• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

How to solve this flaw in the Firmware Upgrade via ODIN

cradino

Newbie
Jun 15, 2013
16
0
Os meus problemas são sempre exclusivos. Encontram-se descritas soluções para várias falhas no processo de Firmware upgrade via ODIN mas só a mim me coube a falha no aboot que se repete e nunca abandona nem sequer permite o HARD RESET. Enquantoa bateria tiver encaixada e com carga esta imagem estará sempre ativa com estas incrições na tela do Samsung Galaxy S4 Mini GT-I9195XXUCNK1:
odin mode
product name:GT-I9195
CURRENT BINARY:SAMSUNG OFFICIAL
KNOX KERNEL LOCK:0X0
KNOX WARANTY VOID:0X1
CSB-CONFIG-LSB:0X30
BOOT LOADER AP SWREV:2
WRITE PROTECTION: Enabled

E mais abaixo e ao meio da tela a orientação para a recuperação de emergência pela aplicação Kies da Samsung com estas indicações e desfechos indicados nesta imagem de imgur.
Tentando no menu ferramentas executar o segundo comando tudo se resume em mais uma imagem do imgur aqui linkada.

Entretanto no ODIN se for lançado de novo o flash o resultado volta a ser este:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
http://www.droidviews.com/?s=aboot.mbn
 
My problems are always unique. Are described solutions for multiple failures in the Firmware upgrade process via ODIN but my fit aboot failure that repeats itself and never leaves nor even allows the HARD RESET. While your battery has docked and under load this image is always active with these inscriptions on the screen of the Samsung Galaxy S4 Mini GT-I9195XXUCNK1:

The rest is already in English...

And further down and to the middle of the screen orientation for emergency recovery by applying Kies from Samsung with these indications and outcomes indicated in this image http://i.imgur.com/MNC8pmE.png
Trying on the Tools menu to run the second command it all boils down to one more http://i.imgur.com/krhbXmT.png linked here.
The rest is already in English...
 
Upvote 0
yYiOOYo.png
 
Upvote 0
The translation:

apoiocliente@vodafone.com <apoiocliente@vodafone.com>
18 Feb (3 days Ago)

for me, dear Sir, we thank you in advance Troy Lucas the email I sent us which deserved our utmost attention.

Regarding your question, confirm that your OR160023669, is in progress, and that the equipment in question has already been sent to the helpdesk.

The technical assistance tried to get in touch with you yesterday to provide the budget for the repair of your equipment in the amount of € 157.98 (main board replacement Budget). This is because, according to indicate loss of equipment due to manufacturer warranty present routing traces (installed software version not approved by Samsung).

If you would like more clarification or accept the budget and follow-up the repair, you must contact the Technical assistance number you sent the SMS.

We are always available for any further clarification.

Greetings Maria Morcela customer service
 
Upvote 0
My Galaxy S4 Mini to run this process only to restore the original ROM forever in the same spot, and Samsung refused to Vodafone cover the repair by ROOT evidence and I refused to pay and the unit returned not repaired - http://bit.ly/S4-mini-avariado: <ID:0/005> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> I9195XXUCNK1_I9195VFRCNE4_I9195XXUCNK1_HOME.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/005> Odin v.3 engine (ID:5).. <ID:0/005> File analysis.. <ID:0/005> SetupConnection.. <ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start.. <ID:0/005> SingleDownload. <ID:0/005> sbl1.mbn <ID:0/005> NAND Write Start!! <ID:0/005> sbl2.mbn <ID:0/005> sbl3.mbn <ID:0/005> aboot.mbn <ID:0/005> FAIL! <ID:0/005> <ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones