• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [ROM] ApeX V1.0 for Droid X - An AOSP Experience (10/20/10)

Anybody having a problem with the Messaging app? Sometimes if I click on said person it opens up a different persons thread. Also If I am on the home screen and click to open SMS it often takes me to my last open program? IT fiexes with a reboot but comes back after a couple hours

Mine sometimes opens another person. I also get battery force closes pretty often, but that's no different than Moto's 2.2.
 
Upvote 0
Awesome program that I use whenever I pull down a big HD movie and want to convert to a resolution and file size that makes sense for the X. I've found it takes quite a while though, so I got accustomed to letting the moto interface convert files for me when I move them. Oh well, sounds like I need to get familiar with Handbrake again.

Do you know if I can setup a batch of file conversions with Handbrake?

Yep, just add files to the queue and press start when you're ready.
 
  • Like
Reactions: t0adman
Upvote 0
ok, well i have having a problem here. I have rom manager, and plan on installing it that way. i do NOT have bootstrap. anyway, when i open up rom manager and click on install from sd card, i select the file and it prompts me to restart, which i do. then the phone just restarts normally and doesnt go into clockworkmod. i am rooted and deodexed running OTA 2.2. is there something i am doing wrong with rom manager, or is my phone just stupid. any help is very appreciated.
 
Upvote 0
Install from RM won't work. You can download from RM, but then you have to follow install instructions in OP

You sure?

I DL'd it and everything went okay... :thinking:

Running it now.

Edit: Screen shot for proof.
CAP201010272009.jpg
 
Upvote 0
Fab's overclock settings did not work for me either. I tried customizing setscaling.sh, and was pretty stable running 1.1Ghz at 62 volts, but still experienced some reboots. With JRummy's app I've been running 1.3Ghz at medium voltage all morning. Quad score is 1600+, battery life is good.

I'm thinking many of us who think our DXs are duds because we can't OC above 1.1Ghz are actually being too gentle with our voltages. I suggest using JRummy's app at medium voltage to see how fast you can run, then easing the voltages back from there if you want to tweak. Take a look at the voltages JRummy is using at his medium setting:

OCfreqs.png


Fab, Would you consider adding a "medium" option to the ApeX OC scripts based on these voltages that seem to work for some of us who haven't been successful with the existing options?
I have tried voltage into the 80's but I would never run that daily and it still froze. So what's the point. Also 1600+ at 1.3 is nit that great. I get average scores of 1622 at 1.15 and 1660 at 1.18 witch is the top of my DX's stable range
 
Upvote 0
Fab's overclock settings did not work for me either. I tried customizing setscaling.sh, and was pretty stable running 1.1Ghz at 62 volts, but still experienced some reboots. With JRummy's app I've been running 1.3Ghz at medium voltage all morning. Quad score is 1600+, battery life is good.

I'm thinking many of us who think our DXs are duds because we can't OC above 1.1Ghz are actually being too gentle with our voltages. I suggest using JRummy's app at medium voltage to see how fast you can run, then easing the voltages back from there if you want to tweak. Take a look at the voltages JRummy is using at his medium setting:

OCfreqs.png


Fab, Would you consider adding a "medium" option to the ApeX OC scripts based on these voltages that seem to work for some of us who haven't been successful with the existing options?

I got the exact opposite results. I couldn't get past 1.1GHz using stock or higher voltage. I found I'm stable using the Ultra Low Voltage 1.2GHz. 1600+ in quadrant, great battery life. 1.2GHz on medium or high voltage resulted in a turtle every time.
 
Upvote 0
So there's no need to mount system before installing?

Sorry, I didn't have much time to go through the rest of the posts.

but is it possible to customize the given pre-overclock If so, please direct me to the correct method (if there is more than one). I'm getting hype over the new overclock stuff.

I've been away from this forum for a long time because of other stuff that's been catching up with me.
 
Upvote 0
So there's no need to mount system before installing?

Sorry, I didn't have much time to go through the rest of the posts.

but is it possible to customize the given pre-overclock If so, please direct me to the correct method (if there is more than one). I'm getting hype over the new overclock stuff.

I've been away from this forum for a long time because of other stuff that's been catching up with me.

As far as the custom overclock goes all you have to do is go into terminal emulator and type su overclock and a list of commands fab has put in there will come up then just follow them to have over clock on or off (after reboot)....and if you want to overide his just turrn it off and get one of the overclock apps from the market which are droid x/2 overclock or dx/ d2 overclock and select one of the presets that may work for you
 
Upvote 0
So there's no need to mount system before installing?

Sorry, I didn't have much time to go through the rest of the posts.

but is it possible to customize the given pre-overclock If so, please direct me to the correct method (if there is more than one). I'm getting hype over the new overclock stuff.

I've been away from this forum for a long time because of other stuff that's been catching up with me.

all you had to do is read the 1st post. He updated the instructions


Installation Instructions: Please have a nandroid of your current setup in case this is not for you :)

*RC2 users may forgo the wiping of data if they so choose. If there are issues, then please do try wiping data and cache.

-Place file on sdcard. Install ROM from sdcard in ROM manager. Wipe data and cache.

OR

-Place file on your sdcard. Bootstrap recovery and reboot recovery
-Navigate to mounts and storage. FORMAT data, and cache
-Return to previous menu and install .zip from sd card
-Choose ApeX and install!
 
Upvote 0
has anyone had issues with the overclock not taking? really don't want to have to flash an sbf. couldn't i restore a nandroid instead?

I don't think I've had any reports of the overclock not taking at all, but a very small minority that are very unstable (reboots like every 10 minutes). That being said, 10 minutes is plenty time to disable the feature in terminal emulator :)
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones