What cmd did you use to build it?thanx for the tip ont he config.gz reppard.
i have the srouce, and i have the config, and i have a replacement synaptics_i2c_rmi.c file that looks to have the right calls, i edited it a bit to update TOUCH_MAJOR to PRESSURE, not sure if that is going to work or not.. but, im trying to build the kernel, is there anything i need to do this? i did some reasearch, and installed a bunch of stuff to cross compile, however i am still getting this error:
make: arm-eabi-gcc: Command not found
CHK include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-arm
CC kernel/bounds.s
/bin/sh: arm-eabi-gcc: not found
make[1]: *** [kernel/bounds.s] Error 127
make: *** [prepare0] Error 2
new to this kernel thing... thanx in advance again
I use the following:
Command to build kernel and modules at once. Edit paths accordingly.
make ARCH=arm CROSS_COMPILE=~/Android/cyanogen/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi- INSTALL_MOD_PATH=~/Android/Kernels/modules zImage modules -j4
And then install to the desired directory.
make ARCH=arm CROSS_COMPILE=~/Android/cyanogen/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi- INSTALL_MOD_PATH=~/Android/Kernels/modules zImage modules modules_install -j4
of course you will have to edit your path and defconfig name, and edit any changes they may be in the ics src, tho from what I have its still in the same place.
Also my defconfig is in arch/arm/configs/plague_defconfig
Upvote
0