Alrighty...here it is. Received the Note II specific docks from ebay today. After opening them up, I realized that there was a way to customize them along with the richter mount I purchased.
Just so you all can follow exactly what I either had before or purchased recently, here's what's needed in order to get the same/similar type of setup:
1) ProClip vehicle specific mount
Car & Vehicle Mounts*-*ProClip Car Mounts for Mobile Phones, Tablet, and Handheld Devices
- Depending on your vehicle, the purpose of the vehicle specific mount is just the "base" of the mount/dock that you'll be connecting it to. It's basically a piece that attaches to different areas of your car (varies based on whichever vehicle you own). These vehicle specific mounts do not require any drilling/screwing holes into your dash
2) Richter Pattern iGrip Swivel
iGrip / Herbert Richter (HR) Standard AMPS Pattern In-Dash Vehicle Swivel Mount | eBay
3) Note II specific car air vent mount
Car Air Vent Mount Holder Stand Kits For Samsung GALAXY NOTE 2 II N7100 | eBay
So, now that you know the parts, I can refer to the numbers to describe what I did. This was the process:
Right Side Mount
A) Mount #1 Purchased the mount that covers the vent because the vents actually keep the phone cool, when driving around, and also because it's the shortest distance for me to reach without having to stretch.
B) Mount #2 on Right side vent with #1. There are 4 screws that get screwed into #1
C) Mount #3 (Note II holder only) onto #2 mount once #2 mount is locked in w/ screw locking mechanism.
Driver's Side Mount
A) Mount #1 Had already been mounted previously for my Motorola Photon dock
B) Take #2 and unscrew the base that will connect to #1 from #2 richter mount portion.
C) Take #2 (base only), put it to the side, as you'll need it later. Take #2 (richter mount portion only) and put away, as it won't be needed.
D)Take #3 (Note II Holder) and put to the side for mounting later.
E) Take #3 (Entire vent mount) and remove/unscrew the swivel adjustment and locking mechnism extension w/ Richter mount.
F) Take #3 (Vent Connector only) and put it to the side, as you will no longer need it.
F) Take #3 (Swivel Adjustment, locking mechanism, & Richter Mount) and attach it to #2 (base only) using the screw that connected #3 (vent connector) to the #3 (swivel/lock/richter).
G) Take newly formed "extended" mount and screw into #1 using the 4 screws.
H) Lock in position/angle for mount and mount Note II holder.
Seems really complicated, but it really isn't at all. Pretty straight forward (took me a few minutes to figure out how to connect the extension with the base). In the end, I have a mount on the driver side that is pushed closer to where my hands would be on the steering wheel and the other mount a little further away. Here are some pics:
Passenger side mount
"Modified" Drivers side Mount and Base, prior to screwing into ProClip mount:
"Modified" Drivers side Mount connected to ProClip mount:
Final setup with "Modified" mount (Drivers side) and Regular iGrip mount (passenger side)
Once iBolt shows what they've come up with, I may be parting with one of these mounts, so I'll let you all know if I'll have either or both available.