** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **
Requirements
- Drivers
- LG Flashtool
- KDZ Firmwares(Link 1 , Link 2 , Link 3 )
- If you're on Europe and can't find a firmware for downgrading use this folder (Only from EUROPE!)
- Take care by downloading the correct firmware. The links i add are for 4G version.
Instructions after the downloading.
- Install Drivers
- Unrar LG Flashtool.rar
- Download Kdz firmware and copy to the LG Flashtool Folder.
- Remove the battery and put it back in.
- Hold the Volume Up button (ONLY) while connecting to the USB cable
- The Volume Up button needs to be hold until it reaches the download mode section
- Open Device Manager (If you don't know how check #2 Post)
- Change the LGE Mobile USB Serial port to COM 20
- Open Flash Tool
- Select Type: 3GQCT
- PhoneMode: EMERGENCY
- KDZ : The kdz you download. It must be at same folder as the LG Flash tool!
- Click on Normal Flash
- Click on Clear update registry
- Country: Different Country
- Language: English
- Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. You can remove USB cable, your device will boot normally, and the device is no longer stuck in a boot loop.
If you're having trouble with the instructions after downloading check the screenshots in the #2 post!
Last edited: