "AOSP KITKAT 4.4 VERSION:
    http://ktoonsez.jonathanjsimon.com/s...01.13.2014.zip

    Google Edition KITKAT 4.4 VERSION:
    http://ktoonsez.jonathanjsimon.com/s...01.13.2014.zip
    "

    There's only 2 choices for Android 4.4 Syd... go for the one that isn't AOSP. :listen:
  2. Hawker

    Hawker Well-Known Member

    I've asked the question on the thread anyway Syd.
    See if we get an explanation.....
    Sydney99 likes this.
  3. Sydney99

    Sydney99 Well-Known Member

    at least someone round here takes me seriously

    have you tried it yet then uncle rusty bum??
  4. ironass

    ironass Well-Known Member

    50/50 chance of a reply then. :rolleyes:

    My guess would be that the TW prefix is to distinguish the pure GE kernel for the GT-i9505G, from the adapted Google Edition version for the GT-i9505.

    Guess 2 would be that ktoonsez screwed up on the file name.


    We're humouring you Syd. ;)

    All done and dusted and the new super-conservative enabled and a nandroid backup done.

    On a side note... I cannot now, watch any of the Ice Age cartoons without thinking about Syd. I am seeking treatment for this. :shot:
  5. dynomot

    dynomot VIP Member VIP Member

    I always think of Ice age when I think of you three Ironass =Manny
    Hawker =Diego
    Syd=well, Syd.

    Anyways, I'm here to torment you and popped across from the Hobbit Tablet forum to ask people who are into rooting a question. Some of these kernels have Note 3 versions. Which ones are your favourites so far? I realise what is good on the Samsung flagship may not be the same on its Hobbit toy, but hey I need an excuse from trying to explain Knox from angry Note 3 owners, convinced their phone is going to die upon rooting.
  6. ironass

    ironass Well-Known Member

    I was PM'd by one poster who said almost the same thing... except their order was...

    Syd = Sid (because he was, well... Sid)
    Hawker = Manny (because he was wise, knowledgeable and patient)
    ironass = Diego (because I could be sarcastic and scathing)

    Needless to say, they're still awaiting a reply from me!

    I was a big fan of the talexop kernel on 4.3, in preference to Ausdim, faux123 or KT. However, KT on the Android 4.4 release is serving me well, better than Alucard.
    dynomot likes this.
  7. Hawker

    Hawker Well-Known Member


    Read this post, excusing all the jizz

    [​IMG]
    volimte21, ironass and Sydney99 like this.
  8. Sydney99

    Sydney99 Well-Known Member

  9. Sydney99

    Sydney99 Well-Known Member

    Having problems with k tweaker. Every time I select the supply at boot option, no matter what changes I make, my phone won't boot 4 times out of 5. Odd!
  10. ironass

    ironass Well-Known Member

    All tickety-boo here on KTweaker and my own Battery Save Profile. Try using Hawker's KernelWipe, after first saving any KTweak profiles you use, to see if that helps. If not, it could be your KTweak profile that's causing the problem. Try it on the Default profile first.
  11. Hawker

    Hawker Well-Known Member

    Ktweaker app doing great for me syd so
    try clearing ktweaker cache+data and remove ktweaker entry in the supersu app and reboot, then configure ktweaker again.

    I think I just won the "how many times can you use the word ktweaker in a single sentence" competition.

    Kernelwipe will remove all your profiles, so save them somewhere else first. They are in /sdcard/KTweaker
  12. ironass

    ironass Well-Known Member

    ktoonsez kernels for 4.2.2, 4.3, 4.4.*, for Touchwiz, AOSP and Google Edition, ROMs, updated! :)

    "Change Log 01.17.2014
    1. KTweaker: New feature by request from someone (can't remember who) to set a password to get into the UI (Under Extras - > UI Password). Feature is disabled by default leaving password blank.
    2. KTweaker: New feature to control the LEDs for notifications derived from vladnosferatu and invano implementation + some extras (see next 9 items)
    3. KTweaker: LED Fade Mode - lets you choose to use the fade effect of LED
    4. KTweaker: LED Fade Intensity - lets you choose the light intensity of the LED
    5. KTweaker: LED Time on - lets you override the ROMs setting for how long the the LED stays ON
    6. KTweaker: LED Time off - lets you override the ROMs setting for how long the the LED stays OFF
    7. KTweaker: LED Step Speed 1 - lets you control the steps it takes as it makes the LED brighter/dimmer when in fade mode, play around with it and have fun.
    8. KTweaker: LED Step Speed 2 - lets you control the steps it takes as it makes the LED brighter/dimmer when in fade mode, play around with it and have fun.
    9. KTweaker: LED Step Speed 3 - lets you control the steps it takes as it makes the LED brighter/dimmer when in fade mode, play around with it and have fun.
    10. KTweaker: LED Step Speed 4 - lets you control the steps it takes as it makes the LED brighter/dimmer when in fade mode, play around with it and have fun.
    11. KTweaker: LED Step Bit Shift - lets you control the main speed that the LEDs go brighter/dimmer when in fade mode, play around with it and have fun.
    12. KTweaker: No all number and text inputs will automatically bring up the keyboard
    13. KTweaker: New KTweakerWFC widget that is a 2x1 widget containing ONLY the Fast Charge toggle
    14. Added BIC TCP Congestion control
    15. Added HSTCP TCP Congestion control
    16. Added HYBLA TCP Congestion control (I will be testing this one today as I heard a couple of reports that i really increases download speeds)
    17. Added HTCP TCP Congestion control
    18. Added VEGAS TCP Congestion control
    19. Added RENO TCP Congestion control
    20. Added SCALABLE TCP Congestion control
    21. Added LP TCP Congestion control (I have been using this one for last 3 days with great speed increase)
    22. Added YEAH TCP Congestion control
    23. Added ILLINOIS TCP Congestion control
    24. WiFi: filter multicast during sleep for AOSP 4.4 to help wifi wakelocks/better deep sleep. All other version already had it so dont ask to add it to other versions.
    25. Linux 3.4.77
    "

    Download

    Source


    (My thanks go to Hawker for bringing this to my attention and stopping me going to the pub. :cheers: )
  13. Sydney99

    Sydney99 Well-Known Member

    So which version do I........
  14. ironass

    ironass Well-Known Member

  15. Sydney99

    Sydney99 Well-Known Member

  16. ironass

    ironass Well-Known Member

    ktoonsez kernels for 4.2.2, 4.3, 4.4.*, for Touchwiz, AOSP and Google Edition, ROMs, updated! :)

    "Change Log 01.23.2014

    1. Stop charging from obeying Fade mode by default
    2. LEDs: Add tunable to set led fade mode while charging. Cycling cable to take effect is required.
    3. AOSP 4.4: gcc-wrapper: force python version 2.
    4. KTweaker 5.2.1 with added led fade mode while charging option.
    "

    Download

    Source



    (Note to Syd... If you are still on Echoe GE, v2.2, ROM... you need the Google Edition version! :rolleyes:)
  17. ironass

    ironass Well-Known Member

    ktoonsez kernels for 4.2.2, 4.3, 4.4.*, for Touchwiz, AOSP and Google Edition, ROMs, updated! :)

    "Change Log 01.31.2014

    1. Optimize journal
    2. Use cortex-a15 build optimizations
    3. Disable VMWare
    4. A bunch of GPU re-writes to make games perform better/more consistent
    5. ktoonservativeq: Make sure gpu_touch_boost does not lower the Mhz if boost is set lower than max
    6. Link GPU throttling to CPU, this makes sure that GPU throttling isnt going for no reason when the CPU isnt even throttling
    7. CM sync
    8. Ramdisk updates
    "

    Download

    Source
    Sydney99 likes this.
  18. ironass

    ironass Well-Known Member

    ktoonsez kernels for 4.2.2, 4.3, 4.4.*, for Touchwiz, AOSP and Google Edition, ROMs, updated! :)

    "Change Log 02.05.2014

    1. Linux 3.4.78.
    2. KTweaker 5.2.3 with 3 new GPU options (GPU Default Mhz, Simple Gov Laziness, Simple Gov Ramp).
    3. GPU: Some more rewrite of the GPU main code and Simple Governor.
    4. GPU: Added GPU Default Mhz so people can choose the Mhz the GPU idles at.
    5. GPU: Added Simple Governor Laziness tunable.
    6. GPU: Added Simple Governor Ramp tunable."

    Download

    Source
  19. Sydney99

    Sydney99 Well-Known Member

    Hope the battery is as good with this as the last version
  20. ironass

    ironass Well-Known Member

    Early indications are good Syd! :D

    Overnight. Stock battery. Just sound off.

    [​IMG]
  21. Hawker

    Hawker Well-Known Member

    only 94.3% deep sleep?
    I regularly get 97.7%
    :p

    You need to kill off all your porn update alerts butty!
    :D
  22. ironass

    ironass Well-Known Member

    Thank goodness! You just reminded me... I'm sending you your book back!

