Unlocked bootload and CM10

[zhou qiang]

after the flashing it says my sdcard is broken
i changed another sdcard, it did not work either

 

[zinkscott]

I fixed my games lag issue. I set my CPU to 1188 MHz and governor to PERFORMANCE. Anything else, lag.

 

[Kiwasad]

My phone is stuck at the Cyanogen mod boot animation. I formated the data and all that fun stuff. I tried pulling the battery and stuff but still wont go past it.

 

[stcarlso]

My phone is stuck at the Cyanogen mod boot animation. I formated the data and all that fun stuff. I tried pulling the battery and stuff but still wont go past it.

It might take a good five to ten minutes on that screen, especially if you installed the google apps and/or restored a backup. If it takes longer than that, a dmesg and logcat using ADB during the hang would be helpful to reproduce the issue.

 

[stcarlso]

I'm working on the front cam in those few minutes of free time I can muster, and you are right in believing that it is a kernel issue (but that hasn't stopped us, the display was a kernel issue that took a while as well). Even if it doesn't get fixed soon, by Saturday I should have an A2 rom that fixes the power-off charger issue, adds a few kernel features, and makes an attempt at getting the wireless charging cover working.

I have a lead on the front camera. Could someone on stock ICS pull the file "/system/build.prop"? There are some non-standard properties in there that the camera libs use. Please note whether you are on ZV7 or ZV8 when posting.

 

[Victor19911001]

The link has been sent, check it out!

 

[Victor19911001]

I have a lead on the front camera. Could someone on stock ICS pull the file "/system/build.prop"? There are some non-standard properties in there that the camera libs use. Please note whether you are on ZV7 or ZV8 when posting.

The link has been sent, check it out! This is in ZV7

 

[coned_miro]

Did a factory erase/wipe and then started from scratch

everything works fine up until after I install the b1 rom - reboots, I can see the LG logo, then black.....

my PC sees it when I plug it in via USB but it's just sitting at black right now

-edit:
going to start from scratch and try reflashing everything

 

[Alexminatl]

Did a factory erase/wipe and then started from scratch

everything works fine up until after I install the b1 rom - reboots, I can see the LG logo, then black.....

my PC sees it when I plug it in via USB but it's just sitting at black right now

-edit:
going to start from scratch and try reflashing everything

I'm pretty sure you want the a1 rom

 

[coned_miro]

EDIT: OK that worked a lot better, now I'm just waiting to get past the Cyanogen[mod] boot screen

 

[coned_miro]

What would be the best way to get you a logcat for my boot problem? I have SDK-Tools and Platform-Tools instaLLED....

[it won't go past the cyanagenmod spinning circle]

 

[schlabie]

What would be the best way to get you a logcat for my boot problem? I have SDK-Tools and Platform-Tools instaLLED....

[it won't go past the cyanagenmod spinning circle]

I have the cyanogen spinning circle problem as well. On 2.3.6, but my battery died and now it wont turn on.

 

[stcarlso]

What would be the best way to get you a logcat for my boot problem? I have SDK-Tools and Platform-Tools instaLLED....

[it won't go past the cyanagenmod spinning circle]

Hmmm, that's 3 people with the same issue. If you have the tools installed, do another wipe data/factory reset in CWM, reboot while connected via USB, then open a Terminal/command prompt. After the phone has been on for about five minutes, run:

[HIGH]
adb shell dmesg > dmesg.txt
adb logcat > logcat.txt
[/HIGH]

Then press CONTROL + C after about 5 seconds of running the second command. Two new files should have appeared in the directory where the command prompt started; attach or post these two files and I'll take a look into why some lucids are hanging at boot.

 

[coned_miro]

Best way to boot to recovery??? Vol Down + Power???

EDIT: nvm got it working using ADB, will continue on to next post

 

[Alexminatl]

Okay! I'm finally on the ROM, thing is, I've never used cm before and I cant seem to find the play store.

edit: Don't mind me, I jump into things too quickly sometimes and don't always read the full instructions. I found the google apps package.

 

[coned_miro]

Welp, guess I can't give you the logcat because after teh second factory wipe/reset I booted into the ROM! Boom, if you still want one, I can try and redo everything just to get one for you

 

[Connorh333]

Okay! I'm finally on the ROM, thing is, I've never used cm before and I cant seem to find the play store.

you need to flash the gapps.

 

[coned_miro]

SOOOOO I totally just used the front camera...

4.2 Camera on 4.1 worked perfectly...

EDIT: let me rephrase, after installing the 4.2 camera, the normal camera works

EDIT2: Panorama works, so does video

 

[zinkscott]

SOOOOO I totally just used the front camera...

4.2 Camera on 4.1 worked perfectly...

EDIT: let me rephrase, after installing the 4.2 camera, the normal camera works

EDIT2: Panorama works, so does video

You used the Android Jellybean 4.2 Camera App on this ROM? If that's so, how?

 

[coned_miro]

I installed it but it didn't work, however it made the normal 4.1 app show up and work...

If I remember correctly they were saying the front camera doesn't work in this version but mine definitely does

 

[zinkscott]

I installed it but it didn't work, however it made the normal 4.1 app show up and work...

If I remember correctly they were saying the front camera doesn't work in this version but mine definitely does

How did you install it? Could you write out the steps so I can try and see if this was just a fluke or this could be a temporary fix.

 

[coned_miro]

IGNORE PLEASE, sorry in all my hype I got front and rear cameras confused.

i Iz dumb

 

[platinumthomas]

Edit: After speaking with my wife this morning, her Lucid was having issues staying connected to the Wifi. I reset my router settings and everything is good to go

My Wifi connection keeps dropping. It'll stay connected for 10 seconds to about 2 mins. It appears to drop the connection immediately if the status bar goes away or displays an alert, which seems really odd. When I tried to pull a file from Box, an alert would pop up and the connection would be severed. I was in Dolphin full screen mode, the connection dropped. I took the browser out of full screen mode and the connection dropped after about 2 mins.
Any ideas why this is happening? I've power cycled my router after disabling the ACL settings. My laptop and my wife's other Lucid remain connected to the Wifi w/out issue.

 

[cygnetmyo]

Hi Anyone knows about adding GSM/WCDMA radio in Lucid?
I saw the Lucid processor Snapdragon MSM8660 support GSM/WCDMA, by adding it. the phone can be used in worldwide.

en.wikipedia.org/wiki/Snapdragon_(system_on_chip)#Snapdragon_S3

 

[stcarlso]

Hi Anyone knows about adding GSM/WCDMA radio in Lucid?
I saw the Lucid processor Snapdragon MSM8660 support GSM/WCDMA, by adding it. the phone can be used in worldwide.

en.wikipedia.org/wiki/Snapdragon_(system_on_chip)#Snapdragon_S3

You can try the GSM auto mode in the CM10 network menu, but there's a good chance it won't work for want of an antenna. GSM has a different frequency which will probably not work on the Lucid's antenna.