• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [H631/MS631] CyanogenMod 12.1 for LG G Stylo

200 I believe
d83a0c6b6c90cd2a65381017e054fdee.jpg
Stock itself sets the minimum to 800mhz as this is the default qualcomm recommended value. Not sure if I should lower it unless there is a specific reason to.

https://www.codeaurora.org/cgit/qui...t.qcom.post_boot.sh?h=LA.BR.1.1.3_rb1.45#n534

I've been taking a look at the boost mobile update their kernel source does update all variants properly. The blobs may or may not work not sure if our camera HAL was the same but they did ship all proper camera blobs for both. I'm awaiting on a system dump to compare.
 
Alright I really wasn't sure of that, which frequency was lowest wasn't something I really noticed. Appreciate your work on this though.
 
Are there still any nonworking parts to this CM ROM? I checked OP but wanted to get third party input in case N/W post is inaccurate

Couldn't give less of a $hizz about video or notification LED. Functioning GPS is my selling point :(
 
Remember the cm Rom is using a cm kernel it's not stock.
Well this is the part that confuses everyone. What if I told you the kernel was stock? It's stock merged on top of the caf base it came from. The base is the point in which LG took their source and made it work on their device. We do this so we can continue to merge with qualcomm/caf upstream work. As far as the 800mhz thing the script specifically sets it to 800mhz this is for all 8916/8939 devices https://github.com/TeamRegular/andr...ob/cm-12.1/rootdir/etc/init.qcom.power.rc#L23 I have no problem allowing 200mhz if it's stable I'm just going by what qualcomm and cm find to be stable. The script is set on boot you could always "echo 200000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq"
CM power HAL is also strict. They have profiles that restrict such things. If everyone wants it I'll most definitely add support.
 
Last edited:
Well I've learned something and your right that is confusing. Thanks for explaining that to me. Like I said I really liked your cm build and I never got the sleep of death with it. I think that 200mhz would be great and I believe that it's worth testing. I would also be happy to test that for you.
 
Ok ao i am having a problem when i install the 12 29 cm it works fine but i notice that i lose my wifi conection alot even when im wright next to my rooter and also my metro network can anyone help
 
Ok ao i am having a problem when i install the 12 29 cm it works fine but i notice that i lose my wifi conection alot even when im wright next to my rooter and also my metro network can anyone help

I had similar experience but it was due to Verizon poor service/ router issue.

When Wifi suddenly goes down check with your other devices (PC, Tablet or other phone) and cross test if it's really Stylo phone issue or modem/router issue.
 
Cool, I'm on Brady's latest build and have a Stylo with the new screen, don't mean to impose but I understand you and someone else were guiding him along with builds?
 
I had similar experience but it was due to Verizon poor service/ router issue.

When Wifi suddenly goes down check with your other devices (PC, Tablet or other phone) and cross test if it's really Stylo phone issue or modem/router issue.
No it not rooter or my pc my phone is just fine except when i go to cm 12 because my computer is ok and when i put katana its still ok
 
Back
Top Bottom