    [​IMG]
  23. ironass

    ironass Well-Known Member

    ktoonsez kernels for 4.2.2, 4.3, 4.4.*, for Touchwiz, AOSP and Google Edition, ROMs, updated! :)

    "Change Log 02.18.2014

    1. KTweaker: MAJOR KTweaker update to 6.0!!!!!!!!
    2. KTweaker: All screen have been re-arranged.
    3. KTweaker: Extras has been totally cleaned OUT and is now called Tools!!! Only items left are "OTA Control", "Get last_kmsg", "Generate a dmesg", "Generate a Logcat", and new "Reboot".
    4. KTweaker: "General" has been renamed to "Main Settings", under here you will find everything in the proper groups (like CPU, GPU, Display, LEDs....).
    5. KTweaker: GPU settings screen now allows you control GPU Mhz Min (replaces the "Default GPU Mhz" option) besides existing Max.
    6. KTweaker: Even though "Voltages" screen can be accessed from main screen like before, you can also access them from the "CPU" and "GPU" settings screens.
    6. KTweaker: Files are now saved as xml files, when you first open Ktweaker it will automatically convert all your old files into new format.
    7. KTweaker: All files are now on your internal /sdcard/KTweaker/.
    8. KTweaker: Profiles are stored /sdcard/KTweaker/Profiles.
    9. KTweaker: Scripts are stored /sdcard/KTweaker/Scripts.
    10. KTweaker: Fixed UI password derp.
    11. KTweaker Widget: The little "R" button on the widget used to be a Refresh button, it is now a reboot button. Click it once to make it display a "Y", click it again and it will reboot into recovery. Take longer than 5 seconds to click it the 2nd time and it goes back to an "R" and resets sequence.
    12. Brand NEW APP called KTmonitor!!!!!!!!!!!!!!
    13. KTmonitor: Use this "floating" app to monitor your CPU, GPU and temperature
    14. KTmonitor: Long hold on the red dot to access the option screen of the app
    15. KTmonitor: General options include Update Speed, back color, text color, outline color.
    16. KTmonitor: Option to LOG the data!!!!!
    17. KTmonitor: Option "UI Type" that lets you choose from 6 different window formats (like Single Line, full, compact....).
    18. KTmonitor: The "-0" or "-1" after the GPU speed represents the current Thermal Throttling state (1 = throttling, 0 = NOT throttling).
    19. CM sync.
    20. ARM: 7668/1: fix memset-related crashes caused by recent GCC (4.7.2).
    21. disable CONFIG_SECURITY_SELINUX_DEVELOP.
    22. bcmdhd: dont filter ip6 in suspend.
    23. rtc: alarm: Add power-on alarm feature.
    24. rtc: alarm: Set power-on alarm 120 sec before actual alarm time.
    25. kernel: alarm: add dedicated alarm type for poweroff alarm.
    26. kernel: alarm: Do not call rtc_alarm_irq_enable in IRQ Disabled context.
    27. board-8064-pmic: enable rtc_alarm_powerup.
    28. sec-battery: Standardize the output of the "online" property.
    29. power: pm8921-charger: vote D0 when running kickstart.
    30. power: pm8921-bms: fix calibration and UVLO issues.
    31. power: pm8921-charger: Add delay after turning on D0 (TCXO) clock.
    32. power: pm8921-charger: Fix delay in USB wall-charger removal.
    33. ktoonservativeq: Change touch boost to make sure it boosts cpu and gpu independently.
    34. Linux 3.4.79.
    35. Linux 3.4.80.
    36. Enable CONFIG_PPP_ASYNC as a module by request from you guys.
    37. Remove KGSL_KERNEL_API_ENABLE that kills min_pwrlevel.
    38. Please feel free to DONATE if you enjoy and find the new KTMonitor app fun and usefull or just appreciate all the work that went into this release and apps

    If you have problems with the KTweaker upgrade, simply delete the /sdcard/ktweaker/ folder to start fresh.
    "

    Please read the changelog, carefully and thoroughly and make a nandroid backup before flashing. Have been on this for over 12 hours, so far, with no problems.

    Download

    Source
  24. Hawker

    Hawker Well-Known Member

    Change Log 02.20.2014
    1. KTweaker: KTweaker update to 6.1.
    2. KTweaker: Fixed some of the display bugs in Governor Adjustments screen.
    3. KTweaker: Added menu options to the main screen for quick shortcuts to CPU, GPU and scheduler Settings screens and an option to reboot.
    4. KTweaker: KTweaker Shop doesnt automatically check for differences now. It is a manual option with menu button so it loads quicker.
    5. Upgraded wifi to 1.88.54, my testers have noticed a nice speed jump and better stability when in low signal areas.
    6. bcmdhd: filter multicast during sleep for ALL VERSIONS for better sleeping.
    7. exfat: Upgrade to 1.2.6.
    8. Fix wireless charging.
    9. Thats all I can remember
    10. TWGE4.4 version: Remove lots more debug dmesg spam for more speed!!!!!!
    11. Touchjiz 4.4: Couple merged items that I forgot from other versions that will speed things up and removed lots of dmesg spam.
    12. Just a heads up guys, THIS WILL BE THE LAST UPDATE FOR TOUCHWIZ 4.2, UPGRADE IF YOU HAVE NOT ALREADY!!!
    webby62, Shotgun84 and ironass like this.
  25. Shotgun84

    Shotgun84 Well-Known Member

    :eek::eek::eek::eek::eek:

    Don't you mean there's a new version up:confused:
Loading...

Share This Page