***IF THIS HELPS YOU HIT THE THANKS BUTTON!! ITS LITERALLY ONE CLICK!***
Rooting the Fusion 2 Step by Step, by Shagerty
Step 1 : Download this file here.
Step 2 :Put the Huawei Fusion 2 Recovery Root.zip on your desktop.
Step 3 :Download and install the Huawei Fusion Drivers. Install By running the .exe here.
Step 4 :Make a folder called "Huawei Fusion 2" on your desktop.
Step 5 :Extract Zip from step 2 into your fusion 2 folder.
Step 6 :Turn off phone.
Step 7 :Reboot fastboot by holding Volume Down and Power buttons simultaneously for 10-20 seconds.
(It will freeze at ATT logo. This is fastboot, it's a freeze to be happy about)
Step 8 :Connect phone to computer.
Step 9 :Open the folder you made and open the extracted zip (if you haven't extracted do this now)
Step 10 : Double click "Run Me"
Step 11 :Type "fastboot devices" and hit enter this will confirm if you are connected via fastboot (you are) if your connected it will list some numbers and letters and the words fastboot next to the numbers and letters.
Step 12 :Now flash modified recovery by typing "fastboot flash recovery recovery.superrecovery.img" into the "run me" window and hitting enter.
Step 13 :Unplug after the process runs says finished. And gives you the total time.
Step 14 :Remove back of phone and take out battery for 10-15 seconds.
Step 15 :Reinsert battery hold volume up and power button simultaneously until it boots into recovery (15-20 seconds of holding both buttons)
Step 16 :Reboot Device by selecting the "reboot device" option with the volume buttons (it should already start with reboot highlighted) so just press the power button to reboot.
Step 17 :Grab a beer and relax as your device reboots with SuperSU (main root app)!
Step 2 :Put the Huawei Fusion 2 Recovery Root.zip on your desktop.
Step 3 :Download and install the Huawei Fusion Drivers. Install By running the .exe here.
Step 4 :Make a folder called "Huawei Fusion 2" on your desktop.
Step 5 :Extract Zip from step 2 into your fusion 2 folder.
Step 6 :Turn off phone.
Step 7 :Reboot fastboot by holding Volume Down and Power buttons simultaneously for 10-20 seconds.
(It will freeze at ATT logo. This is fastboot, it's a freeze to be happy about)
Step 8 :Connect phone to computer.
Step 9 :Open the folder you made and open the extracted zip (if you haven't extracted do this now)
Step 10 : Double click "Run Me"
Step 11 :Type "fastboot devices" and hit enter this will confirm if you are connected via fastboot (you are) if your connected it will list some numbers and letters and the words fastboot next to the numbers and letters.
Step 12 :Now flash modified recovery by typing "fastboot flash recovery recovery.superrecovery.img" into the "run me" window and hitting enter.
Step 13 :Unplug after the process runs says finished. And gives you the total time.
Step 14 :Remove back of phone and take out battery for 10-15 seconds.
Step 15 :Reinsert battery hold volume up and power button simultaneously until it boots into recovery (15-20 seconds of holding both buttons)
Step 16 :Reboot Device by selecting the "reboot device" option with the volume buttons (it should already start with reboot highlighted) so just press the power button to reboot.
Step 17 :Grab a beer and relax as your device reboots with SuperSU (main root app)!
Enjoy and thanks to robotic buddy for initial guide and download links, also special thanks to RFE for the 1st Root method on the Huawei Fusion 2!
*********IF IT SAYS WAITING FOR DEVICE, IT IS ONE OF FOUR THINGS;
1) YOU DID NOT PUT THE PHONE INTO FASTBOOT CORRECTLY GO AHEAD AND REPEAT STEP 7 THEN RETRY,
2) YOU SIMPLY NEED TO UNPLUG AND REPLUG PHONE AND WAIT APPROXIMATELY 25-30 SECONDS (SHOULD HAPPEN IMMEDIATELY UNLESS DRIVERS WHERE INSTALLED INCORRECTLY),
3) INCORRECTLY INSTALLED ADB DRIVERS, REINSTALL THE ADB DRIVERS FROM STEP 3,
4) YOU DID NOT NAME THE FOLDERS CORRECTLY, OR DIRECTED THE CMD TERMINAL TO THE WRONG FOLDER, MAKE SURE YOU FOLLOW EVERY STEP TO A T INCLUDING CAPITALIZATIONS, SYMBOLS, AND SPACES OF FOLDERS AND CMD PROMPTS*********
*********IF IT SAYS WAITING FOR DEVICE, IT IS ONE OF FOUR THINGS;
1) YOU DID NOT PUT THE PHONE INTO FASTBOOT CORRECTLY GO AHEAD AND REPEAT STEP 7 THEN RETRY,
2) YOU SIMPLY NEED TO UNPLUG AND REPLUG PHONE AND WAIT APPROXIMATELY 25-30 SECONDS (SHOULD HAPPEN IMMEDIATELY UNLESS DRIVERS WHERE INSTALLED INCORRECTLY),
3) INCORRECTLY INSTALLED ADB DRIVERS, REINSTALL THE ADB DRIVERS FROM STEP 3,
4) YOU DID NOT NAME THE FOLDERS CORRECTLY, OR DIRECTED THE CMD TERMINAL TO THE WRONG FOLDER, MAKE SURE YOU FOLLOW EVERY STEP TO A T INCLUDING CAPITALIZATIONS, SYMBOLS, AND SPACES OF FOLDERS AND CMD PROMPTS*********