sammyz
LG Whiz Kid
Ok, this phone does not unbrick the same way as most other LG phones will.
You will need:
Drivers installed- https://www.box.com/shared/32c5t7fj2w8xcwr0krjo
LG Firmware: www.oudhitsquad.com/android/LGE/Firmware/LG870/LG870ZV4_06.zip
LG Flash Tool (read the Readme!): Flash Tool Setup
LG DLL for LG Flash Tool: https://www.mediafire.com/?tnda5my51o6gq76 - thanks to rally 517 for sharing his copy
Alternative Link:
This has everything above in one zip file:
http://osp.zerounix.net/lg870-flashtools.zip
Thanks to tryptaminion
This guide is intended for windows users. There is no way to unbrick this phone unless you are on windows due to the software being used for flashing only made for windows.
Phones Don't fix themselves
Please Donate
You will need:
Drivers installed- https://www.box.com/shared/32c5t7fj2w8xcwr0krjo
LG Firmware: www.oudhitsquad.com/android/LGE/Firmware/LG870/LG870ZV4_06.zip
LG Flash Tool (read the Readme!): Flash Tool Setup
LG DLL for LG Flash Tool: https://www.mediafire.com/?tnda5my51o6gq76 - thanks to rally 517 for sharing his copy
Alternative Link:
This has everything above in one zip file:
http://osp.zerounix.net/lg870-flashtools.zip
Thanks to tryptaminion
This guide is intended for windows users. There is no way to unbrick this phone unless you are on windows due to the software being used for flashing only made for windows.
- Put your LG in download mode:
While powered off, volume up + plug in USB (thanks sortoh85). Connect a trustworthy USB cable - Open up LG Flash Tool
- Tick "Select Manual Mode"
- The DLL selected is called "LG870_20130528_LGFLASHv151.dll", find where you extracted that to
- Select Add, choose the tot file you downloaded.
- Press ok.
- Read instructions here on how to configure the COM Port and flash: LG Flash Tool - Free - no need B2B User/Pass - GSM-Forum
Phones Don't fix themselves
Please Donate