First here are some helpful IMPORTANT tips:
1. You need to be Rooted. Guide HERE.
2. You need to have CWM. Guide HERE.
3. You should make a backup of your current ROM. Guide HERE.
4. You MUST backup your 3G(If you've already flashed a ICS or JB ROM, this wont backup your 3G). VERY IMPORTANT.. Guide HERE.
DOWNLOADS:
Slim_bean_4.1.2_with_slim_gapps.zip: HERE
Mirror Links:
ROM: https://copy.com/TkWKpgzP4a1e
Gapps: https://copy.com/XTT8CPthpva7
ICS baseband.zip: HERE
-- HERE is the Gingerbread Baseband; if you would like to go back to Gingerbread ROMs, you must first flash this baseband using the same steps
1. Place all required files on your SD Card.
-"ROM".zip, Gapps.zip, and baseband.zip (if it's required).
--Do not extract the "ROM".zip place the zip file on your phone. (Some .zip files contain the ROM and the Gapps, you will need to extract these to recover the "ROM".zip and the Gapps.zip, open the .zip to make sure you see folders inside (data, system, boot, META, etc), not more .zip files)
2. Reboot your phone into "Recovery Mode".
-Power down the device, then hold Power and Volume Up until you reach the Recovery Menu; once there, use the Volume buttons to navigate, and the power button to select.
3. Select "mounts and storage". -Select yes.
4. Select "format /cache". -Select yes.
5. Select "format /data". -Select yes.
6. Select "format /system". -Select yes.
7. Select "format /datadata". -Select yes.
***WARNING; DO NOT FORMAT /SD Card***
8. Select "format /cust". -Select yes.
9. Select "+++++Go Back+++++".
10. Select "wipe cache partition". -Select yes.
11. Select "advanced".
12. Select "wipe dalvik cache". -Select yes.
13. Select "+++++Go Back+++++".
14. Select "wipe data/factory reset". -Select yes.
***If you are on the wrong baseband continue;
if you're on the correct baseband skip to step 17***
15. Select "install zip from sdcard".
16. Select "choose zip from sdcard".
---Navigate to the Baseband.zip and press power to select it.
17. Select "install zip from sdcard".
18. Select "choose zip from sdcard".
---Navigate to the "ROM".zip and press power to select it.
**If you need to install Gapps**
19. Select "install zip from sdcard".
20. Select "choose zip from sdcard".
---Navigate to the Gapps.zip and press power to select it.
21. Select "+++++Go Back+++++".
22. Select "reboot system now".
This can take anywhere from 2 - 10 minutes, please be patient.
Once the phone boots, it is recommended you wait about 5 minutes to let everything load properly.
****UPDATE****
I was finally able to overclock Slim Bean 4.1.2!!!
N00b friendly overclocking guide.
Lets get started:
1. Download the file HERE
2. Unzip the "N00B Friendly Overclocking Slim Rom 4.1.2.zip"
3. Put your phone into Fastboot.
-Power down your phone, then hold the Power & Volume Down buttons for approximately 10 seconds.
4. Plug your phone into your computer.
5. Run the appropriate file for your needs.
*They are named for the result they produce:
-- RUN ME to install OC Kernel.bat
-- RUN ME to restore Stock Kernel.bat
**If you would like to see what these files are doing, you can Right Click, and select Edit.**
**After the first boot with the overclock kernel, I suggest booting into recovery mode and wiping dalvik and cache partitions; reboot and enjoy. **
Linux/Mac users:
-- To install Overclock Kernel:
fastboot flash boot oc_kernel_install.img
-- To restore stock Kernel:
fastboot flash boot Stock_kernel_restore.img
Did I help so much that you want to buy me a coffee?
Do that HERE.
1. You need to be Rooted. Guide HERE.
2. You need to have CWM. Guide HERE.
3. You should make a backup of your current ROM. Guide HERE.
4. You MUST backup your 3G(If you've already flashed a ICS or JB ROM, this wont backup your 3G). VERY IMPORTANT.. Guide HERE.
How to Install Slim Bean 4.1.2
DOWNLOADS:
Slim_bean_4.1.2_with_slim_gapps.zip: HERE
Mirror Links:
ROM: https://copy.com/TkWKpgzP4a1e
Gapps: https://copy.com/XTT8CPthpva7
ICS baseband.zip: HERE
-- HERE is the Gingerbread Baseband; if you would like to go back to Gingerbread ROMs, you must first flash this baseband using the same steps
1. Place all required files on your SD Card.
-"ROM".zip, Gapps.zip, and baseband.zip (if it's required).
--Do not extract the "ROM".zip place the zip file on your phone. (Some .zip files contain the ROM and the Gapps, you will need to extract these to recover the "ROM".zip and the Gapps.zip, open the .zip to make sure you see folders inside (data, system, boot, META, etc), not more .zip files)
2. Reboot your phone into "Recovery Mode".
-Power down the device, then hold Power and Volume Up until you reach the Recovery Menu; once there, use the Volume buttons to navigate, and the power button to select.
3. Select "mounts and storage". -Select yes.
4. Select "format /cache". -Select yes.
5. Select "format /data". -Select yes.
6. Select "format /system". -Select yes.
7. Select "format /datadata". -Select yes.
***WARNING; DO NOT FORMAT /SD Card***
8. Select "format /cust". -Select yes.
9. Select "+++++Go Back+++++".
10. Select "wipe cache partition". -Select yes.
11. Select "advanced".
12. Select "wipe dalvik cache". -Select yes.
13. Select "+++++Go Back+++++".
14. Select "wipe data/factory reset". -Select yes.
***If you are on the wrong baseband continue;
if you're on the correct baseband skip to step 17***
15. Select "install zip from sdcard".
16. Select "choose zip from sdcard".
---Navigate to the Baseband.zip and press power to select it.
17. Select "install zip from sdcard".
18. Select "choose zip from sdcard".
---Navigate to the "ROM".zip and press power to select it.
**If you need to install Gapps**
19. Select "install zip from sdcard".
20. Select "choose zip from sdcard".
---Navigate to the Gapps.zip and press power to select it.
21. Select "+++++Go Back+++++".
22. Select "reboot system now".
This can take anywhere from 2 - 10 minutes, please be patient.
Once the phone boots, it is recommended you wait about 5 minutes to let everything load properly.
****UPDATE****
I was finally able to overclock Slim Bean 4.1.2!!!
N00b friendly overclocking guide.
Lets get started:
1. Download the file HERE
2. Unzip the "N00B Friendly Overclocking Slim Rom 4.1.2.zip"
3. Put your phone into Fastboot.
-Power down your phone, then hold the Power & Volume Down buttons for approximately 10 seconds.
4. Plug your phone into your computer.
5. Run the appropriate file for your needs.
*They are named for the result they produce:
-- RUN ME to install OC Kernel.bat
-- RUN ME to restore Stock Kernel.bat
**If you would like to see what these files are doing, you can Right Click, and select Edit.**
**After the first boot with the overclock kernel, I suggest booting into recovery mode and wiping dalvik and cache partitions; reboot and enjoy. **
Linux/Mac users:
-- To install Overclock Kernel:
fastboot flash boot oc_kernel_install.img
-- To restore stock Kernel:
fastboot flash boot Stock_kernel_restore.img
Did I help so much that you want to buy me a coffee?
Do that HERE.