it does not come with busybox. Just press the problems button in titanium backup and it will install busybox for you
Excellent. That was it. Thanks a bunch.
Upvote
0
it does not come with busybox. Just press the problems button in titanium backup and it will install busybox for you
I keep getting an error from RSD. I can't find any real answers for it on google, and the link you posted didn't help. I did run it as admin, I tried it in safe mode, I re-downloaded the sbf file a couple times and I did a battery pull a couple times.
The error is:
Failed flashing process. Failed Flashing Process. Error processing flash file. (0x700F); phone connected.
That didn't work. I forgot to mention that I didn't get the OTA update, I found a manual install one on another site, could that be causing the issue?One thing you could try which has worked for some although it doesnt make much sense that it would work is uninstall the motorola drivers and try again without the drivers installed.
That didn't work. I forgot to mention that I didn't get the OTA update, I found a manual install one on another site, could that be causing the issue?
That didn't work. I forgot to mention that I didn't get the OTA update, I found a manual install one on another site, could that be causing the issue?
I'm actually on 32bit 7. But I do have a couple other PCs I could try it on, I didn't even think about doing thatDo you by chance have another computer you can try it on. I know some Win764bit users can just never get RSD to work
Thanks for the guide. Unfortunately, I can't get the SPRecovery to load through RSD Light.
It gets hung when it says:
waiting for re-enumeration
The error is:
failed flashing process. failed flashing process. Phone did not re-enumerate after RAM-downloader was sent. (0x703e); Phone disconnected...
Any ideas or help would be appreciated....
I got it to work. ( thanks for the great guide!!! ) I though I would share what I found. I had installed Easy Tether on the computer. Just after RDS sends the RAM thing it very quickly drops the USB connections then re-connects. Easy tether was interfering with this. I disabled it and it worked exactly like the guide. I now have ROOT and FRG22....
Thanks for all of the help and suggestions...
Now I have to figure out what programs I need now that I am rooted.....
I know I need ROM Manager and titanium backup. Is there anything else I need????
Setcpu is the other one that I would consider a MUST
Ok, so I'm probally going to take the plunge and root my phone tomorrow at work (no PC at home).
My only remaining concern is that after getting a taste of root, I will want to try some custom firmware at some point. If after getting root access on the stock 2.2 with this method, is there a straight forward upgrade path to custom roms?
Thanks I got it... Can you change the CPU in FRG22??
Need help
Can't enable USB mass storage.
It doesn't say anything. I just can't access card on the droid.
I followed the guide and everything worked perfectly. However I tried to boot into recovery to make a backup and the M would come on, stay for a while, and then shut off. If I don't hold 'x' everything boots fine. Any ideas on what I could do to get into recovery?
i am stuck,after i transfer rom to the sd card and then go to install says.aborted,error in sd card /update .zip.status 7.can i just flash it back to 2.1 or can i not get to that menu
http://androidforums.com/all-things-root-droid/136508-guide-all-things-root-related.htmli downloaded both of the ones you had in your post and have the same result
got it i think i named it update with nothing else and it is taking it.have no idea if that was it or not but it went thru
We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.